Closed-loop recyclable plastics from poly(ethyl cyanoacrylate)
Ontology highlight
ABSTRACT:
SUBMITTER:
PROVIDER: S-EPMC10032590 | biostudies-literature | 2023 Mar
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Low-density polyethylene (LDPE) is one of the most important plastics, which is produced unfortunately under extreme conditions. In addition, it consists of robust aliphatic C─C bonds which are challenging to cleave for plastic recycling. A low-pressure and -temperature (pethylene = 2 bara, T = 70 °C) macromonomer-based synthesis of long chain branched polyethylene is reported. The introduction of recycle points permits the polymerization (grafting to) of the macromonomers to form the long chain branched polyethylene and its depolymerization (branch cleavage). Coordinative chain transfer polymerization employing ethylene and co-monomers is used for the synthesis of the macromonomers, permitting a high flexibility of their precise structure and efficient synthesis. The long chain branched polyethylene material matches key properties of low-density polyethylene.
| S-EPMC10987147 | biostudies-literature
Project description:Using carbon dioxide (CO2) to make recyclable thermoplastics could reduce greenhouse gas emissions associated with polymer manufacturing. CO2/cyclic epoxide ring-opening copolymerization (ROCOP) allows for >30 wt % of the polycarbonate to derive from CO2; so far, the field has largely focused on oligocarbonates. In contrast, efficient catalysts for high molar mass polycarbonates are underinvestigated, and the resulting thermoplastic structure-property relationships, processing, and recycling need to be elucidated. This work describes a new organometallic Mg(II)Co(II) catalyst that combines high productivity, low loading tolerance, and the highest polymerization control to yield polycarbonates with number average molecular weight (Mn) values from 4 to 130 kg mol-1, with narrow, monomodal distributions. It is used in the ROCOP of CO2 with bicyclic epoxides to produce a series of samples, each with Mn > 100 kg mol-1, of poly(cyclohexene carbonate) (PCHC), poly(vinyl-cyclohexene carbonate) (PvCHC), poly(ethyl-cyclohexene carbonate) (PeCHC, by hydrogenation of PvCHC), and poly(cyclopentene carbonate) (PCPC). All these materials are amorphous thermoplastics, with high glass transition temperatures (85 < Tg < 126 °C, by differential scanning calorimetry) and high thermal stability (Td > 260 °C). The cyclic ring substituents mediate the materials' chain entanglements, viscosity, and glass transition temperatures. Specifically, PCPC was found to have 10× lower entanglement molecular weight (Me)n and 100× lower zero-shear viscosity compared to those of PCHC, showing potential as a future thermoplastic. All these high molecular weight polymers are fully recyclable, either by reprocessing or by using the Mg(II)Co(II) catalyst for highly selective depolymerizations to epoxides and CO2. PCPC shows the fastest depolymerization rates, achieving an activity of 2500 h-1 and >99% selectivity for cyclopentene oxide and CO2.
| S-EPMC10979403 | biostudies-literature
Project description:ABSTRACT Owing to their low density, high porosity and unique micro-nanostructures, aerogels are attractive for application in various fields; however, they suffer from shrinkage and/or cracking during preparation, mechanical brittleness, low production efficiency and non-degradation. Herein, we introduce the concept of dynamic covalent polymer chemistry to produce a new class of aerogels—referred to as DCPAs. The resulting lightweight DCPAs have the potential to be prepared on a large scale and feature high porosity (90.7%–91.3%), large degrees of compression (80% strain) and bending (diametral deflection of 30 mm) without any cracks, as well as considerable tensile properties (an elongation with a break at 32.7%). In addition, the DCPAs showcase the emergent characteristics of weldability, repairability, degradability and closed-loop recyclability that are highly desirable for providing versatile material platforms, though hardly achieved by traditional aerogels. Taking advantage of their robust porous structures, we demonstrate the potential of DCPAs for applications in thermal insulation and emulsion separation. These findings reveal that the dynamic covalent bond strategy would be generalized for the production of a new generation of aerogels with customized features for functioning in the field of intelligent and sustainable materials. Dynamic covalent polymer aerogels (DCPAs) are constructed for the first time. It represents a new concept of aerogels with emerging characteristics of weldability, repairability, and closed-loop recyclability.
| S-EPMC9564194 | biostudies-literature
Project description:The development of sulfur-rich polymers derived from elementary sulfur provides an innovative approach to industrial waste valorization. Despite significant advancements in polymerization techniques and promising applications beyond traditional polymers, polysulfide networks are still primarily stabilized by diene crosslinkers, forming robust C-S bonds that hinder the degradation of sulfur-based polymers. In this study, the anionic ring-opening copolymerization of chemically homologous S8 and cyclic disulfides was explored to yield robust sulfur-rich copolymers with high molecular weight. The incorporation of polysulfide segments not only efficiently activated the crosslinked networks for excellent reprocessability and mechanical adaptability but also endowed the resulting copolymer with high optical transparency in the near-infrared region. More importantly, the dynamic disulfide crosslinking sites promoted the chemical closed-loop recyclability of the polysulfide networks via reversible S-S cleavage. This innovative inverse vulcanization strategy utilizing dynamic disulfide crosslinkers offers a promising pathway for the advanced applications and upcycling of high-performance sulfur-rich polymers.
| S-EPMC11447730 | biostudies-literature
Project description:Plastic recycling is a critical step toward improving waste management and achieving economic recycling. Here, a thermoset crosslinked by guanythiourea structure (GTUH network) is reported, that addresses the recycling issue of thermosets by serial hybridization of thiourea and guanidine urea. The dual dissociative dynamic exchange reaction of guanamine urea and thiourea, combined with non-covalent hydrogen bonding interactions, endows the network with rapid relaxation ability. GTUH networks, in particular, can be recycled through continuous extrusion processing due to multiple reversible mechanisms, as opposed to hot pressing alone. Even if reprocessed by hot pressing, only 5 min at 140 °C and 10 MPa are required. The oxidation enhancement mechanism of thiourea contributes to maintaining or even improving the mechanical properties of the recycled network. Moreover, the dynamic reactions of guanythiourea structure allow for closed-loop chemical recycling of the network. Research into recyclable carbon fiber-reinforced composites indicates promising potential applications for this material in the circular economy and resources.
| S-EPMC11672245 | biostudies-literature
Project description:In the state-of-the-art membrane industry, membranes have linear life cycles and are commonly disposed of by landfill or incineration, sacrificing their sustainability. To date, little or no thought is given in the design phase to the end-of-life management of membranes. For the first time, we have innovated high-performance sustainable membranes, which can be closed-loop recycled after long-term usage for water purification. By synergizing membrane technology and dynamic covalent chemistry, covalent adaptable networks (CANs) with thermally reversible Diels-Alder (DA) adducts were synthesized and employed to fabricate integrally skinned asymmetric membranes via the nonsolvent-induced phase separation technique. Due to the stable and reversible features of CAN, the closed-loop recyclable membranes exhibit excellent mechanical properties and thermal and chemical stabilities as well as separation performance, which are comparable to or even higher than the state-of-the-art nonrecyclable membranes. Moreover, the used membranes can be closed-loop recycled with consistent properties and separation performance by depolymerization to remove contaminants, followed by refabrication into new membranes through the dissociation and reformation of DA adducts. This study may fill in the gaps in closed-loop recycling of membranes and inspire the advancement of sustainable membranes for a green membrane industry.
| S-EPMC10104506 | biostudies-literature
Project description:Most plastics originate from limited petroleum reserves and cannot be effectively recycled at the end of their life cycle, making them a significant threat to the environment and human health. Closed-loop chemical recycling, by depolymerizing plastics into monomers that can be repolymerized, offers a promising solution for recycling otherwise wasted plastics. However, most current chemically recyclable polymers may only be prepared at the gram scale, and their depolymerization typically requires harsh conditions and high energy consumption. Herein, it reports less petroleum-dependent closed-loop recyclable silica-based nanocomposites that can be prepared on a large scale and have a fully reversible polymerization/depolymerization capability at room temperature, based on catalysis of free aminopropyl groups with the assistance of diethylamine or ethylenediamine. The nanocomposites show glass-like hardness yet plastic-like light weight and toughness, exhibiting the highest specific mechanical strength superior even to common materials such as poly(methyl methacrylate), glass, and ZrO2 ceramic, as well as demonstrating multifunctionality such as anti-fouling, low thermal conductivity, and flame retardancy. Meanwhile, these nanocomposites can be easily processed by various plastic-like scalable manufacturing methods, such as compression molding and 3D printing. These nanocomposites are expected to provide an alternative to petroleum-based plastics and contribute to a closed-loop materials economy.
| S-EPMC10724396 | biostudies-literature
Project description:Polyvinyl chloride (PVC) is the world's third-most widely manufactured thermoplastic, but has the lowest recycling rate. The development of PVC-like plastics that can be depolymerized back to monomer contributes to a circular plastic economy, but has not been accessed. Here, we develop a series of chemically recyclable plastics from the reversible copolymerization of cyclic anhydride with chloral. The copolymerization is highly efficient through the anionic or cationic mechanism under mild conditions, yielding polyesters with tunable structure and properties from multiple commercial monomers. Notably, these polyesters manifest mechanical properties comparable to PVC and polystyrene. Meanwhile, such polyesters are flame-retardant like PVC due to high chloride content. Of significance, these polyesters can be depolymerized back to starting monomers at high temperatures owing to the reversibility of the copolymerization, leading to a circular economy. Overall, the readily available monomers, simple synthesis, advantageous performance, and practical recyclability make the polymers promising for applications.
| S-EPMC11447067 | biostudies-literature
Project description:Thermosets-polymeric materials that adopt a permanent shape upon curing-have a key role in the modern plastics and rubber industries, comprising about 20 per cent of polymeric materials manufactured today, with a worldwide annual production of about 65 million tons1,2. The high density of crosslinks that gives thermosets their useful properties (for example, chemical and thermal resistance and tensile strength) comes at the expense of degradability and recyclability. Here, using the industrial thermoset polydicyclopentadiene as a model system, we show that when a small number of cleavable bonds are selectively installed within the strands of thermosets using a comonomer additive in otherwise traditional curing workflows, the resulting materials can display the same mechanical properties as the native material, but they can undergo triggered, mild degradation to yield soluble, recyclable products of controlled size and functionality. By contrast, installation of cleavable crosslinks, even at much higher loadings, does not produce degradable materials. These findings reveal that optimization of the cleavable bond location can be used as a design principle to achieve controlled thermoset degradation. Moreover, we introduce a class of recyclable thermosets poised for rapid deployment.
| S-EPMC7384294 | biostudies-literature
Project description:Although nanotoxicology has become a large research field, assessment of cytotoxicity is often reduced to analysis of one cell line only. Cytotoxicity of nanoparticles is complex and should, preferentially, be evaluated in several cell lines with different methods and on multiple nanoparticle batches. Here we report the toxicity of poly(alkyl cyanoacrylate) nanoparticles in 12 different cell lines after synthesizing and analyzing 19 different nanoparticle batches and report that large variations were obtained when using different cell lines or various toxicity assays. Surprisingly, we found that nanoparticles with intermediate degradation rates were less toxic than particles that were degraded faster or more slowly in a cell-free system. The toxicity did not vary significantly with either the three different combinations of polyethylene glycol surfactants or with particle size (range 100-200 nm). No acute pro- or anti-inflammatory activity on cells in whole blood was observed.
| S-EPMC5713421 | biostudies-literature