RNA-SEQ assay for wild type and CRISPR induced endoglin knockout human pulmonary artery smooth muscle cells (PASMC)
Ontology highlight
ABSTRACT:
ORGANISM(S): Homo sapiens
SUBMITTER: Hongyu Tian
PROVIDER: E-GEOD-78271 | biostudies-arrayexpress |
REPOSITORIES: biostudies-arrayexpress
Similar Datasets
Project description:Purpose: to study the transcriptional changes that are induced by activating NR2F1 using an agonist (C26) that we developed. Methods: T-HEp3-GFP cells were pretreated with DMSO or 0.5 µM C26 for 6 days then inoculated on CAM and treated every 24 hours. After 7 days, tumors were collected and dissociated into single cells. FACS was used to isolate T-Hep3 tumor cells using GFP. RNA was extracted from fresh frozen cell pellets using Qiagen RNeasy Plus Universal mini kit following manufacturer’s instructions (Qiagen, Hilden, Germany). RNA samples received were quantified using Qubit 2.0 Fluorometer (Life Technologies, Carlsbad, CA, USA) and RNA integrity was checked using Agilent TapeStation 4200 (Agilent Technologies, Palo Alto, CA, USA). RNA sequencing libraries were prepared using the NEBNext Ultra RNA Library Prep Kit for Illumina following manufacturer’s instructions (NEB, Ipswich, MA, USA). Briefly, mRNAs were first enriched with Oligo(dT) beads. Enriched mRNAs were fragmented for 15 minutes at 94°C. First strand and second strand cDNAs were subsequently synthesized. cDNA fragments were end repaired and adenylated at 3’ ends, and universal adapters were ligated to cDNA fragments, followed by index addition and library enrichment by limited-cycle PCR. The sequencing libraries were validated on the Agilent TapeStation (Agilent Technologies, Palo Alto, CA, USA), and quantified by using Qubit 2.0 Fluorometer (Invitrogen, Carlsbad, CA) as well as by quantitative PCR (KAPA Biosystems, Wilmington, MA, USA). The sequencing libraries were clustered on 1 lane of a flowcell. After clustering, the flowcell was loaded on the Illumina HiSeq instrument (4000 or equivalent) according to manufacturer’s instructions. The samples were sequenced using a 2x150bp Paired End (PE) configuration. Image analysis and base calling were conducted by the HiSeq Control Software (HCS). Raw sequence data generated from Illumina HiSeq was converted into fastq files and de-multiplexed using Illumina's bcl2fastq 2.17 software. One mismatch was allowed for index sequence identification. Three replicate samples per group were used . R (v.4.0.3) was used to perform bioinformatics analysis. Quality control was performed using FastQC (v0.11.8). Trim Galore! (version 0.6.5) was used to trim the adapter sequences with a quality threshold of 20. The human genome reference used was GRCh38.p13 and GENCODE release 36. Alignment was performed using STAR aligner (v2.7.5b). Gene level read counts were obtained by using Salmon (v1.2.1) for all libraries . All samples passed the quality control requirements with > 60% of reads uniquely mapping (>20M uniquely mapped reads for each library) using STAR. Differential expression analysis was performed using the gene level read counts and the DESeq2 (v1.28.1) R package. Heatmaps show the z-scores of gene-level read counts and were generated using heatmaply (v1.1.0). Genes with adjusted p-value less than 0.05 were considered differentially expressed.
2021-04-02 | GSE171353 | GEO
Project description:cDNA depleted RNA (500ng total RNA input) was fragmented to 150-200 nucleotides in first strand buffer for 3 minutes at 94°C. Random hexamer primed first strand was generated in presence of dATP, dGTP, dCTP and cTTP. Second strand was generated using dUTP instead of dTTP to tag the second strand. Subsequent steps to generate the sequencing libraries were performed with the KAPA HTP Library Preparation Kit for Illumina sequencing with minor modifications, i.e., after indexed adapter ligation to the dsDNA fragments, the library was treated with USER enzyme (NEB_M5505L) in order to digest the second strand derived fragments. After amplification of the libraries, samples with unique sample indexes were pooled and sequenced paired-end 2x50bp on a HiSeq2500 system following standard Illumina guidelines.
| EGAD00001003806 | EGA
Project description:Purpose: The main Inflammatory Bowel Disease (IBD) Multi'omics Database (IBDMDB) study includes multi’omics measurements from over 100 subjects, sampled biweekly over up to a year in both adult and pediatric patients with IBD (Crohn’s disease and ulcerative colitis), along with non-IBD controls. Data types include fecal metagenomes, metatranscriptomes, metabolomes, and proteomes, as well as host genetics, intestinal biopsy transcriptomes, epigenetics, and 16S amplicon profiles. Subjects’ medical histories and demographics are collected at baseline and medication, diet, and disease activity profiled longitudinally. Methods: Methods: Total RNA was quantified using theQuant-iT™ RiboGreen® RNA Assay Kit and normalized to 5ng/ul. Following plating, 2 uL of ERCC controls (using a 1:1000 dilution) were spiked into each sample. An aliquot of 200ng for each sample was transferred into library preparation which was an automated variant of the Illumina TruSeq™ Stranded mRNA Sample Preparation Kit. This method preserves strand orientation of the RNA transcript. It uses oligo dT beads to select mRNA from the total RNA sample. It is followed by heat fragmentation and cDNA synthesis from the RNA template. The resultant 500bp cDNA then goes through library preparation (end repair, base ‘A’ addition, adapter ligation, and enrichment) using Broad designed indexed adapters substituted in for multiplexing. After enrichment the libraries were quantified using Quant-iT PicoGreen (1:200 dilution). After normalizing samples to 5 ng/uL, the set was pooled and quantified using the KAPA Library Quantification Kit for Illumina Sequencing Platforms. The entire process is in 96-well format and all pipetting is done by either Agilent Bravo or Hamilton Starlet. Pooled libraries were normalized to 2nM and denatured using 0.1 N NaOH prior to sequencing. Flowcell cluster amplification and sequencing were performed according to the manufacturer’s protocols using either the HiSeq 2000.
2018-03-17 | GSE111889 | GEO
Project description:Purpose: The goal of this study is to complare the transcitpional profiles of freshly isolated, splenic, murin GCBC and other activated and naive non-germinal center B cell populations. Methods: Cells were freshly isolated, bead purified and FACS Ari sorted . Sorted cells (1.5-3x106 cells per sample) were washed twice in cold PBS and RNA was prepared using shredder-columns (Qiagen; QIAshredder 79656) and the RNeasy Plus Mini kit (Qiagen) following the manufacturer’s instructions. 3 independent RNA libraries per cell population were prepared using Illumina TruSeq Stranded mRNA sample preparation kit. The first step in the workflow involves purifying the poly-A containing mRNA molecules using poly-T oligo attached magnetic beads. Following purification, the mRNA is fragmented into small pieces using divalent cations. The cleaved RNA fragments are copied into first strand cDNA using reverse transcriptase and random primers. Strand specificity is achieved by using dUTP in the Second Strand Marking Mix, followed by second strand cDNA synthesis using DNA Polymerase I and RNase H. The products are then purified and enriched with PCR to create the final cDNA library. The cDNA libraries are validated using KAPA Biosystems primer premix kit with Illumina-compatible DNA primers and Qubit 2.0 fluorometer. Quality is examined using Agilent Tapestation 2200.The cDNA libraries were pooled at a final concentration 1.8pM. Samples were sequenced using Illumina NextSeq 500 with 75bp paired-end reads and aligned to the mm10 genome using the STAR aligner. The number of uniquely aligned reads ranged from 31 to 77 million. Using an optimized data analysis workflow, Gene-level counts were determined using featureCounts and raw counts were analyzed for differential expression using the “voom” method in the “limma” R package. Results: After determining genes that were differentially expressed between splenic GCBC and activated B cells, we performed gene set enrichment analysis (GSEA). Differentially expressed genes were compared to several previously defined hypoxic gene signatures.
2020-01-01 | GSE128710 | GEO
Project description:We generated C57BL/6 mice lacking Bmp10 and/or Bmp9 utilizing the Cre-loxP system. Briefly, Bmp9 constitutive deletion resulted from the replacement of exon 2 by a neomycin resistance cassette. Because Bmp10 deletion leads to early embryonic lethality, we used the tamoxifen-inducible Cre system to generate Bmp10-cKO mice (Rosa26-CreERT2;Bmp10lox/lox) by crossing Rosa26-CreERT2 mice with Bmp10lox/lox mice that possess loxP sites flanking exon 2. To generate double-KO (DKO) mice, we crossed these Rosa26-CreERT2;Bmp10lox/lox mice with Bmp9-KO mice. At the age of 8 weeks, mice were treated with tamoxifen (Sigma) by intraperitoneal injection once a day for 5 days at a dosage of 50 mg/kg. At the age of 5 months, Wild Type and DKO mouse lung tissue was flash frozen in liquid nitrogen and stored at -80°C. RNA extraction, RNA sample quality assessment, RNA library preparation, sequencing and raw data analysis were conducted at GENEWIZ, Inc. (South Plainfield, NJ, USA). Total RNA was extracted from frozen tissue using the Qiagen RNeasy Plus Mini kit. RNA samples were quantified using Qubit 2.0 Fluorometer (Life Technologies, Carlsbad, CA, USA) and RNA integrity was checked with Agilent TapeStation (Agilent Technologies, Palo Alto, CA, USA). rRNA depletion was performed using Ribozero rRNA Removal Kit (Illumina, San Diego, CA, USA). RNA sequencing library preparation used NEBNext Ultra RNA Library Prep Kit for Illumina by following the manufacturer’s recommendations (NEB, Ipswich, MA, USA). Briefly, enriched RNAs were fragmented for 15 minutes at 94 °C. First strand and second strand cDNA were subsequently synthesized. cDNA fragments were end repaired and adenylated at 3’ends, and universal adapter was ligated to cDNA fragments, followed by index addition and library enrichment with limited cycle PCR. Sequencing libraries were validated using the Agilent Tapestation 4200 (Agilent Technologies, Palo Alto, CA, USA), and quantified by using Qubit 2.0 Fluorometer (Invitrogen, Carlsbad, CA) as well as by quantitative PCR (Applied Biosystems, Carlsbad, CA, USA). The sequencing libraries were clustered on one lane of a flowcell. After clustering, the flowcell was loaded on the Illumina HiSeq 4000 instrument (or equivalent) according to manufacturer’s instructions. The samples were sequenced using a 2x150 Paired End (PE) configuration. Image analysis and base calling were conducted by the HiSeq Control Software (HCS). Raw sequence data (.bcl files) generated from Illumina HiSeq was converted into fastq files and de-multiplexed using Illumina's bcl2fastq 2.17 software. One mis-match was allowed for index sequence identification. After investigating the quality of the raw data, sequence reads were trimmed to remove possible adapter sequences and nucleotides with poor quality using Trimmomatic v.0.36. The trimmed reads were mapped to the the Mus musculus GRCm38 reference genome available on ENSEMBL using the STAR aligner v.2.5.2b. Gene counts were calculated from uniquely mapped reads using feature Counts from the Subread package v.1.5.2. Only unique reads that fell within exon regions were counted. The gene hit counts table was then used for downstream differential expression analysis. A differential gene expression analysis between WT and DKO groups of samples was performed using the R-package DESeq2 (Wald test).
2021-06-01 | E-MTAB-10392 | biostudies-arrayexpress
Project description:Four purified RNA extracts (2 from cells grown in glucose supplemented medium and another 2 from cells grown in PE supplemented medium) were subjected to sequencing. Following cDNA library preparations, the final sequencing libraries were quantified using the KAPA kit (KAPA Biosystem, USA) on a Stratagene Mx-3005P qPCR system (Agilent Technologies, USA) and the respective library sizes were confirmed using Agilent Bioanalyzer High Sensitivity DNA Chip (Agilent Technologies, USA). The resulting libraries were subjected to cluster generation and sequenced using an Illumina flow cell, 202 cycles (101 bp paired-end reads) on the Illumina HiSeq 2000 system (Illumina, USA).
2017-12-19 | E-MTAB-4182 | biostudies-arrayexpress
Project description:Intent of the experiment: evaluate whether copy number gains and losses occur throughout the processing of passaging, i.e. test the genomic stability of the patient-derived xenograft models. DNA was extracted from frozen xenograft samples of different passages. KAPA DNA Library Preparation Kit was used to prepare DNA libraries, which were sequenced at low coverage on a HiSeq2000 (Illumina) with a V3 flowcell generating 50bp reads. Raw reads were aligned to the human reference genome version hg19 with Burrows-Wheeler Aligner software package and after duplicate removal further analyzed with QDNAseq to exclude known regions with low mapping quality, correct for the genomic wave and to count the reads per bin. Binned data were further segmented with the ASCAT (Allele-Specific Copy number Analysis of Tumours) algorithm.
2019-04-30 | E-MTAB-7826 | biostudies-arrayexpress
Project description:Purpose: To determine the transcriptional differences between skin from patients with atopic dermatitis and control skin obtained from the healthy margins of Mohs surgery patients Methods: 4 mm skin biopsies of skin from atopic dermatitis patients or deidentified healthy margin surgical tissue were obtained and stored in RNA Later (-80C). Whole tissue RNA was isolated from tissue processed with a bead homogenizer using the QIAGEN RNeasy kit. Following DNase treatment (TurboDNase, Invitrogen), ribosomal RNA was removed (Ribo-zero kit, Illumina). mRNA was then fragmented in buffer containing 40 mM Tris acetate (pH 8.2), 100 mM potassium acetate, and 30 mM magnesium acetate and heated to 94C for 150 s. mRNA was reverse transcribed to yield cDNA using SuperScript III RT enzyme (Invitrogen, per manufacturer’s instructions) and random hexamers. A second strand reaction was performed to yield dscDNA. cDNA was blunt ended, had an A base added to the 30 ends, and then had Illumina sequencing adapters ligated to the ends. Ligated fragments were then amplified for 12 cycles using primers incorporating unique index tags. Fragments were sequenced on an Illumina HiSeq-3000 using single reads extending 50 bases. Samples were sequenced to an average depth of 32 million 1x50 reads on a HiSeq3000 (Illumina). Reads were aligned to Homo_sapiens reference build Ensembl_R76 using STAR, gene counts were determined with Subread:featureCount, transcript counts were produced by Sailfish, and sequence performance was assessed with RSeQC v2.3.
2019-11-15 | GSE140380 | GEO
Project description:Introduction: Inflammatory bowel disease (IBD) is a complex multi-factorial disease for which physiologically relevant in vitro models are lacking. Existing models are often a compromise between biological relevance and scalability. Here, we integrated intestinal epithelial cells (IEC) derived from human intestinal organoids from 3 different donors in a gut-on-a-chip platform to model the human intestine and key aspects of IBD. The goal of our transcriptomics experiment was to compare microfluidic-grown IEC to donor-paired HIO cultures in standard Matrigel droplets used for gut-on-a-chip seeding. Methods: For the microfluidic gut-on-a-chip, IEC cells were seeded in the top channel of a 3-lane OrganoPlate on top of a Collagen I gel embedded in the middle channel. Cells were kept in HISC medium devoid of A83-01 for 2 days, before medium was switched back to HISC medium. 6 days after seeding, cells were triggered with LPS 100ng/mL, IFN-γ 20ng/mL for 24 hours. RNA was isolated with TRI-reagent followed by a phenol-chloroform extraction. For the static Matrigel-grown HIO, RNA was isolated of confluent cultures with TRI-reagent followed by a phenol-chloroform extraction. Library preparations, sequencing reactions were conducted at GENEWIZ, LLC. (South Plainfield, NJ, USA). RNA samples were quantified using Qubit 2.0 Fluorometer (Life Technologies, Carlsbad, CA, USA) and RNA integrity was checked with 4200 TapeStation (Agilent Technologies, Palo Alto, CA, USA). rRNA depletion was performed using Ribozero rRNA Removal Kit (Illumina, San Diego, CA, USA). RNA sequencing library preparation used NEBNext Ultra RNA Library Prep Kit for Illumina by following the manufacturer’s recommendations (NEB, Ipswich, MA, USA). Briefly, enriched RNAs were fragmented for 15 minutes at 94 °C. First strand and second strand cDNA were subsequently synthesized. cDNA fragments were end repaired and adenylated at 3’ends, and universal adapter was ligated to cDNA fragments, followed by index addition and library enrichment with limited cycle PCR. Sequencing libraries were validated using the Agilent Tapestation 4200 (Agilent Technologies, Palo Alto, CA, USA), and quantified by using Qubit 2.0 Fluorometer (Invitrogen, Carlsbad, CA) as well as by quantitative PCR (Applied Biosystems, Carlsbad, CA, USA). The sequencing libraries were multiplexed and clustered on one lane of a flowcell and loaded on the Illumina HiSeq instrument according to manufacturer’s instructions. The samples were sequenced using a HiSeq 2x150 Paired End (PE) configuration. Image analysis and base calling were conducted by the HiSeq Control Software (HCS). Raw sequence data (.bcl files) generated from Illumina HiSeq was converted into fastq files and de-multiplexed using Illumina's bcl2fastq 2.17 software. One mis-match was allowed for index sequence identification.
2020-06-25 | GSE153191 | GEO
Project description:The purified RNA from NFs (n=1) and KFs (n=1) treated with DMSO or ASC-J9 was used for the preparation of the sequencing library by the TruSeq Stranded mRNA Library Prep Kit (Illumina, San Diego, CA, USA) according to the manufacturer’s recommendations. Briefly, mRNA was purified from total RNA (1 µg) by oligo(dT)-coupled magnetic beads and fragmented into small pieces under elevated temperature. The first-strand cDNA was synthesized using reverse transcriptase and random primers. After the generation of double-strand cDNA and adenylation on the 3’ ends of DNA fragments, the adaptors were ligated and purified with the AMPure XP system (Beckman Coulter, Beverly, USA). The quality of the libraries was assessed by the Agilent Bioanalyzer 2100 system and a real-time PCR system. The qualified libraries were then sequenced on an Illumina NovaSeq 6000 platform with 150-bp paired-end reads generated by Genomics BioSci & Tech Co., Ltd.
2022-06-01 | GSE198095 | GEO