Efficient CO2 Reduction to Formate on CsPbI3 Nanocrystals Wrapped with Reduced Graphene Oxide.
Ontology highlight
ABSTRACT:
SUBMITTER: Hoang MT
PROVIDER: S-EPMC10310658 | biostudies-literature | 2023 Jun
REPOSITORIES: biostudies-literature
Publications
Efficient CO<sub>2</sub> Reduction to Formate on CsPbI<sub>3</sub> Nanocrystals Wrapped with Reduced Graphene Oxide.
Hoang Minh Tam MT Han Chen C Ma Zhipeng Z Mao Xin X Yang Yang Y Madani Sepideh Sadat SS Shaw Paul P Yang Yongchao Y Peng Lingyi L Toe Cui Ying CY Pan Jian J Amal Rose R Du Aijun A Tesfamichael Tuquabo T Han Zhaojun Z Wang Hongxia H
Nano-micro letters 20230629 1
Similar Datasets
Project description:The all-inorganic perovskite nanocrystals are currently in the research spotlight owing to their physical stability and superior optical properties-these features make them interesting for optoelectronic and photovoltaic applications. Here, we report on the observation of highly efficient carrier multiplication in colloidal CsPbI3 nanocrystals prepared by a hot-injection method. The carrier multiplication process counteracts thermalization of hot carriers and as such provides the potential to increase the conversion efficiency of solar cells. We demonstrate that carrier multiplication commences at the threshold excitation energy near the energy conservation limit of twice the band gap, and has step-like characteristics with an extremely high quantum yield of up to 98%. Using ultrahigh temporal resolution, we show that carrier multiplication induces a longer build-up of the free carrier concentration, thus providing important insights into the physical mechanism responsible for this phenomenon. The evidence is obtained using three independent experimental approaches, and is conclusive.
| S-EPMC6180104 | biostudies-literature
Project description:N-doped (NrGO) and non-doped (rGO) graphenic materials are prepared by oxidation and further thermal treatment under ammonia and inert atmospheres, respectively, of natural graphites of different particle sizes. An extensive characterization of graphene materials points out that the physical properties of synthesized materials, as well as the nitrogen species introduced, depend on the particle size of the starting graphite, the reduction atmospheres, and the temperature conditions used during the exfoliation treatment. These findings indicate that it is possible to tailor properties of non-doped and N-doped reduced graphene oxide, such as the number of layers, surface area, and nitrogen content, by using a simple strategy based on selecting adequate graphite sizes and convenient experimental conditions during thermal exfoliation. Additionally, the graphenic materials are successfully applied as electrocatalysts for the demanding oxygen reduction reaction (ORR). Nitrogen doping together with the starting graphite of smaller particle size (NrGO325-4) resulted in a more efficient ORR electrocatalyst with more positive onset potentials (Eonset = 0.82 V versus RHE), superior diffusion-limiting current density (jL, 0.26V, 1600rpm = -4.05 mA cm-2), and selectivity to the direct four-electron pathway. Moreover, all NrGOm-4 show high tolerance to methanol poisoning in comparison with the state-of-the-art ORR electrocatalyst Pt/C and good stability.
| S-EPMC6956339 | biostudies-literature
Project description:In this study, we proposed a novel CoIn2S4/reduced graphene oxide (CoIn2S4/rGO) composite anode using a hydrothermal method. By introducing electronic-conductive reduced graphene oxide (rGO) to buffer the extreme volume expansion of CoIn2S4, we prevented its polysulfide dissolution during the lithiation/de-lithiation processes. After 100 cycles, the pristine CoIn2S4 electrode demonstrated poor cycle performance of only 120 mAh/g at a current density of 0.1 A/g. However, the composition-optimized CoIn2S4/rGO composite anode demonstrated a reversible capacity of 580 mAh/g for 100 cycles, which was an improvement of 4.83 times. In addition, the ex situ XRD measurements of the CoIn2S4/rGO electrode were conducted to determine the reaction mechanism and electrochemical behavior. These results suggest that the as-synthesized CoIn2S4/rGO composite anode is a promising anode material for lithium ion batteries.
| S-EPMC9781618 | biostudies-literature
Project description:Through electrostatic interaction and high-temperature reduction methods, rGO was closely coated onto the surface of TiO2 nanotubes. Even at a high temperature of 700 °C, the nanotube morphology of TiO2 (anatase) was preserved because of the assistance of rGO, which provides a framework that prevents the tubes from breaking into particles and undergoing a phase transformation. The rGO/TiO2 nanotubes deliver a high capacity (263 mAh g-1 at the end of 100 cycles at 0.1 A g-1), excellent rate performance (151 mAh g-1 at 2 A g-1 and 102 mAh g-1 at 5 A g-1), and good cycle stability (206 mAh g-1 after 500 cycles at 0.5 A g-1). These characteristics arise from the GO/TiO2 nanotubes' advanced structure. First, the closely coated rGO and Ti3+ in the tubes give rise to a high electro-conductivity of the nanotubes. Additionally, the Li+ ions can rapidly transfer into the electrode via the nanotubes' empty inner diameter and short tube wall.
| S-EPMC5093559 | biostudies-literature
Project description:The reduced graphene oxide/iron oxide (rGO/Fe2O3) and reduced graphene oxide/cobalt oxide (rGO/Co3O4) composite anodes have been successfully prepared through a simple and scalable ball-milling synthesis. The substantial interaction of Fe2O3 and Co3O4 with the rGO matrix strengthens the electronic conductivity and limits the volume variation during cycling in the rGO/Fe2O3 and rGO/Co3O4 composites because reduced graphene oxide (rGO) helps the metal oxides (MOs) to attain a more efficient diffusion of Li-ions and leads to high specific capacities. As anode materials for LIBs, the rGO/Fe2O3 and rGO/Co3O4 composites demonstrate overall superb electrochemical properties, especially rGO/Fe2O3T-5 and rGO/Co3O4T-5, showcasing higher reversible capacities of 1021 and 773 mAhg-1 after 100 cycles at 100 mAg-1, accompanied by the significant rate performance. Because of their superior electrochemical efficiency, high capacity and low cost, the rGO/Fe2O3 and rGO/Co3O4 composites made by ball milling could be outstanding anode materials for LIBs. Due to the excellent electrochemical performance, the rGO/Fe2O3 and rGO/Co3O4 composites prepared via ball milling could be promising anode materials with a high capacity and low cost for LIBs. The findings may provide shed some light on how other metal oxides wrapped by rGO can be prepared for future applications.
| S-EPMC9865346 | biostudies-literature
Project description:Magnetic metal nanocrystals tend to be advanced microwave absorption substances as they possess simultaneous dielectric and magnetic losses. In this study, the metallic cobalt (Co) nanocrystals with a pine needle-like nanostructure constructed by one-dimensional Co nanorods have been successfully prepared through the polyol approach. By regulating the amount of reduced graphene oxide (rGO), rGO/Co nanocomposites with different mass ratios were acquired. Experimental results demonstrate that the rGO/Co nanocomposites display excellent microwave attenuation capacity. The minimum reflection loss value can reach -57.8 dB at 12.43 GHz with a filler loading of 20 wt% at 1.8 mm. Moreover, the effective absorption bandwidth covers the frequency range of 4.2-15.5 GHz with an integrated thickness of 1.5-4.0 mm. The main absorption mechanisms include dielectric loss caused by dipole and interfacial polarization and magnetic loss arising from ferromagnetic resonance and eddy current loss. In addition, the special nanostructure effect is also beneficial to improve the EM wave absorption performance.
| S-EPMC9041652 | biostudies-literature
Project description:Reduced graphene oxide (RGO) decorated with octahedral NiS2/NiS nanocrystals were fabricated via a facile synthetic strategy. By appropriate adjustment of the weight ratio of GO and NiS2/NiS nanocrystals, RGO-NiS2/NiS nanocomposites with an excellent microwave absorption performance were achieved. As expected, RGO-NiS2/NiS nanocomposites in a polyvinylidene fluoride (PVDF) matrix with different mass fractions (5, 10, 15, 20 wt%) possess effective absorption in the high frequency range with a thin thickness (1.5 mm) compared with those of octahedral NiS2/NiS nanocrystals. It was revealed that RGO-NiS2/NiS nanocomposites with a GO : NiS2/NiS weight ratio of 1 : 4 exhibited the most prominent microwave absorption property. The optimal effective frequency bandwidth of this sample covers 4.32 GHz at a thin coating layer of 1.5 mm (15 wt%). The corresponding reflection loss value can reach -32.2 dB at 14.32 GHz. Moreover, the fundamental attenuation mechanisms are also discussed in detail.
| S-EPMC9060777 | biostudies-literature
Project description:The electrochemical reduction of CO2 to useful chemicals and fuels has garnered a keen and broad interest. Herein, we report a unique nanocomposite consisting of Cu nanoparticles (NPs) and reduced graphene oxide (rGO) supported on a Cu substrate with a high catalytic activity for CO2 reduction. The nanocomposite was optimized in terms of the composition of Cu NPs and rGO as well as the overall amount. A gas chromatograph was employed to analyze the gaseous products, whereas a chemical oxygen demand (COD) method was proposed and utilized to quantify the overall liquid products. The optimized nanocomposite could effectively reduce CO2 to CO, HCOOH and CH4 with a Faradaic efficiency (FE) of 76.6% at -0.4 V (vs. RHE) in a CO2 saturated NaHCO3 solution. The remarkable catalytic activity, high FE, and excellent stability make this Cu-rGO nanocomposite promising for the electrochemical reduction of CO2 to value-added products to address the pressing environmental and energy challenges.
| S-EPMC5466611 | biostudies-literature
Project description:Metal nanowires exhibit unusually high catalytic activity towards oxygen reduction reaction (ORR) due to their inherent electronic structures. However, controllable synthesis of stable nanowires still remains as a daunting challenge. Herein, we report the in situ synthesis of silver nanowires (AgNWs) over boron doped graphene sheets (BG) and demonstrated its efficient electrocatalytic activity towards ORR for the first time. The electrocatalytic ORR efficacy of BG-AgNW is studied using various voltammetric techniques. The BG wrapped AgNWs shows excellent ORR activity, with very high onset potential and current density and it followed four electron transfer mechanism with high methanol tolerance and stability towards ORR. The results are comparable to the commercially available 20% Pt/C in terms of performance.
| S-EPMC5150258 | biostudies-literature
Project description:Wearable piezoresistive sensors are being developed as electronic skins (E-skin) for broad applications in human physiological monitoring and soft robotics. Tactile sensors with sufficient sensitivities, durability, and large dynamic ranges are required to replicate this critical component of the somatosensory system. Multiple micro/nanostructures, materials, and sensing modalities have been reported to address this need. However, a trade-off arises between device performance and device complexity. Inspired by the microstructure of the spinosum at the dermo epidermal junction in skin, a low-cost, scalable, and high-performance piezoresistive sensor is developed with high sensitivity (0.144 kPa-1 ), extensive sensing range ( 0.1-15 kPa), fast response time (less than 150 ms), and excellent long-term stability (over 1000 cycles). Furthermore, the piezoresistive functionality of the device is realized via a flexible transparent electrode (FTE) using a highly stable reduced graphene oxide self-wrapped copper nanowire network. The developed nanowire-based spinosum microstructured FTEs are amenable to wearable electronics applications.
| S-EPMC8852346 | biostudies-literature