Metabolomics,Unknown,Transcriptomics,Genomics,Proteomics

Dataset Information

Differential gene expression profile of y79 retinoblastoma cells in response to stress conditions

ABSTRACT: The Y79 retinoblastoma cells were exposed to oxidative stress conditions with hydrogen peroxide exposure. The differential gene expression profile on this condition was evaluated by comparing with untreated control Y79 cells. The cellular responses based on the differential gene expression was studied. One-color experiment,Organism: Human , Custom Whole Genome Human 8x60k designed by Genotypic Technology Pvt. Ltd. (Agilent-27114), Labeling kit: Agilent Quick-Amp labeling Kit (p/n5190-0442)

ORGANISM(S): Homo sapiens

SUBMITTER: Genotypic technology

PROVIDER: E-GEOD-27880 | biostudies-arrayexpress |

REPOSITORIES: biostudies-arrayexpress

ACCESS DATA

Publications

Microarray analysis and biochemical correlations of oxidative stress responsive genes in retinoblastoma.

Vandhana Suryanarayanan S Lakshmi Thiagavathi Selvaraj Ramyaa TS Indra Dharmu D Deepa Perinkulam Ravi PR Krishnakumar Subramanian S

Current eye research 20120605 9

<h4>Purpose</h4>Oxidative stress, which refers to the biological damage caused by free radicals produced in excess of innate antioxidant defenses, is indicated in the ocular cancer retinoblastoma (RB). Here we have analysed the differential expression of oxidative stress responsive genes in oxidant-induced RB cells, and in RB tumor tissues.<h4>Methods</h4>The study included cultured RB cells, and four RB tumor tissues. The reactive oxygen species (ROS) levels in Y79 cells and the RB tumor induce ...[more]

PMID: 22668346

Similar Datasets

Project description:Gene expression analysis study in cerulenin treated - 7Âµg/ml cerulenin treated Y79 cells and control Y79 cells Organism used: Homo sapiens ï Slides: Gene Expression Whole Human Genome 4x44k ï Starting material: Cells in RNA later ï RNA Samples used: :Control Y79 and Treated_Cerulenin ï Labeling kit: Agilents Low input RNA linear amplification Kit one color ï Labeling Method: T7 promoter based-linear amplification to generate labeled complementary RNA ï Total RNA and cRNA Purification Kit: Qiagenâs RNeasy minikit ï Hybridization Kit: Agilentâs In situ Hybridzation kit Hybridization protocol The fragmented cRNA were mixed with 25ul of 2x GE Hybridization Buffer (Agilent). About 45ul of the resulting mixture was applied to the Microarray and hybridized at 65degC for 17 hours in an Agilent Microarray Hybridization Chamber (SureHyb: G2534A) with Hybridization Oven. After hybridization, slides were washed with Agilent Gene expression Wash Buffer I for 1 minute at room temperature followed by a 1 min wash with Agilent Gene expression Wash Buffer II for 37C. Slides were finally rinsed with Acetonitrile for cleaning up and drying. Scan protocol Laser detection of Cyanine 3 and Cyanine 5 fluorescence is performed using a confocal scanning instrument containing two tuned lasers, which excite Cyanine dyes at the appropriate wavelengths. Description Microarrays were scanned on an Agilent scanner (G2565AA) at 100% laser power, 30% PMT.Data extraction was carried out with Agilent Feature Extraction software (version 9.1), and normalization was done using linear per array algorithm according to the manufacturerâs protocol. Data processing Feature extracted data was analyzed using GeneSpring GX v 7.3.1 software from Agilent. Normalization of the data was done in GeneSpring GX using the recommended one color Per Chip and Per Gene Data Transformation: Set measurements less than 0.01 to 0.01, Per Chip: Normalize to 50th percentile, Per Gene: Normalize to Specific Samples. Further quality control of normalized data was done using correlation based condition tree to eliminate bad experiments. Differentially regulated Genes were filtered with cutoff of > 1.5 for Up regulation and < 0.55 for Down Regulation were obtained. Differentially regulated genes were clustered using gene tree to identify significant gene expression patterns.

Project description:Gene expression analysis study in curcumin treated (20ÂµM curcumin treated Y79 cells ) and control Y79 cells (Suspension Y79 cells). Source were Y79 retinoblastoma cell line from human. Organism used: Homo sapiens ï Slides: Gene Expression Whole Human Genome 4x44k ï Starting material: Cells in RNA later ï RNA Samples used: :Control Y79 and Treated_Curcumin ï Labeling kit: Agilents Low input RNA linear amplification Kit one color Labeling Method: T7 promoter based-linear amplification to generate labeled complementary RNA ï Total RNA and cRNA Purification Kit: Qiagenâs RNeasy minikit ï Hybridization Kit: Agilentâs In situ Hybridzation kit Hybridization protocol The fragmented cRNA were mixed with 25ul of 2x GE Hybridization Buffer (Agilent). About 45ul of the resulting mixture was applied to the Microarray and hybridized at 65degC for 17 hours in an Agilent Microarray Hybridization Chamber (SureHyb: G2534A) with Hybridization Oven. After hybridization, slides were washed with Agilent Gene expression Wash Buffer I for 1 minute at room temperature followed by a 1 min wash with Agilent Gene expression Wash Buffer II for 37C. Slides were finally rinsed with Acetonitrile for cleaning up and drying. Scan protocol Laser detection of Cyanine 3 and Cyanine 5 fluorescence is performed using a confocal scanning instrument containing two tuned lasers, which excite Cyanine dyes at the appropriate wavelengths. Description Microarrays were scanned on an Agilent scanner (G2565AA) at 100% laser power, 30% PMT.Data extraction was carried out with Agilent Feature Extraction software (version 9.1), and normalization was done using linear per array algorithm according to the manufacturerâs protocol. Data processing Feature extracted data was analyzed using GeneSpring GX v 7.3.1 software from Agilent. Normalization of the data was done in GeneSpring GX using the recommended one color Per Chip and Per Gene Data Transformation: Set measurements less than 0.01 to 0.01, Per Chip: Normalize to 50th percentile, Per Gene: Normalize to Specific Samples. Further quality control of normalized data was done using correlation based condition tree to eliminate bad experiments. Differentially regulated Genes were filtered with cutoff of > 1.5 for Up regulation and < 0.55 for Down Regulation were obtained. Differentially regulated genes were clustered using gene tree to identify significant gene expression patterns.

Project description:Retinoblastoma Y79 cell line was treated with scopoletin in vitro and RNA was isolated for microarray experiment to study the changes in the whole gene expression profiling in the Y79 cell line. The study identified 1675 up-regulated genes (>1.0 fold) and 1879 down-regulated genes (<-1 fold) in response to scopoletin treatment Slides:Whole genome Human 4x44k array ï Starting material: Cells in RNA Later ï RNA Samples used: Y79_c_Noni Extract,Control ï Labeling kit: Agilentâs Quick-Amp labeling Kit ï Labeling Method: T7 promoter based-linear amplification to generate labeled complementary RNA ï Total RNA and cRNA Purification Kit: Qiagenâs RNeasy minikit Cat ï Hybridization Kit: Agilentâs In situ Hybridzation kit Hybridization protocol The fragmented cRNA were mixed with 25ul of 2x GE Hybridization Buffer (Agilent). About 45ul of the resulting mixture was applied to the Microarray and hybridized at 65degC for 17 hours in an Agilent Microarray Hybridization Chamber (SureHyb: G2534A) with Hybridization Oven. After hybridization, slides were washed with Agilent Gene expression Wash Buffer I for 1 minute at room temperature followed by a 1 min wash with Agilent Gene expression Wash Buffer II for 37C. Slides were finally rinsed with Acetonitrile for cleaning up and drying. Scan protocol Laser detection of Cyanine 3 and Cyanine 5 fluorescence is performed using a confocal scanning instrument containing two tuned lasers, which excite Cyanine dyes at the appropriate wavelengths. Description Microarrays were scanned on an Agilent scanner (G2565AA) at 100% laser power, 30% PMT.Data extraction was carried out with Agilent Feature Extraction software (version 9.1), and normalization was done using linear per array algorithm according to the manufacturerâs protocol. Data processing Feature extracted data was analyzed using GeneSpring GX v 7.3.1 software from Agilent. Normalization of the data was done in GeneSpring GX using the recommended one color Per Chip and Per Gene Data Transformation: Set measurements less than 0.01 to 0.01, Per Chip: Normalize to 50th percentile, Per Gene: Normalize to Specific Samples. Further quality control of normalized data was done using correlation based condition tree to eliminate bad experiments. Differentially regulated Genes were filtered with cutoff of > 1.5 for Up regulation and < 0.55 for Down Regulation were obtained. Differentially regulated genes were clustered using gene tree to identify significant gene expression patterns.

Project description:Retinoblastoma Y79 cell line was treated with specific siRNA to silence EpCAM gene expression in vitro and RNA was isolated for microarray experiment to study the changes in the whole gene expression profiling in the Y79 cell line. The study identified 465 up-regulated genes (>1.0 fold) and 205 down-regulated genes (<0.5 fold) in response to knockdown of Ep-CAM. Organism used: Homo Sapiens ï Slides: Whole genome Human 4x44k array ï Starting material: Cells in RNA Later ï RNA Samples used: Control, siRNA1 ï Labeling kit: Agilent Low Input RNA Linear amplification kit ï Labeling Method: T7 promoter based-linear amplification to generate labelled complementary RNA ï Total RNA and cRNA Purification Kit: Qiagenâs RNeasy minikit ï Hybridization Kit: Agilent Insitu Hybridization Kit Hybridization protocol The fragmented cRNA were mixed with 25ul of 2x GE Hybridization Buffer (Agilent). About 45ul of the resulting mixture was applied to the Microarray and hybridized at 65degC for 17 hours in an Agilent Microarray Hybridization Chamber (SureHyb: G2534A) with Hybridization Oven. After hybridization, slides were washed with Agilent Gene expression Wash Buffer I for 1 minute at room temperature followed by a 1 min wash with Agilent Gene expression Wash Buffer II for 37C. Slides were finally rinsed with Acetonitrile for cleaning up and drying. Scan protocol Laser detection of Cyanine 3 and Cyanine 5 fluorescence is performed using a confocal scanning instrument containing two tuned lasers, which excite Cyanine dyes at the appropriate wavelengths. Description Microarrays were scanned on an Agilent scanner (G2565AA) at 100% laser power, 30% PMT.Data extraction was carried out with Agilent Feature Extraction software (version 9.1), and normalization was done using linear per array algorithm according to the manufacturerâs protocol. Data processing Feature extracted data was analyzed using GeneSpring GX v 7.3.1 software from Agilent. Normalization of the data was done in GeneSpring GX using the recommended one color Per Chip and Per Gene Data Transformation: Set measurements less than 0.01 to 0.01, Per Chip: Normalize to 50th percentile, Per Gene: Normalize to Specific Samples. Further quality control of normalized data was done using correlation based condition tree to eliminate bad experiments. Differentially regulated Genes were filtered with cutoff of > 1.5 for Up regulation and < 0.55 for Down Regulation were obtained. Differentially regulated genes were clustered using gene tree to identify significant gene expression patterns.

Dataset Information

Differential gene expression profile of y79 retinoblastoma cells in response to stress conditions

Publications

Microarray analysis and biochemical correlations of oxidative stress responsive genes in retinoblastoma.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure