Potassium Poly(heptazine imide) Coupled with Ti3C2 MXene-Derived TiO2 as a Composite Photocatalyst for Efficient Pollutant Degradation
Ontology highlight
ABSTRACT:
SUBMITTER:
PROVIDER: S-EPMC10061626 | biostudies-literature | 2023 Mar
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Among external stimuli used to promote a chemical reaction, photocatalysis possesses a unique one-light. Photons are traceless reagents that provide an exclusive opportunity to alter chemoselectivity of the photocatalytic reaction varying the color of incident light. This strategy may be implemented by using a sensitizer capable to activate a specific reaction pathway depending on the excitation light. Herein, we use potassium poly(heptazine imide) (K-PHI), a type of carbon nitride, to generate selectively three different products from S-arylthioacetates simply varying the excitation light and otherwise identical conditions. Namely, arylchlorides are produced under UV/purple, sulfonyl chlorides with blue/white, and diaryldisulfides at green to red light. A combination of the negatively charged polyanion, highly positive potential of the valence band, presence of intraband states, ability to sensitize singlet oxygen, and multi-electron transfer is shown to enable this chromoselective conversion of thioacetates.
| S-EPMC8457082 | biostudies-literature
Project description:Visible light photocatalysis is a tool in synthetic chemistry that allows us to utilize the energy of photons via photoinduced electron transfer to promote diverse organic reactions. Herein, a heterogeneous transition metal-free material, a type of carbon nitride photocatalyst, potassium poly(heptazine imide), is employed to produce sulfonyl chlorides from arenediazonium salts under mild conditions (visible light irradiation, room temperature) with 50-95% yields. The method is suitable for the synthesis of both electron rich and electron deficient compounds, and it shows high tolerance toward different functional groups (halides, ester, nitro, cyano groups). Thus, a sustainable photocatalytic alternative to the Meerwein chlorosulfonylation reaction is offered.
| S-EPMC9955386 | biostudies-literature
Project description:Photoelectrochemical (PEC) water splitting is an appealing approach by which to convert solar energy into hydrogen fuel. Polymeric semiconductors have recently attracted intense interest of many scientists for PEC water splitting. The crystallinity of polymer films is regarded as the main factor that determines the conversion efficiency. Herein, potassium poly(heptazine) imide (K-PHI) films with improved crystallinity were in situ prepared on a conductive substrate as a photoanode for solar-driven water splitting. A remarkable photocurrent density of ca. 0.80 mA cm-2 was achieved under air mass 1.5 global illumination without the use of any sacrificial agent, a performance that is ca. 20 times higher than that of the photoanode in an amorphous state, and higher than those of other related polymeric photoanodes. The boosted performance can be attributed to improved charge transfer, which has been investigated using steady state and operando approaches. This work elucidates the pivotal importance of the crystallinity of conjugated polymer semiconductors for PEC water splitting and other advanced photocatalytic applications.
| S-EPMC9241972 | biostudies-literature
Project description:Titanium dioxide is a mainstream photocatalyst, but it still confronts great obstacles of poor visible light absorption and rapid recombination rate of photogenerated carriers. Herein, we describe the design of a highly active visible-light photocatalytic system of graphited carbon layers anchored V2O5/TiO2 heterojunctions derived from Ti3C2 MXene, which demonstrates about 4.58 and 2.79 times higher degradation activity of MB under visible light (λ > 420 nm) than pure V2O5 and TiO2-carbon. Combined with the characterization results, the formed V2O5/TiO2 heterojunction promotes the separation of photogenerated carriers, while the graphitized carbon derived from MXene acts as an electronic reservoir to enhance the absorption of visible light. The ESR results show that superoxide radicals and hydroxyl radicals are the main active species in the reaction system. Therefore, we propose a possible mechanism model to provide a feasible idea for the subsequent design of high-efficiency photocatalysts for environmental treatment.
| S-EPMC9147991 | biostudies-literature
Project description:Potassium poly (heptazine imide) (K-PHI), a crystalline two-dimensional carbon-nitride material, is an active photocatalyst for water splitting. The potassium ions in K-PHI can be exchanged with other ions to change the properties of the material and eventually to design the catalysts. We report here the electronic structures of several ion-exchanged salts of K-PHI (K, H, Au, Ru, and Mg) and their feasibility as water splitting photocatalysts, which were determined by density functional theory (DFT) calculations. The DFT results are complemented by experiments where the performances in the photocatalytic hydrogen evolution reaction (HER) were recorded. We show that due to its narrow band gap, Ru-PHI is not a suitable photocatalyst. The water oxidation potentials are straddled between the band edge potentials of H-PHI, Au-PHI, and Mg-PHI; thus, these are active photocatalysts for both the oxygen and hydrogen evolution reactions, whereas K-PHI is active only for the HER. The experimental data show that these are active HER photocatalysts, in agreement with the DFT results. Furthermore, Mg-PHI has shown remarkable performance in the HER, with a rate of 539 μmol/(h·g) and a quantum efficiency of 7.14% at 410 nm light irradiation, which could be due to activation of the water molecule upon adsorption, as predicted by our DFT calculations.
| S-EPMC8256424 | biostudies-literature
Project description:There has been increasing concern over water pollution, which poses a threat to human life and health. Absorption by low-cost absorbents is considered to be a cost-effective and efficient route. However, the non-reusability of absorbents greatly limits their applications. In this study, a novel vermiculite/TiO2 composite combining the inexpensive absorbent with the commonly used photocatalyst was firstly synthesized via the sol-gel method. On the one hand, the organic pollutants are absorbed by vermiculite and then decomposed through the photocatalysis process, enabling the next round of absorption and creating an absorption-decomposition reusable cycle. On the other hand, the modulation effect of optical and electronic structure on the prepared TiO2 photocatalyst by the vermiculite incorporation could significantly improve the photocatalytic activity and eventually enhance the aforementioned cyclic degradation capacity. The layer-structured vermiculite (Vt) supports a uniform coverage of TiO2 at an optimized ratio, providing an optimal adsorption environment and contact area between the photocatalyst and methylene blue (MB) molecules. Vt/TiO2 heterojunction is formed with Si-O-Ti bonding, at which electrons transfer from Vt to TiO2, enriching electron density in TiO2 and favoring its photocatalytic activity. Furthermore, the incorporation of Vt increases the light absorption of TiO2 in the visible range by narrowing the optical band gap to 1.98 eV, which could promote the generation of photo-excited carriers. In addition, PL measurements revealed that the carrier recombination is substantially suppressed, and the charge separation and migration are greatly enhanced by a factor of 3. As a result, the decomposition rate of MB is substantially increased 5.3-fold, which is ascribed to the synergistic effects of the elevated photocatalysis and the large absorption capacity governed by the chemisorption mechanism of the intra-particle diffusion. These results pave the way for composite design towards efficient, economical, and pragmatic water pollution treatment.
| S-EPMC10489128 | biostudies-literature
Project description:Diabetes is a major health challenge, and it is linked to a number of serious health issues, including cardiovascular disease (heart attack and stroke), diabetic nephropathy (kidney damage or failure), and birth defects. The detection of glucose has a direct and significant clinical importance in the management of diabetes. Herein, we demonstrate the application of in-situ synthesized Ti2C-TiO2 MXene nanocomposite for high throughput non-enzymatic electrochemical sensing of glucose. The nanocomposite was synthesized by controlled oxidation of Ti2C-MXene nanosheets using H2O2 at room temperature. The oxidation results in the opening up of Ti2C-MXene nanosheets and the formation of TiO2 nanocrystals on their surfaces as revealed in microscopic and spectroscopic analysis. Nanocomposite exhibited considerably high electrochemical response than parent Ti2C MXene, and hence utilized as a novel electrode material for enzyme-free sensitive and specific detection of glucose. Developed nanocomposite-based non-enzymatic glucose sensor (NEGS) displays a wide linearity range (0.1 µM-200 µM, R2 = 0.992), high sensitivity of 75.32 μA mM-1 cm-2, a low limit of detection (0.12 μM) and a rapid response time (~3s). NEGS has further shown a high level of repeatability and selectivity for glucose in serum spiked samples. The unveiled excellent sensing performance of NEGS is credited to synergistically improved electrochemical response of Ti2C MXene and TiO2 nanoparticles. All of these attributes highlight the potential of MXene nanocomposite as a next-generation NEGS for on the spot mass screening of diabetic patients.
| S-EPMC9371085 | biostudies-literature
Project description:Constructing faradaic electrode with superior desalination performance is important for expanding the applications of capacitive deionization (CDI). Herein, a simple one-step alkalized treatment for in situ synthesis of 1D TiO2 nanowires on the surface of 2D Ti3 C2 nanosheets, forming a Ti3 C2 -MXene partially derived hierarchical 1D/2D TiO2 /Ti3 C2 heterostructure as the cathode electrode is reported. Cross-linked TiO2 nanowires on the surface help avoid layer stacking while acting as the protective layer against contact of internal Ti3 C2 with dissolved oxygen in water. The inner Ti3 C2 MXene nanosheets cross over the TiO2 nanowires can provide abundant active adsorption sites and short ion/electron diffusion pathways. . Density functional theory calculations demonstrated that Ti3 C2 can consecutively inject electrons into TiO2 , indicating the high electrochemical activity of the TiO2 /Ti3 C2 . Benefiting from the 1D/2D hierarchical structure and synergistic effect of TiO2 and Ti3 C2 , TiO2 /Ti3 C2 heterostructure presents a favorable hybrid CDI performance, with a superior desalination capacity (75.62 mg g-1 ), fast salt adsorption rate (1.3 mg g-1 min-1 ), and satisfactory cycling stability, which is better than that of most published MXene-based electrodes. This study provides a feasible partial derivative strategy for construction of a hierarchical 1D/2D heterostructure to overcome the restrictions of 2D MXene nanosheets in CDI.
| S-EPMC9839853 | biostudies-literature
Project description:MXene Ti3C2/TiO2 hybrids were successfully synthesized through a simple calcination of F-terminated Ti3C2. The resultant Ti3C2/TiO2 composite photocatalysts retained a 2D multilayer structure like MXene Ti3C2, and TiO2 exhibited a truncated octahedral bipyramidal structure with exposed (001) facets under the participation of fluorine ions. The residual Ti3C2 could act as a co-catalyst to enhance the photocatalytic H2 production activity by capturing photogenerated electrons from TiO2 because of its electron reservoir feature and suitable Fermi level. The (101)-(001) surface heterojunction of the truncated octahedral bipyramidal TiO2 further accelerated the separation of photogenerated carriers. As a result, the Ti3C2/TiO2 hybrids with calcining F-terminated Ti3C2 exhibited photocatalytic hydrogen production that is twofold higher than that of Ti3C2/TiO2 hybrids with calcining OH-terminated Ti3C2. This work presented a new strategy to prepare MXene Ti3C2/TiO2 hybrids for photoconversion applications.
| S-EPMC9418716 | biostudies-literature
Project description:Tissue engineered cardiac patches have great potential as a therapeutic treatment for myocardial infarction (MI). However, for successful integration with the native tissue and proper function of the cells comprising the patch, it is crucial for these patches to mimic the ordered structure of the native extracellular matrix and the electroconductivity of the human heart. In this study, a new composite construct that can provide both conductive and topographical cues for human induced pluripotent stem cell derived cardiomyocytes (iCMs) is developed for cardiac tissue engineering applications. The constructs are fabricated by 3D printing conductive titanium carbide (Ti3C2Tx) MXene in pre-designed patterns on polyethylene glycol (PEG) hydrogels, using aerosol jet printing, at a cell-level resolution and then seeded with iCMs and cultured for one week with no signs of cytotoxicity. The results presented in this work illustrate the vital role of 3D-printed Ti3C2Tx MXene on aligning iCMs with a significant increase in MYH7, SERCA2, and TNNT2 expressions, and with an improved synchronous beating as well as conduction velocity. This study demonstrates that 3D printed Ti3C2Tx MXene can potentially be used to create physiologically relevant cardiac patches for the treatment of MI. STATEMENT OF SIGNIFICANCE: As cardiovascular diseases and specifically myocardial infarction (MI) continue to be the leading cause of death worldwide, it is critical that new clinical interventions be developed. Tissue engineered cardiac patches have shown significant potential as clinical therapeutics to promote recovery following MI. Unfortunately, current constructs lack the ordered structure and electroconductivity of native human heart. In this study, we engineered a composite construct that can provide both conductive and topographical cues for human induced pluripotent stem cell derived cardiomyocytes. By 3D printing conductive Ti3C2Tx MXene in pre-designed patterns on polyethylene glycol hydrogels, using aerosol jet printing, at a cell-level resolution, we developed tissue engineered patches that have the potential for providing a new clinical therapeutic to combat cardiovascular disease.
| S-EPMC8213874 | biostudies-literature