Transcription profiling by array of Arabidopsis wild type and transgenic lines grown under normal or salt stress conditions
Ontology highlight
ABSTRACT:
Atleast two ATH1 Genome Array was used for hybridisation for each group of samples.
ORGANISM(S): Arabidopsis thaliana
SUBMITTER: Sangram Lenka
PROVIDER: E-MEXP-2858 | biostudies-arrayexpress |
REPOSITORIES: biostudies-arrayexpress
Similar Datasets
Project description:High quality RNA was extracted from the whole seedlings (Combined root and leaf samples) using TRI Reagent (Ambion, Inc. USA) and pooled from 12 independent stressed and non-stressed plant samples separately, and treated with DNase-I (QIAGEN GmbH, Germany). Subsequently, RNA cleanup was carried out using RNeasy Plant Mini Kit (QIAGEN GmbH, Germany) and 5 ug of total RNA from each sample in triplicates were reverse-transcribed to double stranded cDNA using the GeneChipï¾® One-Cycle cDNA Synthesis Kit. The biotin-labelled cRNA was made using the GeneChipï¾® IVT Labelling Kit (Affymetrix, CA, USA). Twenty microgram of cRNA samples was fragmented and out of which which 7.5 ug cRNA were hybridized for 16 hours at 45C to the Affymetrix GeneChipï¾® Rice Genome Array (Santa Clara, CA, USA). After washing and staining with R-phycoerythrin streptavidin in a Fluidics Station, using the Genechipï¾® Fluidics Station 450, the arrays were scanned by the Genechipï¾® 3000 Scanner. The chip images were scanned and extracted using default settings and the CEL files were produced with the Affymetrix GeneChip Operating Software (GCOS 1.2). The resulting .CEL files were imported into the GeneSpring GX 10 (Agilent Technologies Inc, Santa Clara CA) and normalized with the PLIER16 algorithm. The resulting expression values were log2-transformed. Average log signal intensity values of three technical replicates for each sample were used for advance analysis.
2010-10-09 | E-MEXP-2401 | biostudies-arrayexpress
Project description:Tomato pericarp tissues at three different stages (green, breaker and ripening) of fruit development from both the above genotypes were collected using a sterile surgical blade and flash frozen in liquid nitrogen. High quality RNA was extracted from the frozen pericarp tissue using TRI Reagent (Ambion, INC. USA) and pooled at least from three independent samples and treated with DNase-I (QIAGEN GmbH, Germany). RNA cleanup was carried out using RNeasy Plant Mini Kit (QIAGEN GmbH, Germany) and 5ug of total RNA from each sample with three biological replications were reverse-transcribed to double stranded cDNA using the GeneChipR One-Cycle cDNA Synthesis Kit. The biotin-labelled cRNA was made using the GeneChipR IVT Labelling Kit (Affymetrix, CA, USA). 15 ug of cRNA samples was fragmented and was hybridized for 16 hours at 45C to the Affymetrix tomato GeneChip Array (Santa Clara, CA, USA). After washing and staining with R-phycoerythrin streptavidin in a Fluidics Station, using the GenechipR Fluidics Station 450, the arrays were scanned by the GenechipR 3000 Scanner. The chip images were scanned and extracted using default settings and the .CEL files were produced by using the Affymetrix GeneChip Operating Software (GCOS 1.2). Samples that passed through various quality checks (data not shown) were normalized with RMA algorithm using GeneSpring GX 10 (Agilent Technologies Inc., Santa Clara, CA, USA). Probes showing twofold up- or down-regulation (in Log2 transformed values) compared to corresponding control condition were taken only into consideration for further analysis
2011-01-04 | E-MEXP-2934 | biostudies-arrayexpress
Project description:Light-controlled in situ synthesis of DNA microarrays (Affymetrix GeneChip® Mouse Genome 430 2.0) were performed to determine the altered gene expression. Affymetrix algorithm and multiple analysis comparison software were used for assessing gene expression differences, and mRNAs that increased or decreased in the brains of NP(α-M)-treated mice relative to that in the brains of Blank-NP-treated mice were identified. For the assay, total RNA was extracted using Takara RNAiso Plus Kit (Cat#9109, Takara, DaLian, LiaoNing, CN) following the manufacturer’s instructions and checked for a RIN number to inspect RNA integrity by an Agilent Bioanalyzer 2100 (Agilent technologies, Santa Clara, CA, US). Qualified total RNA was further purified by RNeasy mini kit (Cat#74106, QIAGEN, GmBH, Germany) and RNase-Free DNase Set (Cat#79254, QIAGEN, GmBH, Germany). Array hybridization and wash was performed using GeneChip® Hybridization, Wash and Stain Kit (Cat#900720, Affymetrix, Santa Clara, CA, US) in Hybridization Oven 645 (Cat#00-0331-220V, Affymetrix, Santa Clara, CA, US) and Fluidics Station 450 (Cat#00-0079, Affymetrix, Santa Clara, CA, US) followed the manufacturer’s instructions. Slides were scanned by GeneChip® Scanner 3000 (Cat#00-00212, Affymetrix, Santa Clara, CA, US) and Command Console Software 4.0 (Affymetrix, Santa Clara, CA, US) with default settings. Raw data were normalized by MAS 5.0 algorithm, Gene Spring Software12.6.1 (Agilent technologies, Santa Clara, CA, US).
2018-09-14 | GSE119904 | GEO
Project description:In low rainfall regions soils are naturally conditioned with frequent co-occurrence of salinity and alkalinity. Plant salinity responses both at physiological and molecular level have been extensively researched. However, effects of the combined treatment of alkaline salinity that could greatly reduce plant growth and the mechanisms responsible for tolerance remain indeterminate. In Brassica juncea, large reductions in biomass and increased leaf Na+ concentration under alkaline salinity indicates that the combined treatment had greater negative effect than salinity on both growth and the physiological responses of the plant. To determine molecular mechanisms potentially controlling adaptive tolerance responses to salinity and alkaline salinity, the moderately tolerant genotype NDR 8501 was further investigated using microarray analysis. The transcripts of treated leaf tissues verses those of the untreated control sample were analysed after prolonged stress of four weeks. In total, 528 salinity responsive and 1245 alkaline salinity responsive genes were indentified and only 101 genes were expressed jointly in either of the two treatments. Transcription of 37% more genes involved in response to alkaline salinity than salinity alone, which suggests the increased impact and severity of the combined stress on the plant, indicating the transcription of a far greater number of genes likely involved in mitigation and damage control. Transcription of KUP2 and KUP7 genes involved in potassium homeostasis under salinity alone and NHX1 and ENH1 genes for ion (K+ and Na+) homeostasis under alkaline salinity, clearly demonstrated that different genes and genetic pathways are involved in response to each stress. They further provide supporting evidence for the physiological responses that occur in the plant, with massive reprogramming of the transcriptome leading to partial ion exclusion, shuttling and compartmentation. Salinity and alkaline salinity induced gene expression in Brassica juncea leaf was measured at 4 weeks of prolonged treatment of 50 mM NaCl alone and combined with 2.5 mM HCO3- versus non-stressed control. A single experiment was conducted using Brassica juncea genotype NDR 8501 at a single time point (fours weeks after treatment) with three replications per treatment.
2012-06-25 | E-GEOD-38905 | biostudies-arrayexpress
Project description:STEE regulated a wide range of biological processes in the cerebral cortex of SAMP8 mice. RNA samples were extracted from cerebral cortices with Isogen (Nippon Gene, Toyama, Japan) and were amplified and biotinylated with Affymetrix 3’ IVT PLUS Reagent Kit (Affymetrix, Santa Clara, CA), according to the manufacturer’s instructions. The integrity of RNA was quantified using NanoDrop 2000 spectrophotometer (Thermo Scientific, Wilmington, DE) and one hundred ng of total RNA from each sample was used to generate amplified and biotinylated complementary RNA (cRNA) from poly (A) RNA in a total RNA. Biotinylated cRNA was hybridized onto Affymetrix Mouse Genome 430 PM array strips (Affymetrix) for 16 hrs at 45℃ in the hybridization station. The hybridized arrays were washed, stained, and scanned with GeneAtlas Fluidics and Imaging Station.
2020-09-14 | GSE151727 | GEO
Project description:The supply of soluble silicon (Si) to plants has been associated with many benefits that remain poorly explained and often contested. In this work, the effect of Si was studied on wheat plants under both control and pathogen stress (Blumeria graminis f.sp. tritici (Bgt)) conditions by conducting an exhaustive transcriptomic analysis (55,000 genes) aimed at comparing the differential response of plants under four treatments. The response to the supply of Si on control (uninfected) plants was limited to 47 genes providing little evidence of regulation of a specific metabolic process. Plants reacted to inoculation with Bgt by an up-regulation of many genes linked to stress and metabolic processes and a down-regulation of genes linked to photosynthesis. Supplying Si to inoculated plants largely prevented disease development, a phenotypic response that translated into a nearly perfect reversal of genes regulated by the effect of Bgt alone. These results suggest that Si plays a limited role on a plantâs metabolism in absence of stress, even in the case of a high-Si accumulating monocot such as wheat. On the other hand, the benefits of Si, in the form of biotic stress alleviation, were remarkably aligned with a counter-response to transcriptomic changes induced by the pathogen Bgt. Experiment Overall Design: Wheat culture in hydroponic system : Experiment Overall Design: Hydroponic systems were used to precisely control Si feeding of plants and to reduce external Si contamination. Seeds of wheat cultivar AC Drummond, chosen for its known high susceptibility to Bgt, were sown in 9-cm pots in a nylon bed consisting of nylon stockings cut into small ribbons. Hydroponic systems were set up to immerse roots for 15 minutes every 30 minutes. The plants were grown in a greenhouse (16 h light at 22°C and 8h dark at 18°C, 80% humidity). Plants were immersed in distilled water only during the first week following sowing. Experiment Overall Design: Si amendment and Bgt inoculation: Experiment Overall Design: Wheat plants were grown in the presence (Si+) or absence (Si-) of Si and inoculated (B+) or not (B-) with Bgt for a total of four treatments: Si-B-, Si+B-, Si-B+, and Si+B+. These treatments were applied in the following manner. One week after sowing, distilled water was replaced by a Hoagland solution amended or not with potassium silicate (Kasil 6, PQ Corp etc) at a concentration of 1.7 mM (Si+ Hoagland). Twice a week, Si was added to the Si+ nutrient solution in order to maintain Si concentration at 1.7 mM. Every other week, both Si- and Si+ Hoagland solutions were renewed and the pH adjusted to 5.8 in all systems at each Si addition or nutrient solution renewal. Experiment Overall Design: Four weeks after sowing (i.e. three weeks after Si amendment started), half the plants were inoculated with Bgt as described previously. Briefly, one day prior to inoculation, reservoir wheat plants heavily infected with Bgt were gently shaken to remove old spores and to stimulate the production of fresh ones. The inoculation was performed by shaking these infected wheat plants over the experimental plants . Experiment Overall Design: RNA preparation: Experiment Overall Design: Total RNA was extracted from leaves of three plants per treatment (three biological replicates) with the RNeasy plant kit (Qiagen, Hilden, Germany). Concentration and quality of RNA were assessed on a Nanodrop spectrophotometer (Nanodrop, Wilmington, De, USA) and 2100 Bioanalyzer (Agilent, Palo Alto, Ca, USA). Biotin-labeled cRNAs were synthesized using MessageAmp II-Biotin Enhanced Kit (Ambion, Austin, Tx, USA) following the manufacturerâs instructions using 1 µg total RNA. Labelled cRNA was then fragmented using 5X Array Fragmentation Buffer supplied with the MessageAmp II-Biotin Enhanced Kit. Experiment Overall Design: Microarray hybridization: Experiment Overall Design: The labeled samples were added to an Affymetrix GeneChip® Wheat Genome Array (Affymetrix, Santa Clara, CA, USA), according to the manufacturerâs instructions. The wheat chip contains probe sets representing 55,052 transcripts for all 42 chromosomes in the wheat genome. The chips were hybridized for 16 h at 45 °C in a rotisserie oven at 60 rpm. Following hybridization, the arrays were washed and stained in an Affymetrix Fluidics Station 450, according to the standard protocol from Affymetrix, and scanned using an Affymetrix Scanner 3000. Twelve chips were prepared and corresponded to three biological replications of each of the four treatments (Si-B-, Si+B-, Si-B+, and Si+B+).
2009-07-04 | E-GEOD-12936 | biostudies-arrayexpress
Project description:The functions of miRNAs and their target mRNAs in Arabidopsis development have been widely documented, however, roles of stress responsive miRNAs and their targets are not as well understood. Using small RNA deep sequencing and ATH1 microarrays to profile mRNAs, we identified IAR3 (IAA-Ala Resistant 3) as a novel target of miR167a. 2 organs X 3 treatments X 3 replicates This submission represnts ATH1 microarrays component of study.
2012-09-19 | E-GEOD-36789 | biostudies-arrayexpress
Project description:The H1299 cells stably transfected with mutp53 R282W or the control vector were respectively analyzed by Affymetrix GeneChip miRNA 4.0 microarray with three biological replications. The labeled RNA was consequently hybridized for sixteen hours to an Affymetrix GeneChip miRNA array according to the product manual. Microarrays were washed and stained in the Affymetrix Fluidics Station 450, and scanned on the Affymetrix G3000 GeneArray Scanner.
2015-10-10 | GSE73876 | GEO
Project description:Gene expression microarray was performed using early log phase culture at 37 degree and 200 rpm followed by RNA extraction from M.tb H37Rv, HigB KO M.tb H37Rv and complemented Hig B KO M.tb H37Rv For gene expression profiling, total RNA was isolated from wild type H37Rv, higB KO mutant strain and complemented strains. The bacterial pellets for M.tb H37Rv wild type, M.tb H37Rv HigB KO mutant strain and complemented strain were resuspended in 1.0 ml TRIzol (Invitrogen Corporation, Carlsbad, CA); mRNA was extracted as per standard protocols and cleaned using RNAeasy columns (Qiagen GmbH, Hilden, Germany). Extracted mRNA (1 μg) was treated with DNase I using the Ambion DNA-free kit (Invitrogen Corporation, Carlsbad, CA) to remove genomic DNA contamination and quantified using Nanodrop 2000c spectrophotometer (Thermo Scientific, USA). The purity and integrity of RNA samples were assessed Agilent 2100 Bio analyzer (Agilent TechnologiesInc., USA). Further, 25ng of RNA was amplified and labeled using Low input Quick Amp WT Labeling kit (Agilent Technologies, USA). The labeled cRNA was purified using RNAeasy columns (Qiagen, USA) and total yields were quantified using Nanodrop 2000c spectrophotometer.
2021-11-30 | GSE179403 | GEO
Project description:YEAST STRAIN: A genetically modified Saccharomyces cerevisiae yeast strain with PMI40 knockout (MATa URA3 TRP1 LEU2 his3- 1 MAL2-8C SUC2 PMI40::HIS3). The parent strain was CEN.PK113-7A (MATa URA3 TRP1 LEU2 his3- 1 MAL2-8C SUC2) obtained from Euroscarf (9). CULTIVATION MEDIUM: The mineral medium used for the bioreactor cultivations was based on the composition described by Verduyn and co-workers (11). The medium consisted of 5 g/l (NH4)2SO4 (Sigma-Aldrich, USA), 3 g/l KH2PO4 (Fluka, Swizerland) and 0.5 g/l MgSO4 × 7 H2O (Sigma-Aldrich, USA), as well as 1 ml/l trace element and 1 ml/l vitamin solution. The composition of the trace element solution was 15 g/l EDTA, 4.5 g/l ZnSO4 × 7 H2O, 0.84 g/l MnCl2 × H2O, 0.3 g/l CuSO4 × 5 H2O, 3 g/l FeSO4 × 7 H2O (Riedel-de-Haën AG, Germany), 0.1 g/l KI, 0.3 g/l CoCl3 × 6 H2O, 1 g/l H3BO3, 4.5 g/l CaCl2 × 2 H2O (Merck, Germany), and 0.4 g/l Na2MoO4 × 2 H2O (BDH Laboratory Supplies, UK). The composition of the vitamin solution was 0.05 g/l D-Biotin, 1 g/l Ca-pantothenate, 1 g/l Nicotinic acid, 25 g/l myo-inositol, 1 g/l Thiamine-HCl, 1 g/l Pyridoxine HCl, and 0.2 g/l p-aminobenzoic acid (Sigma-Aldrich, USA). The media in each cultivation contained initially 15 g/L D-glucose and a varying amount of D-mannose (0.75 g/L, 1.0 g/L, 1.5 g/L, 3.0 g/L, or 5.0 g/L). CULTIVATIONS AND SAMPLING: Bioreactor cultivations were performed in 3.2 l Braun Biostat CT2-DCU 3 instruments (B. Braun Biotech International GmbH, Germany). The cultivation temperature was +30 °C, agitation speed 1000 rpm, initial cultivation volume 2.0 l, airflow 1.0 l/min, and pH 5.0. In each cultivation, samples for the measurement of gene expression levels were taken 6 hours after inoculation. MEASUREMENT OF GENE EXPRESSION LEVELS: 0.9 mg CDW of cells were quenched in cold (-40 °C) methanol (45%) and centrifuged (1 min, +4 °C, 16100 G). The pellets were suspended in 400 µl of breaking buffer (20 mM Tris-HCl pH 7.4, 100 mM KCl, 2 mM MgCl2, 2mM DTT), 400 µl 1:1 phenol-chloroform, and 5 µl 20% SDS. Equal volume of glass beads (diameter 0.40-0.60 mm, B.Braun Biotech International, Germany) were added and samples were shaken in a bead beater (Mini-BeadBeater-8, BioSpec Products, USA) three times 1 minute at +4 °C. The mixtures were centrifuged (15 min, +4 °C, 16100 G in 5415 R, Eppendorf AG, Germany) and supernatants were recovered. The total RNA was purified from the supernatants using the QIAGEN RNeasy Mini kit (Qiagen, USA) according to manufacturers instructions. After this step the double-stranded cDNA was synthesized from 15 µg of total RNA with SuperScript Double-Stranded cDNA synthesis kit (Invitrogen, USA) using a T7-oligo(dT) primer. Biotin-labeled cRNA was then synthesized employing an Enzo High Yield RNA Transcript Labeling Kit (Enzo Life Science, USA). The biotin-labeled cRNA was heat-fragmented and biotinylated cRNAs were hybridized to Affymetrix YG-S98 microarrays in Affymetrix Hybridization Oven 640. Washing and staining of arrays were performed using the GeneChip Fluidics Station 450 and scanning with the Affymetrix GeneChip Scanner 3000. Acquisition and quantification of array images were performed using the Affymetrix GeneChip Operating System 1.0. The signals were scaled into target intensity of 100. All samples were assayed in triplicates. Keywords: dose response
2004-11-10 | GSE1938 | GEO