Dataset Information

Sub-23 nm Particles Dominate Non-Volatile Particle Number Emissions of Road Traffic.

ABSTRACT: Ultrafine particles (<100 nm) in urban air are a serious health hazard not yet fully understood. Therefore, particle number concentration monitoring was recently included in the WHO air quality guidelines. At present, e.g., the EU regulates particle number only regarding the emissions of solid particles larger than 23 nm emitted by vehicles. The aim of this study was to examine the non-volatile fraction of sub-23 nm particles in a traffic-influenced urban environment. We measured the number concentration of particles larger than 1.4, 3, 10, and 23 nm in May 2018. Volatile compounds were thermally removed in the sampling line and the line losses were carefully determined. According to our results, the sub-23 nm particles dominated the non-volatile number concentrations. Additionally, based on the determined particle number emission factors, the traffic emissions of non-volatile sub-10 nm particles can be even 3 times higher than those of particles larger than 10 nm. Yet, only a fraction of urban sub-10 nm particles consisted of non-volatiles. Thus, while the results highlight the role of ultrafine particles in the traffic-influenced urban air, a careful consideration is needed in terms of future particle number standards to cover the varying factors affecting measured concentrations.

SUBMITTER: Lintusaari H

PROVIDER: S-EPMC10373488 | biostudies-literature | 2023 Jul

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Sub-23 nm Particles Dominate Non-Volatile Particle Number Emissions of Road Traffic.

Lintusaari Henna H Kuuluvainen Heino H Vanhanen Joonas J Salo Laura L Portin Harri H Järvinen Anssi A Juuti Paxton P Hietikko Riina R Teinilä Kimmo K Timonen Hilkka H Niemi Jarkko V JV Rönkkö Topi T

Environmental science & technology 20230713 29

Ultrafine particles (<100 nm) in urban air are a serious health hazard not yet fully understood. Therefore, particle number concentration monitoring was recently included in the WHO air quality guidelines. At present, e.g., the EU regulates particle number only regarding the emissions of solid particles larger than 23 nm emitted by vehicles. The aim of this study was to examine the non-volatile fraction of sub-23 nm particles in a traffic-influenced urban environment. We measured the number conc ...[more]

PMID: 37448254

Similar Datasets

Project description:Fused Deposition Modeling (FDM®), also known as Fused Filament Fabrication (FFF), 3D printers have been shown in numerous studies to emit ultrafine particles and volatile organic compounds (VOCs). Filament extruders, designed to create feedstocks for 3D printers, have recently come onto the consumer market for at-home hobbyists as an alternative to buying 3D printer filaments. These instruments allow for the creation of 3D printer filaments from raw plastic pellets. Given the similarity in processes and materials used by 3D printers and filament extruders, we hypothesized that filament extruders may also release ultrafine particle emissions and VOCs. An off-the-shelf filament extruder was operated in a 2 m3 chamber using three separate feedstocks: acrylonitrile butadiene styrene (ABS) pellets, pulverized poly-lactic acid (PLA), and PLA pellets. Ultrafine particle emissions were measured in real-time using a scanning mobility particle sizer and thermal desorption tubes were used for both non-targeted and targeted analysis of VOCs present in emissions. Ultrafine particle number emission rates were comparable to those found in 3D printer studies with the greatest to least emission rates from ABS pellets, pulverized PLA, and PLA pellets, respectively. In addition, the majority of particles released were found to be ultrafine (1-100 nm), similar to 3D printer studies. A variety of VOCs were identified using the ABS feedstock, including styrene and ethylbenzene, and PLA feedstock. Styrene average mass concentration amounts were found to be near the EPA Integrated Risk Information System Reference Concentration for Inhalation Exposure for 3 min and 5 min samples. Further studies will be needed to determine the impact on emissions of environmental volume, air exchange rate, and extruder settings such as extrusion speed and temperature. The results support the hypothesis that use of a filament extruder may present an additional exposure risk to 3D printer hobbyists.

Project description:Urban traffic is an important source of global CO2 emissions. Uncovering the temporal and structural characteristics can provide scientific support to identify the variation regulation and main subjects of urban traffic CO2 emissions. The road class is one of the most important factors influencing the urban traffic CO2 emissions. Based on the annual traffic field monitoring work in 2014 and the localized MOVES model, this study unravels the temporal variation and structural characteristics of the urban traffic CO2 emissions and conducts a comparative analysis of expressway (5R) and arterial road (DB), two typical classes of urban roads in Beijing. Obvious differences exist in the temporal variation characteristics of the traffic CO2 emissions between the expressway and arterial road at the annual, week and daily scales. The annual traffic CO2 emissions at the expressway (5R, with 47271.15 t) are more than ten times than those of the arterial road (DB, with 4139.19 t). Stronger weekly "rest effect" is observed at the expressway than the arterial road. The daily peak time and duration of the traffic CO2 emissions between the two classes of urban roads show significant differences particular in the evening peak. The differences of the structural characteristics between the two classes of urban roads are mainly reflected on the contribution of the public and freight transportation. Passenger vehicles play a predominant role at both the two classes of urban roads. The public transportation contributed more at DB (24.76%) than 5R (5.47%), and the freight transportation contributed more at 5R (23.41%) than DB (3.49%). The results suggest that the influence of traffic CO2 emissions on the CO2 flux is significant at the residential and commercial mixed underlying urban areas with arterial roads (DB) but not significant at the underlying urban park area with expressway (5R) in this study. The vegetation cover in urban areas have effects on the CO2 reduction. Increasing the design and construction of the green space along the urban roads with busy traffic flow will be an effective way to mitigate the urban traffic CO2 emissions and build the low-carbon cities.

Project description:Vehicles are a major source of anthropogenic emissions of carbon monoxide (CO), nitrogen oxides (NOx), and black carbon (BC). CO and NOx are known to be harmful to human health and contribute to ozone formation, while BC absorbs solar radiation that contributes to global warming and also has negative impacts on human health and visibility. Travel restrictions implemented during the COVID-19 pandemic provide researchers the opportunity to study the impact of large, on-road traffic reductions on local air quality. Traffic counts collected along Interstate-95, a major eight-lane highway in Maryland (US), reveal a 60% decrease in passenger car totals and an 8.6% (combination-unit) and 21% (single-unit) decrease in truck traffic counts in April 2020 relative to prior Aprils. The decrease in total on-road vehicles led to the near-elimination in stop-and-go traffic and a 14% increase in the mean vehicle speed during April 2020. Ambient near-road (NR) BC, CO, NOx, and carbon dioxide (CO2) measurements were used to determine vehicular emission ratios (ΔBC/ΔCO, ΔBC/ΔCO2, ΔNOx/ΔCO, ΔNOx/ΔCO2, and ΔCO/ΔCO2), with each ratio defined as the slope value of a linear regression performed on the concentrations of two pollutants within an hour. A decrease of up to a factor of two in ΔBC/ΔCO, ΔBC/ΔCO2, ΔNOx/ΔCO2, and in the fraction of on-road diesel vehicles from weekdays to weekends shows diesel vehicles to be the dominant source of BC and NOx emissions at this NR site. We estimate up to a 70% reduction in BC emissions in April 2020 compared to earlier years, and attribute much of this to lower diesel BC emissions resulting from improvements in traffic flow and fewer instances of acceleration and braking. Future efforts to reduce vehicular BC emissions should focus on improving traffic flow or turbocharger lag within diesel engines. Inferred BC emissions from the NR site also depend on ambient temperature, with an increase of 54% in ΔBC/ΔCO from -5 to 20 °C during the cold season, similar to previous studies that reported increasing BC emissions with rising temperature. The default setting of MOVES3, the current version of the mobile emission model used by the US EPA, does not adjust hot-running BC emissions for ambient temperature. Future work will focus on improving the accuracy of mobile emissions in air quality modeling by incorporating the effects of temperature and traffic flow in the system used to generate mobile emissions input for commonly used air quality models.

Dataset Information

Sub-23 nm Particles Dominate Non-Volatile Particle Number Emissions of Road Traffic.

Publications

Sub-23 nm Particles Dominate Non-Volatile Particle Number Emissions of Road Traffic.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets