Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Reflow transfer for conformal three-dimensional microprinting.

ABSTRACT: From microcircuits to metamaterials, the micropatterning of surfaces adds valuable functionality. For nonplanar surfaces, incompatibility with conventional microlithography requires the transfer of originally planar micropatterns onto those surfaces; however, existing approaches accommodate only limited curvatures. A microtransfer approach was developed using reflowable materials that transform between solid and liquid on demand, freely stretching to yield transfers that naturally conform down to nanoscale radii of curvature and arbitrarily complex topographies. Such reflow transfer helps generalize microprinting, extending the reach of precision planar microlithography to highly nonplanar substrates and microstructures. With gentle water-based processing, reflow transfer can be applied to a range of materials, with microprinting demonstrated onto metal, plastic, paper, glass, polystyrene, semiconductor, elastomer, hydrogel, and multiple biological surfaces.

SUBMITTER: Zabow G

PROVIDER: S-EPMC10013203 | biostudies-literature | 2022 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Reflow transfer for conformal three-dimensional microprinting.

Zabow G G

Science (New York, N.Y.) 20221124 6622

From microcircuits to metamaterials, the micropatterning of surfaces adds valuable functionality. For nonplanar surfaces, incompatibility with conventional microlithography requires the transfer of originally planar micropatterns onto those surfaces; however, existing approaches accommodate only limited curvatures. A microtransfer approach was developed using reflowable materials that transform between solid and liquid on demand, freely stretching to yield transfers that naturally conform down t ...[more]

PMID: 36423286

Similar Datasets

Multiscale conformal pattern transfer.

Project description:We demonstrate a method for seamless transfer from a parent flat substrate of basically any lithographic top-down or bottom-up pattern onto essentially any kind of surface. The nano- or microscale patterns, spanning macroscopic surface areas, can be transferred with high conformity onto a large variety of surfaces when such patterns are produced on a thin carbon film, grown on top of a sacrificial layer. The latter allows lifting the patterns from the flat parent substrate onto a water-air interface to be picked up by the host surface of choice. We illustrate the power of this technique by functionalizing broad range of materials including glass, plastics, metals, rough semiconductors and polymers, highlighting the potential applications in in situ colorimetry of the chemistry of materials, anti-counterfeit technologies, biomolecular and biomedical studies, light-matter interactions at the nanoscale, conformal photovoltaics and flexible electronics.

| S-EPMC4916408 | biostudies-literature

Size-controlled conformal nanofabrication of biotemplated three-dimensional TiO? and ZnO nanonetworks.

Project description:A solvent-free fabrication of TiO? and ZnO nanonetworks is demonstrated by using supramolecular nanotemplates with high coating conformity, uniformity, and atomic scale size control. Deposition of TiO? and ZnO on three-dimensional nanofibrous network template is accomplished. Ultrafine control over nanotube diameter allows robust and systematic evaluation of the electrochemical properties of TiO? and ZnO nanonetworks in terms of size-function relationship. We observe hypsochromic shift in UV absorbance maxima correlated with decrease in wall thickness of the nanotubes. Photocatalytic activities of anatase TiO? and hexagonal wurtzite ZnO nanonetworks are found to be dependent on both the wall thickness and total surface area per unit of mass. Wall thickness has effect on photoexcitation properties of both TiO? and ZnO due to band gap energies and total surface area per unit of mass. The present work is a successful example that concentrates on nanofabrication of intact three-dimensional semiconductor nanonetworks with controlled band gap energies.

| S-EPMC3725508 | biostudies-other

Three-dimensional conformal radiation therapy alone for esophageal squamous cell carcinoma: 10-year survival outcomes.

Project description:BackgroundConcurrent chemoradiation is the standard treatment for locally advanced esophageal squamous cell carcinoma (SCC). We conducted a phase II study to explore the effect of three-dimensional conformal radiotherapy (3-DCRT) alone for patients with locally advanced esophageal SCC. This study aimed to analyze the long-term survival outcomes.MethodsBetween November 2004 and April 2007, 30 patients with thoracic esophageal SCC underwent late-course sequential boost 3-DCRT at Fudan University Shanghai Cancer Center. The planning target volume (PTV1) comprised a 1.2-1.5 cm lateral margin around the gross tumor volume and a 3.0 cm margin, superior and inferior to the gross tumor volume. PTV2 encompassed the gross tumor volume with a margin of 0.5-0.7 cm. The PTV1 dose delivered was 50 Gy, and the PTV2 dose was a boost dose of 16 Gy, resulting in a total dose of 66 Gy. No chemotherapy was administered.ResultsThe median follow-up time was 30 months for all patients, and 132 months for patients who were alive. The median overall survival was 27 months (95% confidence interval [CI] 18.9-35.0). The 2-, 5-, and 10-year overall survival rates were 56.6%, 33.3%, and 26.6%, respectively. The median progression-free survival was 14 months (95% CI 7.7-20.2 months), and the 2-, 5-, and 10-year progression-free survival rates were 33.3%, 30.0%, and 26.6%, respectively. No severe late toxicity was observed in long-term survivors.ConclusionLate-course sequential boost 3-DCRT is safe and feasible with promising long-term outcomes for esophageal SCC.

| S-EPMC6397900 | biostudies-literature

Large-area transfer of two-dimensional materials free of cracks, contamination and wrinkles via controllable conformal contact.

Project description:The availability of graphene and other two-dimensional (2D) materials on a wide range of substrates forms the basis for large-area applications, such as graphene integration with silicon-based technologies, which requires graphene on silicon with outperforming carrier mobilities. However, 2D materials were only produced on limited archetypal substrates by chemical vapor deposition approaches. Reliable after-growth transfer techniques, that do not produce cracks, contamination, and wrinkles, are critical for layering 2D materials onto arbitrary substrates. Here we show that, by incorporating oxhydryl groups-containing volatile molecules, the supporting films can be deformed under heat to achieve a controllable conformal contact, enabling the large-area transfer of 2D films without cracks, contamination, and wrinkles. The resulting conformity with enhanced adhesion facilitates the direct delamination of supporting films from graphene, providing ultraclean surfaces and carrier mobilities up to 1,420,000 cm2 V-1 s-1 at 4 K.

| S-EPMC9338253 | biostudies-literature

Wrap-like transfer printing for three-dimensional curvy electronics.

Project description:Three-dimensional (3D) curvy electronics has wide-ranging application in biomedical health care, soft machine, and high-density curved imager. Limited by material properties, complex procedures, and coverage ability of existing fabrication techniques, the development of high-performance 3D curvy electronics remains challenging. Here, we propose an automated wrap-like transfer printing prototype for fabricating 3D curvy electronics. Assisted by a gentle and uniform pressure field, the prefabricated planar circuits on the petal-like stamp are integrated onto the target surface intactly with full coverage. The driving pressure for the wrapping is provided by the strain recovery of a prestrained elastic film triggered by the air pressure control. The wrapping configuration and strain distribution of the stamp are simulated by finite element analysis, and the pattern and thickness of the stamps are optimized. Demonstration of this strategy including spherical meander antenna, spherical light-emitting diode array, and spherical solar cell array illustrates its feasibility in the development of complex 3D curvy electronics.

| S-EPMC10371014 | biostudies-literature

Conformal QED in two-dimensional topological insulators.

Project description:It has been shown that local four-fermion interactions on the edges of two-dimensional time-reversal-invariant topological insulators give rise to a new non-Fermi-liquid phase, called helical Luttinger liquid (HLL). Here, we provide a first-principle derivation of this HLL based on the gauge-theory approach. We start by considering massless Dirac fermions confined on the one-dimensional boundary of the topological insulator and interacting through a three-dimensional quantum dynamical electromagnetic field. Within these assumptions, through a dimensional-reduction procedure, we derive the effective 1 + 1-dimensional interacting fermionic theory and reveal its underlying gauge theory. In the low-energy regime, the gauge theory that describes the edge states is given by a conformal quantum electrodynamics (CQED), which can be mapped exactly into a HLL with a Luttinger parameter and a renormalized Fermi velocity that depend on the value of the fine-structure constant α.

| S-EPMC5658404 | biostudies-literature

Conformal CVD-Grown MoS<sub>2</sub> on Three-Dimensional Woodpile Photonic Crystals for Photonic Bandgap Engineering.

Project description:To achieve the modification of photonic band structures and realize the dispersion control toward functional photonic devices, composites of photonic crystal templates with high-refractive-index material are fabricated. A two-step process is used: 3D polymeric woodpile templates are fabricated by a direct laser writing method followed by chemical vapor deposition of MoS2. We observed red-shifts of partial bandgaps at the near-infrared region when the thickness of deposited MoS2 films increases. A ∼10 nm red-shift of fundamental and high-order bandgap is measured after each 1 nm MoS2 thin film deposition and confirmed by simulations and optical measurements using an angle-resolved Fourier imaging spectroscopy system.

| S-EPMC10226160 | biostudies-literature

Adenovirus-mediated efficient gene transfer into cultured three-dimensional organoids.

Project description:Three-dimensional organoids have been recently established from various tissue-specific progenitors (such as intestinal stem cells), induced pluripotent stem cells, or embryonic stem cells. These cultured self-sustaining stem cell-based organoids may become valuable systems to study the roles of tissue-specific stem cells in tissue genesis and disease development. It is thus conceivable that effective genetic manipulations in such organoids may allow us to reconstruct disease processes and/or develop novel therapeutics. Recombinant adenoviruses are one of the most commonly used viral vectors for in vitro and in vivo gene deliveries. In this study, we investigate if adenoviruses can be used to effectively deliver transgenes into the cultured "mini-gut" organoids derived from intestinal stem cells. Using adenoviral vectors that express fluorescent proteins, we demonstrate that adenoviruses can effectively deliver transgenes into the cultured 3-D "mini-gut" organoids. The transgene expression can last at least 10 days in the cultured organoids. As a proof-of-principle experiment, we demonstrate that adenovirus-mediated noggin expression effectively support the survival and self-renewal of mini-gut organoids, while adenovirus-mediated expression of BMP4 inhibits the self-sustainability and proliferation of the organoids. Thus, our results strongly suggest that adenovirus vectors can be explored as effective gene delivery vehicles to introduce genetic manipulations in 3-D organoids.

| S-EPMC3973564 | biostudies-literature

Three-Dimensional Metallic Surface Micropatterning through Tailored Photolithography-Transfer-Plating.

Project description:Precise micropatterning on three-dimensional (3D) surfaces is desired for a variety of applications, from microelectronics to metamaterials, which can be realized by transfer printing techniques. However, a nontrivial deficiency of this approach is that the transferred microstructures are adsorbed on the target surface with weak adhesion, limiting the applications to external force-free conditions. We propose a scalable "photolithography-transfer-plating" method to pattern stable and durable microstructures on 3D metallic surfaces with precise dimension and location control of the micropatterns. Surface patterning on metallic parts with different metals and isotropic and anisotropic curvatures is showcased. This method can also fabricate hierarchical structures with nanoscale vertical and microscale horizontal dimensions. The plated patterns are stable enough to mold soft materials, and the structure durability is validated by 24 h thermofluidic tests. We demonstrate micropatterned nickel electrodes for oxygen evolution reaction acceleration in hydrogen production, showing the potential of micropatterned 3D metallic surfaces for energy applications.

| S-EPMC11378153 | biostudies-literature

Dosimetric comparison of incidental axillary irradiation between three-dimensional conformal and volumetric modulated arc techniques for breast cancer.

Project description:Radiotherapy techniques for breast cancer have evolved with efforts to reduce treatment-related side effects. In the present study, we conducted dosimetric analysis of incidental axillary irradiation between volumetric modulated arc therapy (VMAT) and three-dimensional conformal radiotherapy (3D-CRT). A total of 20 patients with early stage left breast cancer who underwent breast-conserving surgery followed by postoperative radiotherapy were analyzed. For VMAT plans, dose-volume constraints were not imposed on the axilla, as with 3D-CRT. We compared the dosimetric parameters of the planning target volumes, organs at risk and axillary level I-III of the two plans. VMAT showed better target coverage and a normal organ-sparing effect compared with 3D-CRT. The incidental axillary irradiation of VMAT was lower; the mean dose and the V40Gy were significantly reduced at all axillary levels, with the exception of no difference in the maximum dose to axillary level I. In conclusion, VMAT decreased incidental axillary irradiation, even in the absence of a dose-volume constraint on the axilla, and can, therefore, decrease the risk of radiotherapy-related lymphedema. However, caution is also required because it is unclear whether this incidental axillary irradiation is beneficial for reducing recurrence on the axilla.

| S-EPMC7179387 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data