Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Data solubility and parameters of adjustments (α and β) of phenanthrene in supercritical CO₂ employing the modified Redlich-Kwong equation.

ABSTRACT: This article contains data related to the research article entitled "Calculation method for determining Phenanthrene solubility in supercritical CO₂ employing Redlich-Kwong modified equation" (Colpas et al., 2018) [1]. The presented data gives information on the physical properties of the solute and the solvent. The experimental solubilities of phenanthrene in equilibrium and those calculated using the modified Redlich-Kwong equation with the inclusion of the adjustment parameters α and β are shown, see Colpas et al. (2018) [1] and "Modified Redlich-Kwong equation of state for supercritical carbon dioxide" (Heidaryan and Jarrahian, 2013) [7]. The mean squared error (MSE) was calculated for the supercritical Phenanthrene-CO₂ system at different temperatures above the critical point of the solvent.

SUBMITTER: Colpas-Castillo F

PROVIDER: S-EPMC6214833 | biostudies-literature | 2018 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Data solubility and parameters of adjustments (α and β) of phenanthrene in supercritical CO2 employing the modified Redlich-Kwong equation.

Colpas-Castillo Fredy F Tarón-Dunoyer Arnulfo A González-Cuello Rafael R

Data in brief 20181017

This article contains data related to the research article entitled "Calculation method for determining Phenanthrene solubility in supercritical CO2 employing Redlich-Kwong modified equation" (Colpas et al., 2018) [1]. The presented data gives information on the physical properties of the solute and the solvent. The experimental solubilities of phenanthrene in equilibrium and those calculated using the modified Redlich-Kwong equation with the inclusion of the adjustment parameters ...[more]

PMID: 30406162

Similar Datasets

Solubility of vitamin A in supercritical CO2: experimental study and thermodynamic modeling.

Project description:One of the best methods of extracting Vitamin A, as a helper of the immune body system and vision, was measured in supercritical carbon dioxide (SC-CO2); Mole fractions were gained at practical conditions in which the temperature was in the range of 303-323 K and the pressure range was 90-235 bar, respectively. Moreover, four Equation of States [Soave-Redlich-Kwong, Peng-Robinson, Stryjek-Vera and Dashtizadeh-Pazuki-Taghikhani-Ghotbi (DPTG)] were compared with the experimental data. Also, the mixing rules of Van der Waals (vdW1 and vdW2) selected to correlate the solubility data of vitamin A. The outcomes indicate that each of EOSs coupled with vdW2, as a method of estimating the physicochemical and critical properties, were correlated with the solubility data of vitamin A in SC-CO2 with more accuracy, in comparison with vdW1. Among the cubic EOSs, the DPTG model with vdW2 generated the most suitable correlation with the percentage average absolute relative deviation (Average Absolute Relative Deviation%) of 6.

| S-EPMC8342434 | biostudies-literature

Modelling solubility of phenolics of mango ginger extract in supercritical carbon dioxide using equation of state and empirical models.

Project description:Solubility of phenolics of mango ginger extract in supercritical carbon dioxide was studied at 40-60 °C and 100-350 bar. Critical temperature, critical pressure and critical volume of caffeic acid, the principal component of the extract were calculated using group contribution methods and compared with the values obtained by CHEMDRAW®. Vapor pressure of caffeic acid was predicted by Reidel method. Solubility prediction in supercritical carbon dioxide was studied using two different equation of states (EOS) models and eight empirical models. Peng-Robinson EOS predicted the solubility very well with average deviation of 0.68 % from the experimental solubility. Empirical equations based on the simple error minimization using non-linear regression method which do not require complex physiochemical properties was also found suitable to predict the solubility at different extraction conditions. Jouyban et al. model showed very less deviation (2.25 %) for predicted solubility values from the experiment.

| S-EPMC4554676 | biostudies-literature

Prediction of Acid Red 138 solubility in supercritical CO2 with water co-solvent.

Project description:Acid Red 138, as a weak acid azo dye with a long alkyl chain, is widely used for protein fiber dyeing while it cannot dissolve in supercritical carbon dioxide. The objective of this study is to investigate the solubility of Acid Red 138 with water at the temperatures of 353.15, 363.15, 373.15, 393.15 and 413.15 K and over a pressure range of 20 to 26 MPa. The test results revealed that the phase equilibrium of water and Acid Red 138 was affected by the competition between pressure and density of supercritical carbon dioxide. Furthermore, the experimental solubilities were correlated by three types of density-based model. Good agreement with less than 3.36% of average absolute relative deviation between the calculated and the experimental data of water was achieved. In addition, the Chrastil model, Mendez-Santiago-Teja model and Sung-Shim model exhibited excellent correlation results for Acid Red 138 solubilities with the AARD values of 8.58%, 6.06% and 5.19%. Better understanding of the solubility behavior of Acid Red 138 in supercritical carbon dioxide displays potential for developing a microemulsion system for the eco-friendly dyeing of natural fibers.

| S-EPMC9076466 | biostudies-literature

Achieving solubility alteration with functionalized polydimethylsiloxane for improving the viscosity of supercritical CO2 fracturing fluids.

Project description:Supercritical carbon dioxide (SC-CO2) fracturing technology has the characteristics of a large amount of fixed CO2 and anhydrous fracturing. It has great application potential for developing unconventional oil and gas resources and mitigating the greenhouse effect. However, the low viscosity of SC-CO2 limits the development of this technology. In this work, HS series thickeners were prepared via a ring-opening polymerization and hydrosilylation reaction by a molecular simulation-aided design method. The simulation results of cohesive energy density, interaction energy, and radial distribution function are consistent with the visualization experimental results, which proves that HS (hyperbranched siloxane) series thickeners have excellent solubility in SC-CO2. HS-3 is the best thickener in the HS series. At 305.15 K and 10 MPa, 5 wt% HS-3 (60 s-1) increases the viscosity of SC-CO2 by 151 times, and the apparent viscosity is 3.024 mPa s. The apparent viscosity of SC-CO2 was positively correlated with the pressure and concentration but negatively correlated with the temperature and shear rate. The results indicate that it is feasible to introduce an aliphatic group and polysiloxane into a SC-CO2 thickener by hydrosilylation.

| S-EPMC9032628 | biostudies-literature

Solubility, Thermodynamic Parameters, and Dissolution Properties of 17-α Hydroxyprogesterone in 13 Pure Solvents.

Project description:The static gravimetric method was used to measure the solubility of 17-α hydroxyprogesterone (OHP) in 13 pure solvents ranging from 278.15 to 323.15 K. The results indicate that the experimental solubility of OHP increases with increasing temperature. The experimental solubility data were correlated by the selected van't Hoff model, λh model, modified Apelblat model, Yaws model, and nonrandom two-liquid (NRTL) model. The fitting results show that the Yaws model can give better correlation results by fitting 13 different pure solvent systems. Based on the NRTL equation, the thermodynamic analysis of solubility data showed that the mixing process was spontaneous. The Hansen solubility parameters (HSPs) and solvent effect were applied to explore these solubility characteristics. Finally, the thermodynamic properties ΔsolH°, ΔsolS°, ΔsolG°, %ξH, and %ξTS were calculated by the van't Hoff model equation. The results showed that ΔsolH°, ΔsolS°, and ΔsolG° are all positive values, indicating that the dissolution of OHP in the selected solvent is an endothermic reaction with increasing entropy.

| S-EPMC11007714 | biostudies-literature

Solubility of Anthraquinone Derivatives in Supercritical Carbon Dioxide: New Correlations.

Project description:Solubility of several anthraquinone derivatives in supercritical carbon dioxide was readily available in the literature, but correcting ability of the existing models was poor. Therefore, in this work, two new models have been developed for better correlation based on solid-liquid phase equilibria. The new model has five adjustable parameters correlating the solubility isotherms as a function of temperature. The accuracy of the proposed models was evaluated by correlating 25 binary systems. The proposed models observed provide the best overall correlations. The overall deviation between the experimental and the correlated results was less than 11.46% in averaged absolute relative deviation (AARD). Moreover, exiting solubility models were also evaluated for all the compounds for the comparison purpose.

| S-EPMC7831049 | biostudies-literature

Thermodynamic Assessment of the Partitioning of Acetone between Supercritical CO2 and Polystyrene Using the Polar PC-SAFT Equation of State.

Project description:Supercritical carbon dioxide (scCO2) has gained considerable attention in the process industry due to its favorable economic, environmental, and technical characteristics. Polymer processing is one of the key industrial applications where scCO2 plays an important role. In order to be able to efficiently design the polymer processing equipment, understanding the phase behavior and partition of solutes between scCO2 and polymers is necessary. This paper investigates the partitioning of acetone - a conventional polar cosolvent - between scCO2 and polystyrene - a glassy polymer. We highlight the importance of taking into account the polar interactions between acetone molecules and their role in the polymer phase behavior. The system is modeled under a wide range of temperatures and pressures (278.15-518.2 K and 1.0-20.0 MPa) using the polar version of the perturbed chain statistical associating fluid theory (polar PC-SAFT) equation of state. The results show that at relatively low pressure, the system exhibits a vapor-liquid-liquid (VLL) three-phase region bounded by two two-phase regions (VL and LL). At high pressure, VLL and VL regions disappear and only the LL region remains. The temperature effect is more interesting, showing a transition of upper critical solution temperature behavior to lower critical solution temperature behavior at 10 MPa and 398.15 K. It is found that neglecting the polar term can lead to significant changes in the description of the polymeric-system phase behavior especially at lower temperatures. No such differences are observed at higher temperatures (above 500 K) where the effect of polar interaction is considerably weaker.

| S-EPMC7676333 | biostudies-literature

A machine learning approach for thermodynamic modeling of the statically measured solubility of nilotinib hydrochloride monohydrate (anti-cancer drug) in supercritical CO2.

Project description:Nilotinib hydrochloride monohydrate (NHM) is an anti-cancer drug whose solubility was statically determined in supercritical carbon dioxide (SC-CO2) for the first time at various temperatures (308-338 K) and pressures (120-270 bar). The mole fraction of the drug dissolved in SC-CO2 ranged from 0.1 × 10-5 to 0.59 × 10-5, corresponding to the solubility range of 0.016-0.094 g/L. Four sets of models were employed to evaluate the correlation of experimental data; (1) ten empirical and semi-empirical models with three to six adjustable parameters, such as Chrastil, Bartle, Sparks, Sodeifian, Mendez-Santiago and Teja (MST), Bian, Jouyban, Garlapati-Madras, Gordillo, and Jafari-Nejad; (2) Peng-Robinson equation of state (Van der Waals mixing rule, had an AARD% of 10.73); (3) expanded liquid theory (modified Wilson model, on average, the AARD of this model was 11.28%); and (4) machine learning (ML) algorithms (random forest, decision trees, multilayer perceptron, and deep neural network with respective R2 values of 0.9933, 0.9799, 0.9724 and 0.9701). All the models showed an acceptable agreement with the experimental data, among them, the Bian model exhibited excellent performance with an AARD% of 8.11. Finally, the vaporization (73.49 kJ/mol) and solvation (- 21.14 kJ/mol) enthalpies were also calculated for the first time.

| S-EPMC10412577 | biostudies-literature

Activation of Sirtuin 2 Inhibitors Employing Photoswitchable Geometry and Aqueous Solubility.

Project description:Because isoenzymes of the experimentally and therapeutically extremely relevant sirtuin family show high similarity, addressing the unique selectivity pocket of sirtuin 2 is a promising strategy towards selective inhibitors. An unrelated approach towards selective inhibition of isoenzymes with varied tissue distribution is targeted drug delivery or spatiotemporal activation by photochemical activation. Azologization of two nicotinamide-mimicking lead structures was undertaken to combine both approaches and yielded a set of 33 azobenzenes and azopyridines that have been evaluated for their photochemical behaviour and bioactivity. For some compounds, inhibitory activity reached the sub-micromolar range in their thermodynamically favoured E form and could be decreased by photoisomerization to the metastable Z form. Besides, derivatization with long-chain fatty acids yielded potent sirtuin 2 inhibitors, featuring another intriguing aspect of azo-based photoswitches. In these compounds, switching to the Z isomer increased aqueous solubility and thereby enhanced biological activity by up to a factor of 21. The biological activity of two compounds was confirmed by hyperacetylation of sirtuin specific histone proteins in a cell-based activity assay.

| S-EPMC7496931 | biostudies-literature

Solubility Measurement and Various Solubility Parameters of Glipizide in Different Neat Solvents.

Project description:Glipizide (GLZ) is an oral hypoglycemic agent, which is a weakly aqueous soluble drug. The solubility values of GLZ in various neat solvents are scarce in the literature. Hence, the solubility of GLZ in 12 different neat solvents, namely, "water, methanol, ethanol, isopropanol (IPA), 1-butanol, 2-butanol, ethylene glycol (EG), propylene glycol (PG), poly(ethylene glycol)-400 (PEG-400), ethyl acetate (EA), dimethyl sulfoxide (DMSO), and Transcutol-HP (THP)", at "T = 298.2-318.2 K" and "p = 0.1 MPa" was measured. The recorded solubilities of GLZ were correlated by "van't Hoff and Apelblat models" using root-mean-square deviation (RMSD). The overall RMSD was obtained as 1.21 and 1.40% for "Apelblat and van't Hoff models", respectively. Different solubility parameters of all studied materials including drug and solvent were calculated to find the best solvent for GLZ. The solubilities of GLZ (expressed in mole fraction) have been found highest in DMSO (2.81 × 10-2), followed by THP, EA, 2-butanol, 1-butanol, IPA, PEG-400, ethanol, PG, methanol, EG, and water (1.98 × 10-4) at "T = 318.2 K". All investigated solubility parameters of GLZ were recorded very close to the DMSO. "Apparent thermodynamic analysis" showed an "endothermic and entropy-driven dissolution" of GLZ in the 12 different neat solvents. The highest molecular interactions were recorded in GLZ-DMSO compared to other combinations. Overall, DMSO has been considered as the best solvent for the solubilization of GLZ.

| S-EPMC6990636 | biostudies-literature