Project description:Batch cultures of Wild-type C. jejuni NCTC11168 were grown in 150 ml volumes of Mueller-Hinton broth in 250 ml baffled flasks. Microaerophilic conditions were generated using a MACS-VA500 microaerophilic work station (10 % O2, 10 % CO2, 80 % N2) from Don Whitley Scientific, Ltd which also maintained the growth temperature at 42 ÂºC. When mid-exponential phase was reached 0.25 mM GSNO was added to half of the cultures. After a 10 minute exposure samples of both treated and untreated cells were harvested into phenol/ethenol to stabilize the RNA and total RNA was purified using Qiagenâs RNeasy Mini kit (as recommended by the suppliers) prior to use in microarray analysis. A C. jejuni cgb mutant was grown in two parallel custom-built chemostats based on Sigma Proculture Dynalift spinner flasks with a working volume of 125 ml, and the dilution rate (which at steady state is equal to the specific growth rate) of 0.1 h-1. A gas mix of 10% O2, 10% CO2 and 80% N2 was passed into the head space of the culture vessel at a rate of 0.25 l min-1 to obtain a microaerobic atmosphere, and silicone water jackets maintained the temperature at 42 ÂºC. The flasks were placed on KMO 2 basic IKA-Werke stirrers (arbitrary setting, 260; Scientific Laboratory Supplies), which gaveeffective transfer of O2 from the gaseous atmosphere to the culture by virtue of a stable vortex. A fresh overflow sample was used to check the pH at the time of harvest (which was consistently between 6.6 and 7) and to ensure that there was no contamination by plating a 20 Î¼l sample onto both nutrient agar plates incubated at 37 Â°C at atmospheric oxygen, and Mueller-Hinton plates incubated at 42 Â°C in the microaerophilic work station. When staedy-state was reached, as verified by collecting at least 5 culture volumes, GSNO (final concentration 0.25 mM) was added to one culture. After a further 10 min the 125 ml volume was separated into 3 equal volumes and each was mixed immediately on ice with 3.56 ml 100% ethanol and 185 ml phenol to stabilize the RNA. The cells were subsequently harvested by centrifugation. Total RNA was purified by using a Qiagen RNeasy Mini kit as recommended by the supplier. cDNA synthesis was carried out using 12 Âµg of starting material, which was primed with 9 Âµg of pd(N)6 random hexamers (Amersham Biosciences). Reaction mixtures (20 Âµl) containing 0.5 mM ATP, 0.5 mM TTP, 0.5 mM GTP, 0.2 mM CTP, and 1 mM Cy3- or 1 mM Cy5-dCTP were incubated for 2 h at 42 Â°C with 200 U of Superscript II RNase H reverse transcriptase (Invitrogen). Following synthesis, cDNA was purified by using a PCR purification kit (Qiagen) to remove the unincorporated deoxynucloside triphosphates, fluorescent dye, and primers. Equal volumes of cDNA were combined and evaporated to near dryness with an SPD121P Speed Vac (Thermon Savant). For hybridisation to the microarray slides, cDNA was resuspended in an appropriate volume of salt-based hybridization buffer (provided by Ocimum Biosolutions). Prior to addition to the slides, cDNA samples were heated to 95 Â°C for 3 min, and then placed on ice for no more than 3 min. The slides were placed in MWG Biotech hybridization chambers and incubated for 16 to 24 h in a shaking water bath at 110 rpm and 42 Â°C. Following incubation , the slides were washed sequentially for 5 min in 2x SSC-1 % sodium dodecyl sulphate, 1x SSC, 0.5x SSC and 0.1x SSC at 37 Â°C with gentle agitation (1x SSC is 0.15 M NaCl plus 0.015 M sodium citrate). The slides were dried by centrifugation at 254 xg for 5 min and subsequently scanned with an Affymetrix 428 scanner. The average signal intensity and local background correction were obtained by using commercially available software from Biodiscovery, Inc. (Imagine version 4.0, and Genesight, version 3.5). The mean values from each channel were log2 transformed and normalized by using the subtract-by-mean method to remove intensity-dependent effects in the log2 (ratio) values. The Cy3/Cy5 fluorescence ratios were calculated from the normalized values. Biological experiments (i.e. chemostat growth with and without 0.25 mM GSNO addition) were carried out three times and a dye swap was performed for two of the three experiments which provided two technical repeats, one each for two of the three biological repeats. Data from the independent experiments were combined. Genes that were differentially expressed â¥ twofold and displayed and P value of â¤ 0.05 (as determined by a t test) were defined as being statistically significantly differentially transcribed.

Project description:Wild-type Campylobacter jejuni NCTC11168 was grown in 2 homemade, parallel chemostats. Cells were grown in 125 ml volumes of Mueller-Hinton Broth where the growth rate was controlled by the dilution rate (0.1 h-1). A gas mix of 80% nitrogen, 10% carbon dioxide and 10% oxygen was pumped into the head-space of the vessels at a rate of 0.25 l/min to obtain a microaerobic environment and the culture was maintained at 42 ÂºC via a water jacket. Cells were grown as above until steady-state had been reached. At steady-state one of the cultures was exposed to 10 uM NOC-5 & -7 (final concentration) for a period of 10 min. Samples of both the control and stressed cultures were harvested into phenol/ethanol to stabilize the RNA and total RNA was purified using Qiagenâ??s RNeasy Mini kit (as recommended by the suppliers) prior to use in microarray analysis. Equal quantities of RNA from control and GSNO-supplemented cultures were labelled using nucleotide analogues of dCTP containing either Cy3 or Cy5 fluorescent dyes. The average signal intensity and local background correction were obtained using a commercially available software package from Biodiscovery, Inc (Imagene, version 4.0 and GeneSight, version 4). The mean values from each channel were log2 transformed and normalised using the Lowess method to remove intensity-dependent effects in the log2(ratios) values. The Cy3/Cy5 fluorescent ratios were calculated from the normalized values. C. jejuni NCTC11168 was grown in two parallel custom-built chemostats based on Sigma Proculture Dynalift spinner flasks with a working volume of 125 ml, and the dilution rate (which at steady state is equal to the specific growth rate) of 0.1 h-1. A gas mix of 10% O2, 10% CO2 and 80% N2 was passed into the head space of the culture vessel at a rate of 0.25 l min-1 to obtain a microaerobic atmosphere, and silicone water jackets maintained the temperature at 42 ÂºC. The flasks were placed on KMO 2 basic IKA-Werke stirrers (arbitrary setting, 260; Scientific Laboratory Supplies), which gaveeffective transfer of O2 from the gaseous atmosphere to the culture by virtue of a stable vortex. A fresh overflow sample was used to check the pH at the time of harvest (which was consistently between 6.6 and 7) and to ensure that there was no contamination by plating a 20 Î¼l sample onto both nutrient agar plates incubated at 37 Â°C at atmospheric oxygen, and Mueller-Hinton plates incubated at 42 Â°C in the microaerophilic work station. When staedy-state was reached, as verified by collecting at least 5 culture volumes, NOC-5 & -7 (final concentration 10 uM) was added to one culture. After a further 10 min the 125 ml volume was separated into 3 equal volumes and each was mixed immediately on ice with 3.56 ml 100% ethanol and 185 ml phenol to stabilize the RNA. The cells were subsequently harvested by centrifugation. Total RNA was purified by using a Qiagen RNeasy Mini kit as recommended by the supplier. cDNA synthesis was carried out using 12 Âµg of starting material, which was primed with 9 Âµg of pd(N)6 random hexamers (Amersham Biosciences). Reaction mixtures (20 Âµl) containing 0.5 mM ATP, 0.5 mM TTP, 0.5 mM GTP, 0.2 mM CTP, and 1 mM Cy3- or 1 mM Cy5-dCTP were incubated for 2 h at 42 Â°C with 200 U of Superscript II RNase H reverse transcriptase (Invitrogen). Following synthesis, cDNA was purified by using a PCR purification kit (Qiagen) to remove the unincorporated deoxynucloside triphosphates, fluorescent dye, and primers. Equal volumes of cDNA were combined and evaporated to near dryness with an SPD121P Speed Vac (Thermon Savant). For hybridisation to the microarray slides, cDNA was resuspended in an appropriate volume of salt-based hybridization buffer (provided by Ocimum Biosolutions). Prior to addition to the slides, cDNA samples were heated to 95 Â°C for 3 min, and then placed on ice for no more than 3 min. The slides were placed in MWG Biotech hybridization chambers and incubated for 16 to 24 h in a shaking water bath at 110 rpm and 42 Â°C. Following incubation , the slides were washed sequentially for 5 min in 2x SSC-1 % sodium dodecyl sulphate, 1x SSC, 0.5x SSC and 0.1x SSC at 37 Â°C with gentle agitation (1x SSC is 0.15 M NaCl plus 0.015 M sodium citrate). The slides were dried by centrifugation at 254 xg for 5 min and subsequently scanned with an Affymetrix 428 scanner. The average signal intensity and local background correction were obtained by using commercially available software from Biodiscovery, Inc. (Imagine version 4.0, and Genesight, version 3.5). The mean values from each channel were log2 transformed and normalized by using the subtract-by-mean method to remove intensity-dependent effects in the log2 (ratio) values. The Cy3/Cy5 fluorescence ratios were calculated from the normalized values. Biological experiments (i.e. chemostat growth with and without 0.25 mM GSNO addition) were carried out three times and a dye swap was performed for two of the three experiments which provided two technical repeats, one each for two of the three biological repeats. Data from the independent experiments were combined. Genes that were differentially expressed â?¥ twofold and displayed and P value of â?¤ 0.05 (as determined by a t test) were defined as being statistically significantly differentially transcribed.

Project description:Escherichia coli strain MG1655 was grown to mid-log phase in defined aerobic media. One sample was treated with 30 ÂµM CORM-3, the other sample was a control. The volume (30 ml), temperature (37oC) and shaking (200 rpm) were constant. After 15 min of exposure to CO-RM, samples were taken from treated and control cells, harvested into ice cold phenol ethanol (187 Âµl phenol, 3.56 ml ethanol) to stabilize RNA, and total RNA was purified using Qiagenâs RNeasy Mini kit as recommended by suppliers. RNA was quantified using a BioPhotometer (Eppendorf). Biological experiments were carried out four times, and a dye swap performed for each experiment, providing two technical repeats for each of the four biological repeats. Cells were grown in defined minimal medium (aerobic). Final concentrations are: glycerol (54 mM), K2HPO4 (23 mM), KH2HPO4 (7.3 mM), NH4Cl (18.7 mM), CaCl2 (69 ÂµM), and K2SO4 (15 mM). Trace elements were added at 10 ml per l; final concentrations are: 134 ÂµM EDTA, 31 ÂµM FeCl3, 6.15 ÂµM ZnO, CuCl2 0.57 ÂµM, CoNo3 0.34 ÂµM, 1.6 ÂµM H3BO3, 1 ÂµM ammonium molybdenate and 1 ÂµM sodium selenite. MgCl2 was added at 1 ml per l. All chemicals were of AnalaR grade of purity or higher. E. coli strain MG1655 was grown in 250 ml side arm flasks in 30 ml of the above defined minimal media (aerobic). CORM-3 was added at a final concentration of 30 ÂµM, chosen because it causes only a slight reduction in the growth rate. Cells were grown to mid-log (Klett values of 30-40) before addition of CO-RM. The total 30 ml volume was harvested into ice cold phenol ethanol (187 Âµl phenol, 3.56 ml ethanol) to stabilize RNA, and total RNA was purified using Qiagenâs RNeasy Mini kit as recommended by suppliers. RNA was quantified using a BioPhotometer (Eppendorf). Biological experiments were carried out four times, and a dye swap performed for each experiment, providing two technical repeats for each of the four biological repeats. Equal quantities of RNA from control and CO-RM-treated cells were labelled by using nucleotide analogues of dCTP containing either Cy3 or Cy5 fluorescent dyes (Perkin Elmer). For each microarray slide, one sample was labelled with Cy3-dCTP, while the other sample was labelled with Cy5-dCTP. RNA (approximately 9 micrograms) was annealed to 4.5 micrograms pd(N)6 random hexamers (Amersham Biosciences) by heating at 65 oC for 10 min, followed by 10 min at 22 oC and cooling on ice for 2 min. This was supplemented with 6 microlitres of 5Ã First-strand buffer (Invitrogen), 2.5 microlitres dNTP mixture (5 mM each dATP, dTTP, dGTP and 2 mM dCTP), 3 microlitres 0.1 M DTT, 2 microlitres 1 mM Cy3 or Cy5 (Perkin Elmer) and 1.5 microlitre Superscript III reverse transcriptase (200 U) (Invitrogen). This was incubated at 42 oC for 3 hours. The reaction was terminated by the addition of NaOH (7.5 microlitres of 1M) and HCl (7.5 microlitres of 1M) before the addition of TE buffer (300 microlitres). Labelled cDNA was purified using a Qiaquick PCR purification kit (Qiagen). The Cy3-dCTP-labelled sample was mixed with the Cy5-dCTP-labelled sample, vacuum dried and re-suspended in 120 microlitres salt-based hybridisation buffer (supplied with the microarray slides). This was heated at 95 oC for 3 min then cooled on ice for 3 min. The mixture was pipetted onto a microarray slide, sealed with a GeneFrame and coverslip in a hybridization chamber and incubated for 18 h at 42 Â°C. Following hybridization, microarray slides (minus GeneFrame and coverslip) were washed in a series of pre-warmed (37 Â°C) SSC buffers for 5 min each at 37oC: 2Ã SSC/0.1 % SDS, 1Ã SSC, 0.2Ã SSC and 0.01Ã SSC. Microarray slides were dried by centrifugation at 1500 Ã g for 2 min before scanning. Slides were scanned on an Affymetrix 428 scanner. The average signal intensity and local background correction were obtained using a commercially available software package from Biodiscovery, Inc (Imagene, version 4.0 and GeneSight, version 3.5). Spots automatically flagged as bad, negative or poor in the Imagene software were removed before the statistical analysis was carried out in GeneSight. The mean values from each channel were log2 transformed and normalised using the Lowess method to remove intensity-dependent effects in the log2(ratios) values. The Cy3/Cy5 fluorescent ratios were calculated from the normalized values. Biological experiments (i.e. a comparison of control and plus CO-RM cells) were carried out four times, and a dye swap performed for each experiment, providing two technical repeats for each of the four biological repeats. Data from the independent experiments were combined. Genes that were differentially expressed â¥ twofold and displayed and P value of < 0.05 (as determined by a t test) were defined as being statistically significantly differentially transcribed.

Project description:A single-domain globin (cgb) mutant strain of Campylobacter jejuni NCTC11168 was grown in 2 homemade, parallel chemostats. Cells were grown in 125 ml volumes of Mueller-Hinton Broth where the growth rate was controlled by the dilution rate (0.1 h-1). A gas mix of 80% nitrogen, 10% carbon dioxide and 10% oxygen was pumped into the head-space of the vessels at a rate of 0.25 l/min to obtain a microaerobic environment and the culture was maintained at 42 ºC via a water jacket. Cells were grown as above until steady-state had been reached. At steady-state one of the cultures was exposed to 10 uM NOC-5 & -7 (final concentration) for a period of 10 min. Samples of both the control and stressed cultures were harvested into phenol/ethanol to stabilize the RNA and total RNA was purified using Qiagen’s RNeasy Mini kit (as recommended by the suppliers) prior to use in microarray analysis. Equal quantities of RNA from control and GSNO-supplemented cultures were labelled using nucleotide analogues of dCTP containing either Cy3 or Cy5 fluorescent dyes. The average signal intensity and local background correction were obtained using a commercially available software package from Biodiscovery, Inc (Imagene, version 4.0 and GeneSight, version 4). The mean values from each channel were log2 transformed and normalised using the Lowess method to remove intensity-dependent effects in the log2(ratios) values. The Cy3/Cy5 fluorescent ratios were calculated from the normalized values. Keywords: Stress-response of a cgb mutant to NO A C. jejuni NCTC11168 cgb mutant was grown in two parallel custom-built chemostats based on Sigma Proculture Dynalift spinner flasks with a working volume of 125 ml, and the dilution rate (which at steady state is equal to the specific growth rate) of 0.1 h-1. A gas mix of 10% O2, 10% CO2 and 80% N2 was passed into the head space of the culture vessel at a rate of 0.25 l min-1 to obtain a microaerobic atmosphere, and silicone water jackets maintained the temperature at 42 ºC. The flasks were placed on KMO 2 basic IKA-Werke stirrers (arbitrary setting, 260; Scientific Laboratory Supplies), which gaveeffective transfer of O2 from the gaseous atmosphere to the culture by virtue of a stable vortex. A fresh overflow sample was used to check the pH at the time of harvest (which was consistently between 6.6 and 7) and to ensure that there was no contamination by plating a 20 μl sample onto both nutrient agar plates incubated at 37 °C at atmospheric oxygen, and Mueller-Hinton plates incubated at 42 °C in the microaerophilic work station. When staedy-state was reached, as verified by collecting at least 5 culture volumes, NOC-5 & -7 (final concentration 10 uM) was added to one culture. After a further 10 min the 125 ml volume was separated into 3 equal volumes and each was mixed immediately on ice with 3.56 ml 100% ethanol and 185 ml phenol to stabilize the RNA. The cells were subsequently harvested by centrifugation. Total RNA was purified by using a Qiagen RNeasy Mini kit as recommended by the supplier. cDNA synthesis was carried out using 12 µg of starting material, which was primed with 9 µg of pd(N)6 random hexamers (Amersham Biosciences). Reaction mixtures (20 µl) containing 0.5 mM ATP, 0.5 mM TTP, 0.5 mM GTP, 0.2 mM CTP, and 1 mM Cy3- or 1 mM Cy5-dCTP were incubated for 2 h at 42 °C with 200 U of Superscript II RNase H reverse transcriptase (Invitrogen). Following synthesis, cDNA was purified by using a PCR purification kit (Qiagen) to remove the unincorporated deoxynucloside triphosphates, fluorescent dye, and primers. Equal volumes of cDNA were combined and evaporated to near dryness with an SPD121P Speed Vac (Thermon Savant). For hybridisation to the microarray slides, cDNA was resuspended in an appropriate volume of salt-based hybridization buffer (provided by Ocimum Biosolutions). Prior to addition to the slides, cDNA samples were heated to 95 °C for 3 min, and then placed on ice for no more than 3 min. The slides were placed in MWG Biotech hybridization chambers and incubated for 16 to 24 h in a shaking water bath at 110 rpm and 42 °C. Following incubation , the slides were washed sequentially for 5 min in 2x SSC-1 % sodium dodecyl sulphate, 1x SSC, 0.5x SSC and 0.1x SSC at 37 °C with gentle agitation (1x SSC is 0.15 M NaCl plus 0.015 M sodium citrate). The slides were dried by centrifugation at 254 xg for 5 min and subsequently scanned with an Affymetrix 428 scanner. The average signal intensity and local background correction were obtained by using commercially available software from Biodiscovery, Inc. (Imagine version 4.0, and Genesight, version 3.5). The mean values from each channel were log2 transformed and normalized by using the subtract-by-mean method to remove intensity-dependent effects in the log2 (ratio) values. The Cy3/Cy5 fluorescence ratios were calculated from the normalized values. Biological experiments (i.e. chemostat growth with and without 0.25 mM GSNO addition) were carried out three times and a dye swap was performed for two of the three experiments which provided two technical repeats, one each for two of the three biological repeats. Data from the independent experiments were combined. Genes that were differentially expressed ≥ twofold and displayed and P value of ≤ 0.05 (as determined by a t test) were defined as being statistically significantly differentially transcribed

Dataset Information

Global responses of a C. jejuni single domain globin mutant and wild type to nitric oxide releasing compounds

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure