Dataset Information

Nanoporous Amorphous Carbon with Exceptional Ultra-High Strength.

ABSTRACT: Nanoporous materials show a promising combination of mechanical properties in terms of their relative density; while there are numerous studies based on metallic nanoporous materials, here we focus on amorphous carbon with a bicontinuous nanoporous structure as an alternative to control the mechanical properties for the function of filament composition.Using atomistic simulations, we study the mechanical response of nanoporous amorphous carbon with 50% porosity, with sp3 content ranging from 10% to 50%. Our results show an unusually high strength between 10 and 20 GPa as a function of the %sp3 content. We present an analytical analysis derived from the Gibson-Ashby model for porous solids, and from the He and Thorpe theory for covalent solids to describe Young's modulus and yield strength scaling laws extremely well, revealing also that the high strength is mainly due to the presence of sp3 bonding. Alternatively, we also find two distinct fracture modes: for low %sp3 samples, we observe a ductile-type behavior, while high %sp3 leads to brittle-type behavior due to high high shear strain clusters driving the carbon bond breaking that finally promotes the filament fracture. All in all, nanoporous amorphous carbon with bicontinuous structure is presented as a lightweight material with a tunable elasto-plastic response in terms of porosity and sp3 bonding, resulting in a material with a broad range of possible combinations of mechanical properties.

SUBMITTER: Castillo-Castro D

PROVIDER: S-EPMC10142945 | biostudies-literature | 2023 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Nanoporous Amorphous Carbon with Exceptional Ultra-High Strength.

Castillo-Castro Daniel D Correa Felipe F Aparicio Emiliano E Amigo Nicolás N Prada Alejandro A Figueroa Juan J González Rafael I RI Bringa Eduardo E Valencia Felipe J FJ

Nanomaterials (Basel, Switzerland) 20230421 8

Nanoporous materials show a promising combination of mechanical properties in terms of their relative density; while there are numerous studies based on metallic nanoporous materials, here we focus on amorphous carbon with a bicontinuous nanoporous structure as an alternative to control the mechanical properties for the function of filament composition.Using atomistic simulations, we study the mechanical response of nanoporous amorphous carbon with 50% porosity, with sp3 content ranging from 10% ...[more]

PMID: 37111014

Similar Datasets

Project description:High power density electronics are severely limited by current thermal management solutions which are unable to dissipate the necessary heat flux while maintaining safe junction temperatures for reliable operation. We designed, fabricated, and experimentally characterized a microfluidic device for ultra-high heat flux dissipation using evaporation from a nanoporous silicon membrane. With ~100 nm diameter pores, the membrane can generate high capillary pressure even with low surface tension fluids such as pentane and R245fa. The suspended ultra-thin membrane structure facilitates efficient liquid transport with minimal viscous pressure losses. We fabricated the membrane in silicon using interference lithography and reactive ion etching and then bonded it to a high permeability silicon microchannel array to create a biporous wick which achieves high capillary pressure with enhanced permeability. The back side consisted of a thin film platinum heater and resistive temperature sensors to emulate the heat dissipation in transistors and measure the temperature, respectively. We experimentally characterized the devices in pure vapor-ambient conditions in an environmental chamber. Accordingly, we demonstrated heat fluxes of 665 ± 74 W/cm2 using pentane over an area of 0.172 mm × 10 mm with a temperature rise of 28.5 ± 1.8 K from the heated substrate to ambient vapor. This heat flux, which is normalized by the evaporation area, is the highest reported to date in the pure evaporation regime, that is, without nucleate boiling. The experimental results are in good agreement with a high fidelity model which captures heat conduction in the suspended membrane structure as well as non-equilibrium and sub-continuum effects at the liquid-vapor interface. This work suggests that evaporative membrane-based approaches can be promising towards realizing an efficient, high flux thermal management strategy over large areas for high-performance electronics.

Dataset Information

Nanoporous Amorphous Carbon with Exceptional Ultra-High Strength.

Publications

Nanoporous Amorphous Carbon with Exceptional Ultra-High Strength.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets