Dataset Information

Experiment dataset of dynamic properties of damper material derived from automotive spare parts as passive control devices for retrofitting existing buildings.

ABSTRACT: The data collection provides two clusters: rubber materials and dampers as passive energy dissipation devices that are selected from existing systems in automotive spare parts, namely rubber from engine mounting rubber, shock absorbers, and engine mounting rubber (EMR). Variable depending on the brand, number, and size of the rubber used by the manufacturer. Data on EMR rubber materials, such as ultimate tensile strength, axial elongation, hardness, and density. Data for EMR as a system, including data from static and dynamic tests. The parameters measured are stiffness and damping ratio. The area and shape of the hysteresis curve are used to determine the damping ratio. The data presented in the article will allow researchers to validate the dynamic models for several designs of dampers, such as a damper with a single EMR and a damper with a group of EMR systems.

SUBMITTER: Nurchasanah Y

PROVIDER: S-EPMC10164761 | biostudies-literature | 2023 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Experiment dataset of dynamic properties of damper material derived from automotive spare parts as passive control devices for retrofitting existing buildings.

Nurchasanah Yenny Y Suhendro Bambang B Satyarno Iman I

Data in brief 20230420

The data collection provides two clusters: rubber materials and dampers as passive energy dissipation devices that are selected from existing systems in automotive spare parts, namely rubber from engine mounting rubber, shock absorbers, and engine mounting rubber (EMR). Variable depending on the brand, number, and size of the rubber used by the manufacturer. Data on EMR rubber materials, such as ultimate tensile strength, axial elongation, hardness, and density. Data for EMR as a system, includi ...[more]

PMID: 37168597

Similar Datasets

Project description:The automotive sector is actively pursuing a lightweighting strategy as a means to urgently decrease greenhouse gas emissions, which are a significant driver of climate change. The development of lightweight composite structures has been identified as crucial for enhancing part performance while mitigating negative environmental impacts and adopting energy-efficient manufacturing methods. This comprehensive study aimed to decrease the main reinforcement content of talc in commercial compounds while integrating graphene derived from waste polypropylene (PP) grown on talc and graphene nanoplatelet obtained from waste tires by upcycling processes into the PP compound. The entire value chain of interior automotive part production, from compound development and scaling up with a high-shear mixer, to injection molding of the part and performance tests, was investigated with a focus on sustainability considerations. The successful integration of 4 wt % micron talc, together with 1 wt % graphene nanoparticles and 1 wt % hybrid additive into the blended HomoPP/CopoPP matrix resulted in a 10% weight reduction compared to the conventional part. Moreover, significant improvements in flexural and tensile strength were observed, with enhancements of 52 and 38%, respectively. The uniform dispersion of additives and improved interfacial adhesion between the PP matrix and additives facilitated efficient stress transfer, contributing to enhanced mechanical properties. Furthermore, a systematic life cycle assessment study demonstrated the positive impact of waste PP incorporation on CO2 reduction, achieving a remarkable 95% reduction compared to virgin PP. The developed compound also demonstrated favorable processability and flow properties, supporting its potential for mass production. Overall, this study presents a sustainable and effective approach for lightweight automotive interior part production using a synergistically designed PP compound meeting the requirements of the automotive industry.

Project description:To investigate passive vaping due to sub-ohm electronic cigarettes (e-cigs), aerosol number size distribution measurements (6 nm-10 µm) were performed during volunteer-vaping sessions. E-liquids, with vegetable glycerin (VG) and propylene glycol (PG), with a VG/PG ratio of 50/50 (with nicotine) and 80/20 (without nicotine), were vaped with a double-coil, single aerosol exit hole at 25-80 W electric power, corresponding to 130-365 kW m-2 heat fluxes and with an octa-coil, four aerosol exit holes atomizers, at 50-150 W electric power, corresponding to 133-398 kW m-2 heat fluxes. At the lowest heat flux, lower particle number concentrations (NTot) were observed for the nicotine-liquid than for the nicotine-free liquid, also due to its higher content of PG, more volatile than VG. For the octa-coil atomizer, at 265 and 398 kW m-2, NTot decreased below the first-generation e-cig, whereas volume concentrations greatly increased, due to the formation of super micron droplets. Higher volume concentrations were observed for the 80/20 VG/PG liquid, because of VG vaporization and of its decomposition products, greater than for PG. For the double coil atomizer, increasing the electric power from 40 W (208 kW m-2) to 80 W (365 kW m-2) possibly led to a critical heat flow condition, causing a reduction of the number concentrations for the VG/PG 50/50 liquid, an increase for the 80/20 VG/PG liquid and a decrease of the volume concentrations for both of them. Coherently, the main mode was at about 0.1 µm on both metrics for both liquids. For the other tests, two main modes (1 and 2 µm) were observed in the volume size distributions, the latter becoming wider at 100 and 150 W (265 and 398 kW m-2), suggesting the increased emission of light condensable decomposition products. The lower aerosol emissions observed at 150 W than at 100 W suggest the formation of gas-phase decomposition products. The observation of low-count high-volume aerosols addresses the relevance of the volume metric upon measuring the second-hand concentration of the aerosols released by sub-ohm e-cigarettes.

Dataset Information

Experiment dataset of dynamic properties of damper material derived from automotive spare parts as passive control devices for retrofitting existing buildings.

Publications

Experiment dataset of dynamic properties of damper material derived from automotive spare parts as passive control devices for retrofitting existing buildings.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets