In Situ Iodide Passivation Toward Efficient CsPbI3 Perovskite Quantum Dot Solar Cells.
Ontology highlight
ABSTRACT:
SUBMITTER: Shi J
PROVIDER: S-EPMC10310659 | biostudies-literature | 2023 Jun
REPOSITORIES: biostudies-literature
Publications
In Situ Iodide Passivation Toward Efficient CsPbI<sub>3</sub> Perovskite Quantum Dot Solar Cells.
Shi Junwei J Cohen-Kleinstein Ben B Zhang Xuliang X Zhao Chenyu C Zhang Yong Y Ling Xufeng X Guo Junjun J Ko Doo-Hyun DH Xu Baomin B Yuan Jianyu J Ma Wanli W
Nano-micro letters 20230629 1
Similar Datasets
Project description:The migration of mobile ionic halide vacancies is usually considered detrimental to the performance and stability of perovskite optoelectronic devices. Taking advantage of this intrinsic feature, we fabricated a CsPbI3 perovskite quantum dot (PQD)-based write-once-read-many-times (WORM) memory device with a simple sandwich structure that demonstrates intrinsic ternary states with a high ON/OFF ratio of 103:102:1 and a long retention time of 104 s. Through electrochemical impedance spectroscopy, we proved that the resistive switching is achieved by the migration of mobile iodine vacancies (VIs) under an electric field to form conductive filaments (CFs). Using in situ conductive atomic force microscopy, we further revealed that the multilevel property arises from the different activation energies for VIs to migrate at grain boundaries and grain interiors, resulting in two distinct pathways for CFs to grow. Our work highlights the potential of CsPbI3 PQD-based WORM devices, showcasing intrinsic multilevel properties achieved in a simple device structure by rationally controlling the drift of ionic defects.
| S-EPMC11299139 | biostudies-literature
Project description:Perovskite CsPbI3 quantum dots (QDs) were synthesized as a hole-transporting layer (HTL) of a planar perovskite solar cell (PSC). By using the Octam solution during the ligand engineering, CsPbI3 QDs exhibits a denser grain and a larger grain size due to the short-chain ligands of Octam. In addition, CsPbI3 QDs with the Octam solution showed a smooth and uniform surface on MAPbI3 film, indicating the QDs improved the microstructure of the MAPbI3 perovskite film. As a result, the PSC with CsPbI3 QDs as an HTL has the optimal open-circuit voltage as 1.09 V, the short-circuit current as 20.5 mA/cm2, and the fill factor (FF) as 75.7%, and the power conversion efficiency (PCE) as 17.0%. Hence, it is inferred that introducing QDs as a HTL via the ligand engineering can effectively improve the device performance of the PSC.
| S-EPMC9788023 | biostudies-literature
Project description:Among various all-inorganic halide perovskites exhibiting better stability than organic-inorganic halide perovskites, α-CsPbI3 with the most suitable band gap for tandem solar cell application faces an issue of phase instability under ambient conditions. We discovered that a small amount of two-dimensional (2D) EDAPbI4 perovskite containing the ethylenediamine (EDA) cation stabilizes the α-CsPbI3 to avoid the undesirable formation of the nonperovskite δ phase. Moreover, not only the 2D perovskite of EDAPbI4 facilitate the formation of α-CsPbI3 perovskite films exhibiting high phase stability at room temperature for months and at 100°C for >150 hours but also the α-CsPbI3 perovskite solar cells (PSCs) display highly reproducible efficiency of 11.8%, a record for all-inorganic lead halide PSCs. Therefore, using the bication EDA presents a novel and promising strategy to design all-inorganic lead halide PSCs with high performance and reliability.
| S-EPMC5621977 | biostudies-literature
Project description:The stability of perovskite quantum dot solar cells is one of the key challenges of this technology. This study reveals the unique degradation behavior of cesium lead triiodide (CsPbI3) quantum dot solar cells. For the first time, it is shown that the oxygen-induced degradation and performance loss of CsPbI3 quantum dot photovoltaic devices can be reversed by exposing the degraded samples to humidity, allowing the performance to recover and even surpass the initial performance. By careful characterization and analysis throughout the degradation and recovery process, the underlying physical and chemical mechanisms that govern the evolution of the device performance could be identified. It is shown that the ligand shell of the quantum dots, rather than the instability of the semiconducting material itself, is the driving factor in these mechanisms. This highlights the important role of surface chemistry and ligand design in enhancing perovskite quantum dot photovoltaics.
| S-EPMC11840470 | biostudies-literature
Project description:All-inorganic perovskites have been intensively investigated as potential optoelectronic materials because of their excellent thermal stability, especially for CsPbI2 Br. Herein, the authors studied the effects of mixed passivation utilizing organic phenylethylammonium bromide and inorganic ionic cesium bromide (PEABr + CsBr) on the all-inorganic perovskite (CsPbI2 Br) solar cells for the first time. The treatment with different passivation mechanisms enhances the perovskite film quality, resulting in uniform surface morphology and compact film with low trap density. Besides, the passivation improves the energy level alignment, which benefits the hole extraction at the perovskite/HTL interface and drives the interface electron separation, suppressing the charge recombination and realizing a high open-circuit voltage (Voc ). Finally, the device represents a high power conversion efficiency (PCE) of 16.70%, a Voc of 1.30 V, and an excellent fill factor (FF) of 0.82. The Voc loss and high FF should be among the best values for CsPbI2 Br based devices. Furthermore, the treated devices exhibit remarkable long-term stability with only 8% PCE loss after storing in a glove box for more than 1000 h without encapsulation.
| S-EPMC8425869 | biostudies-literature
Project description:The application of ionic liquids in perovskite has attracted wide-spread attention for its astounding performance improvement of perovskite solar cells (PSCs). However, the detailed mechanisms behind the improvement remain mysterious. Herein, a series of imidazolium-based ionic liquids (IILs) with different cations and anions is systematically investigated to elucidate the passivation mechanism of IILs on inorganic perovskites. It is found that IILs display the following advantages: (1) They form ionic bonds with Cs+ and Pb2+ cations on the surface and at the grain boundaries of perovskite films, which could effectively heal/reduce the Cs+/I- vacancies and Pb-related defects; (2) They serve as a bridge between the perovskite and the hole-transport-layer for effective charge extraction and transfer; and (3) They increase the hydrophobicity of the perovskite surface to further improve the stability of the CsPbI2Br PSCs. The combination of the above effects results in suppressed non-radiative recombination loss in CsPbI2Br PSCs and an impressive power conversion efficiency of 17.02%. Additionally, the CsPbI2Br PSCs with IILs surface modification exhibited improved ambient and light illumination stability. Our results provide guidance for an in-depth understanding of the passivation mechanism of IILs in inorganic perovskites.
| S-EPMC8639893 | biostudies-literature
Project description:The advancement of perovskite solar cells (PVSCs) technology toward commercialized promotion needs high efficiency and optimum stability. By introducing a small molecular material such as tetratetracontane (TTC, CH3(CH2)42CH3) at the fullerene (C60)/perovskite interface of planar p-i-n PVSCs, we significantly reduced the interfacial traps, thereby suppressing electron recombination and facilitating electron extraction. Consequently, an improved efficiency of 20.05% was achieved with a high fill factor of 79.4%, which is one of the best performances for small molecular-modified PVSCs. Moreover, the hydrophobic TTC successfully protects the perovskite film from water damage. As a result, we realized a better long-term stability that maintains 87% of the initial efficiency after continuous exposure for 200 h in air.
| S-EPMC7770653 | biostudies-literature
Project description:Halide perovskites are technologically interesting across a wide range of optoelectronic devices, especially photovoltaics, but material stability has proven to be challenging. One degradation mode of note is the meta stability of the perovskite phase of some material compositions. This was studied by tracking the change of CsPbI3 from its optoelectronically relevant perovskite phase to its thermodynamically stable nonperovskite phase, δ-CsPbI3. We explore kinetics as a function of surface chemistry and observe a quantitatively similar, ∼5-fold, reduction in the phase transition rate between neat films and those treated with CsI and CdI2. Using XPS to explore surface chemistry changes across samples, we link the reduction in the phase transition rate to the surface iodide concentration. When informed by previous theoretical studies, these experiments point to surface iodide vacancies as the nucleation sites for δ-CsPbI3 growth and show that phase nucleation is the rate limiting step in δ-CsPbI3 formation for CsPbI3 perovskite thin films.
| S-EPMC11406572 | biostudies-literature
Project description:Even though lead halide perovskite has been demonstrated as a promising optoelectronic material for next-generation display applications, achieving high-efficiency and stable pure-red (620~635 nm) emission to cover the full visible wavelength is still challenging. Here, we report perovskite light-emitting diodes emitting pure-red light at 628 nm achieving high external quantum efficiencies of 26.04%. The performance is attributed to successful synthesizing strongly confined CsPbI3 quantum dots with good stability. The strong binding 2-naphthalene sulfonic acid ligands are introduced after nucleation to suppress Ostwald ripening, meanwhile, ammonium hexafluorophosphate exchanges long chain ligands and avoids regrowth by strong binding during the purification process. Both ligands enhance the charge transport ability of CsPbI3 quantum dots. The state-of-the-art synthesis of pure red CsPbI3 quantum dots achieves 94% high quantum efficiency, which can maintain over 80% after 50 days, providing a method for synthesizing stable strong confined perovskite quantum dots.
| S-EPMC11228028 | biostudies-literature
Project description:Lead halide perovskite nanocrystals are currently under intense investigation as components of solution-processed light-emitting devices (LEDs). We demonstrate LEDs based on Ag doped-passivated CsPbI3 perovskite nanocrystals with external quantum efficiency of 11.2% and an improved stability. Ag and trilayer MoO3/Au/MoO3 structure were used as cathode and anode, respectively, which reduce the electron injection barrier and ensure the high transparency and low resistance of the anode. Silver ions diffuse into perovskite film from the Ag electrode, as confirmed by the elemental mapping, the presence of Ag 3d peaks in the X-ray photoelectron spectrum, and the peak shift in the X-ray diffraction patterns of CsPbI3. In addition to doping, silver ions play the beneficial role of passivating surface defect states of CsPbI3 nanocrystals, which results in increased photoluminescence quantum yield, elongated emission lifetime, and improved stability of perovskite films.
| S-EPMC6269143 | biostudies-literature