Noise Cancellation Effects in Integrated Photonics with Wilkinson Power Dividers
Ontology highlight
ABSTRACT:
SUBMITTER:
PROVIDER: S-EPMC10197118 | biostudies-literature | 2023 Apr
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Biological measurements are often contaminated with large amounts of non-stationary noise which require effective noise reduction techniques. We present a new real-time deep learning algorithm which produces adaptively a signal opposing the noise so that destructive interference occurs. As a proof of concept, we demonstrate the algorithm's performance by reducing electromyogram noise in electroencephalograms with the usage of a custom, flexible, 3D-printed, compound electrode. With this setup, an average of 4dB and a maximum of 10dB improvement of the signal-to-noise ratio of the EEG was achieved by removing wide band muscle noise. This concept has the potential to not only adaptively improve the signal-to-noise ratio of EEG but can be applied to a wide range of biological, industrial and consumer applications such as industrial sensing or noise cancelling headphones.
| S-EPMC9678292 | biostudies-literature
Project description:Mechanically stretchable photonics provides a new geometric degree of freedom for photonic system design and foresees applications ranging from artificial skins to soft wearable electronics. Here we describe the design and experimental realization of the first single-mode stretchable photonic devices. These devices, made of chalcogenide glass and epoxy polymer materials, are monolithically integrated on elastomer substrates. To impart mechanical stretching capability to devices built using these intrinsically brittle materials, our design strategy involves local substrate stiffening to minimize shape deformation of critical photonic components, and interconnecting optical waveguides assuming a meandering Euler spiral geometry to mitigate radiative optical loss. Devices fabricated following such design can sustain 41% nominal tensile strain and 3000 stretching cycles without measurable degradation in optical performance. In addition, we present a rigorous analytical model to quantitatively predict stress-optical coupling behavior in waveguide devices of arbitrary geometry without using a single fitting parameter.
| S-EPMC6060064 | biostudies-literature
Project description:Semiconductor quantum dots are crucial parts of the photonic quantum technology toolbox because they show excellent single-photon emission properties in addition to their potential as solid-state qubits. Recently, there has been an increasing effort to deterministically integrate single semiconductor quantum dots into complex photonic circuits. Despite rapid progress in the field, it remains challenging to manipulate the optical properties of waveguide-integrated quantum emitters in a deterministic, reversible, and nonintrusive manner. Here we demonstrate a new class of hybrid quantum photonic circuits combining III-V semiconductors, silicon nitride, and piezoelectric crystals. Using a combination of bottom-up, top-down, and nanomanipulation techniques, we realize strain tuning of a selected, waveguide-integrated, quantum emitter and a planar integrated optical resonator. Our findings are an important step toward realizing reconfigurable quantum-integrated photonics, with full control over the quantum sources and the photonic circuit.
| S-EPMC6477803 | biostudies-literature
Project description:Quantum dots are both excellent single-photon sources and hosts for single spins. This combination enables the deterministic generation of Raman-photons-bandwidth-matched to an atomic quantum-memory-and the generation of photon cluster states, a resource in quantum communication and measurement-based quantum computing. GaAs quantum dots in AlGaAs can be matched in frequency to a rubidium-based photon memory, and have potentially improved electron spin coherence compared to the widely used InGaAs quantum dots. However, their charge stability and optical linewidths are typically much worse than for their InGaAs counterparts. Here, we embed GaAs quantum dots into an n-i-p-diode specially designed for low-temperature operation. We demonstrate ultra-low noise behaviour: charge control via Coulomb blockade, close-to lifetime-limited linewidths, and no blinking. We observe high-fidelity optical electron-spin initialisation and long electron-spin lifetimes for these quantum dots. Our work establishes a materials platform for low-noise quantum photonics close to the red part of the spectrum.
| S-EPMC7506537 | biostudies-literature
Project description:Compact power splitters are essential components in integrated optics. While 1 × 2 power splitters with uniform splitting are widely used, a 1 × N splitter with arbitrary number N of ports and arbitrary splitting ratio is yet to be demonstrated. In this work we address this problem. We fabricate and characterise 1 × N integrated power splitters that provide fully arbitrary splitting ratios. The core of our design is represented by an array of N non-equally spaced waveguides fabricated on a silicon nitride-on-insulator wafer. Any arbitrary 1 × N splitting ratio can be achieved by properly setting the array length and the dimension of the (N-1) nano-gaps between the adjacent waveguides. Most importantly, at variance with state-of-the-art solutions, our devices can be designed for arbitrary splitting of higher-order modes. In this manuscript we provide the first experimental demonstration of 1 × N arbitrary splitting ratio for both the fundamental modes (TE00 and TM00) and the TE01 mode, here up to N = 5 ports. With a footprint of 20 μm2/port, a bandwidth up to 70 nm and an excess losses <0.2 dB, our devices set a new benchmark for optical power splitters in both standard single-mode photonics as well as in the emerging integrated multimode photonics technology, and may therefore boost key photonic applications, from optimal power distribution and equalization up to signal processing operations.
| S-EPMC11501587 | biostudies-literature
Project description:Coherent optics has profoundly impacted diverse applications ranging from communications, LiDAR to quantum computations. However, developing coherent systems in integrated photonics comes at great expense in hardware integration and energy efficiency. Here we demonstrate a high-coherence parallelization strategy for advanced integrated coherent systems at minimal cost. By using a self-injection locked microcomb to injection lock distributed feedback lasers, we achieve a record high on-chip gain of 60 dB with no degradation in coherence. This strategy enables highly coherent channels with linewidths down to 10 Hz and power over 20 dBm. The overall electrical-to-optical efficiency reaches 19%, comparable to that of advanced semiconductor lasers. This method supports a silicon photonic communication link with an unprecedented data rate beyond 60 Tbit/s and reduces phase-related DSP consumption by 99.99999% compared to traditional III-V laser pump schemes. This work paves the way for realizing scalable, high-performance coherent integrated photonic systems, potentially benefiting numerous applications.
| S-EPMC11387407 | biostudies-literature
Project description:A variety of topological Hamiltonians have been demonstrated in photonic platforms, leading to fundamental discoveries and enhanced robustness in applications such as lasing, sensing, and quantum technologies. To date, each topological photonic platform implements a specific type of Hamiltonian with inexistent or limited reconfigurability. Here, we propose and demonstrate different topological models by using the same reprogrammable integrated photonics platform, consisting of a hexagonal mesh of silicon Mach-Zehnder interferometers with phase shifters. We specifically demonstrate a one-dimensional Su-Schrieffer-Heeger Hamiltonian supporting a localized topological edge mode and a higher-order topological insulator based on a two-dimensional breathing Kagome Hamiltonian with three corner states. These results highlight a nearly universal platform for topological models that may fast-track research progress toward applications of topological photonics and other coupled systems.
| S-EPMC10799881 | biostudies-literature
Project description:We present a long-range fiber-optic environmental deformation sensor based on active phase noise cancellation (PNC) in metrological frequency dissemination. PNC sensing exploits recordings of a compensation frequency that is commonly discarded. Without the need for dedicated measurement devices, it operates synchronously with metrological services, suggesting that existing phase-stabilized metrological networks can be co-used effortlessly as environmental sensors. The compatibility of PNC sensing with inline amplification enables the interrogation of cables with lengths beyond 1000 km, making it a potential contributor to earthquake detection and early warning in the oceans. Using spectral-element wavefield simulations that accurately account for complex cable geometry, we compare observed and computed recordings of the compensation frequency for a magnitude 3.9 earthquake in south-eastern France and a 123 km fiber link between Bern and Basel, Switzerland. The match in both phase and amplitude indicates that PNC sensing can be used quantitatively, for example, in earthquake detection and characterization.
| S-EPMC10460440 | biostudies-literature
Project description:Scaling up linear-optics quantum computing will require multi-photon gates which are compact, phase-stable, exhibit excellent quantum interference, and have success heralded by the detection of ancillary photons. We investigate the design, fabrication and characterisation of the optimal known gate scheme which meets these requirements: the Knill controlled-Z gate, implemented in integrated laser-written waveguide arrays. We show device performance to be less sensitive to phase variations in the circuit than to small deviations in the coupler reflectivity, which are expected given the tolerance values of the fabrication method. The mode fidelity is also shown to be less sensitive to reflectivity and phase errors than the process fidelity. Our best device achieves a fidelity of 0.931 ± 0.001 with the ideal 4 × 4 unitary circuit and a process fidelity of 0.680 ± 0.005 with the ideal computational-basis process.
| S-EPMC4901290 | biostudies-other
Project description:Integrated photonic devices based on Si3N4 waveguides allow for the exploitation of nonlinear frequency conversion, exhibit low propagation loss, and have led to advances in compact atomic clocks, ultrafast ranging, and spectroscopy. Yet, the lack of Pockels effect presents a major challenge to achieve high-speed modulation of Si3N4. Here, microwave-frequency acousto-optic modulation is realized by exciting high-overtone bulk acoustic wave resonances (HBAR) in the photonic stack. Although HBAR is ubiquitously used in modern communication and superconducting circuits, this is the first time it has been incorporated on a photonic integrated chip. The tight vertical acoustic confinement releases the lateral design of freedom, and enables negligible cross-talk and preserving low optical loss. This hybrid HBAR nanophotonic platform can find immediate applications in topological photonics with synthetic dimensions, compact opto-electronic oscillators, and microwave-to-optical converters. As an application, a Si3N4-based optical isolator is demonstrated by spatiotemporal modulation, with over 17 dB isolation achieved.
| S-EPMC7299988 | biostudies-literature