Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Numerical studies on a ternary AgInTe₂ chalcopyrite thin film solar cell.

ABSTRACT: This paper theoretically outlines a new n-AlSb/p-AgInTe₂/p⁺-BaSi₂ solar cell. The dominance of several factors such as depth, carrier density and defects of every layer on the photovoltaic (PV) outcome has been ascertained applying Solar Cell Capacitance Simulator (SCAPS)-1D computer-based simulator. The AgInTe₂ (AIT) solar cell has been probed for finding the role of BaSi₂ as a back surface field (BSF) layer. It is revealed that the device power conversion efficiency (PCE) increments from 30% to 34% owing to the use of BaSi₂ semiconducting BSF with V_OC = 0.90 V, J_SC = 43.75 mA/cm², FF = 86.42%, respectively. The rippling of the output parameters with respect to the change in series and shunt resistances has also been probed and demonstrated. All the findings reveal the prospect of n-AlSb/p-AIT/p⁺-BaSi₂ dual-heterojunction thin film photovoltaic cell.

SUBMITTER: Joy A

PROVIDER: S-EPMC10432989 | biostudies-literature | 2023 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Numerical studies on a ternary AgInTe2 chalcopyrite thin film solar cell.

Joy Arifuzzaman A Abir Ahnaf Tahmid AT Mondal Bipanko Kumar BK Hossain Jaker J Hossain Jaker J

Heliyon 20230807 8

This paper theoretically outlines a new n-AlSb/p-AgInTe2/p+-BaSi2 solar cell. The dominance of several factors such as depth, carrier density and defects of every layer on the photovoltaic (PV) outcome has been ascertained applying Solar Cell Capacitance Simulator (SCAPS)-1D computer-based simulator. The AgInTe2 (AIT) solar cell has been probed for finding the role of BaSi2 as a back surface field (BSF) layer. It ...[more]

PMID: 37600362

Similar Datasets

Proposal and Numerical Analysis of Organic/Sb2Se3 All-Thin-Film Tandem Solar Cell.

Project description:The low bandgap antimony selenide (Sb2Se3) and wide bandgap organic solar cell (OSC) can be considered suitable bottom and top subcells for use in tandem solar cells. Some properties of these complementary candidates are their non-toxicity and cost-affordability. In this current simulation study, a two-terminal organic/Sb2Se3 thin-film tandem is proposed and designed through TCAD device simulations. To validate the device simulator platform, two solar cells were selected for tandem design, and their experimental data were chosen for calibrating the models and parameters utilized in the simulations. The initial OSC has an active blend layer, whose optical bandgap is 1.72 eV, while the initial Sb2Se3 cell has a bandgap energy of 1.23 eV. The structures of the initial standalone top and bottom cells are ITO/PEDOT:PSS/DR3TSBDT:PC71BM/PFN/Al, and FTO/CdS/Sb2Se3/Spiro-OMeTAD/Au, while the recorded efficiencies of these individual cells are about 9.45% and 7.89%, respectively. The selected OSC employs polymer-based carrier transport layers, specifically PEDOT:PSS, an inherently conductive polymer, as an HTL, and PFN, a semiconducting polymer, as an ETL. The simulation is performed on the connected initial cells for two cases. The first case is for inverted (p-i-n)/(p-i-n) cells and the second is for the conventional (n-i-p)/(n-i-p) configuration. Both tandems are investigated in terms of the most important layer materials and parameters. After designing the current matching condition, the tandem PCEs are boosted to 21.52% and 19.14% for the inverted and conventional tandem cells, respectively. All TCAD device simulations are made by employing the Atlas device simulator given an illumination of AM1.5G (100 mW/cm2). This present study can offer design principles and valuable suggestions for eco-friendly solar cells made entirely of thin films, which can achieve flexibility for prospective use in wearable electronics.

| S-EPMC10255658 | biostudies-literature

Photoexcitation-induced passivation of SnO2 thin film for efficient perovskite solar cells.

Project description:A high-quality tin oxide electron transport layer (ETL) is a key common factor to achieve high-performance perovskite solar cells (PSCs). However, the conventional annealing technique to prepare high-quality ETLs by continuous heating under near-equilibrium conditions requires high temperatures and a long fabrication time. Alternatively, we present a non-equilibrium, photoexcitation-induced passivation technique that uses multiple ultrashort laser pulses. The ultrafast photoexcitation and following electron-electron and electron-phonon scattering processes induce ultrafast annealing to efficiently passivate surface and bulk defects, and improve the crystallinity of SnO2, resulting in suppressing the carrier recombination and facilitating the charge transport between the ETL and perovskite interface. By rapidly scanning the laser beam, the annealing time is reduced to several minutes, which is much more efficient compared with conventional thermal annealing. To demonstrate the university and scalability of this technique, typical antisolvent and antisolvent-free processed hybrid organic-inorganic metal halide PSCs have been fabricated and achieved the power conversion efficiency (PCE) of 24.14% and 22.75% respectively, and a 12-square-centimeter module antisolvent-free processed perovskite solar module achieves a PCE of 20.26%, with significantly enhanced performance both in PCE and stability. This study establishes a new approach towards the commercialization of efficient low-temperature manufacturing of PSCs.

| S-EPMC10583279 | biostudies-literature

Controllable Multinary Alloy Electrodeposition for Thin-Film Solar Cell Fabrication: A Case Study of Kesterite Cu2ZnSnS4.

Project description:Electrodeposition (ED) technology is a low-cost industrial candidate for solar cell fabrication. However, the practical aspects of controlling deposit morphology and composition have not been significantly addressed because of the complex co-plating variables that still need to be understood for multinary alloy ED. This work addresses these practical aspects on how to control composition and deposit morphology using co-electrodeposited kesterite alloy precursors as a case study. The alloy precursors co-plated under the optimized conditions from a mixed thiosulfate-sulfite electrolyte bath show uniform, smooth, and compact film morphology as well as uniform distribution of composition, well suited for efficient kesterite absorbers, finally delivering a Cu2ZnSnS4 (CZTS) thin-film solar cell with 7.4% efficiency based on a configuration Mo/CZTS/CdS/ZnO/aluminum-doped ZnO. This work underscores that alloy ED, with the advantage of controllable composition and morphology, holds promise for low-cost industrial manufacture of thin-film solar cells.

| S-EPMC6135938 | biostudies-literature

Heteroepitaxial Cu2O thin film solar cell on metallic substrates.

Project description:Heteroepitaxial, single-crystal-like Cu2O films on inexpensive, flexible, metallic substrates can potentially be used as absorber layers for fabrication of low-cost, high-performance, non-toxic, earth-abundant solar cells. Here, we report epitaxial growth of Cu2O films on low cost, flexible, textured metallic substrates. Cu2O films were deposited on the metallic templates via pulsed laser deposition under various processing conditions to study the influence of processing parameters on the structural and electronic properties of the films. It is found that pure, epitaxial Cu2O phase without any trace of CuO phase is only formed in a limited deposition window of P(O2) - temperature. The (00l) single-oriented, highly textured, Cu2O films deposited under optimum P(O2) - temperature conditions exhibit excellent electronic properties with carrier mobility in the range of 40-60 cm(2) V(-1) s(-1) and carrier concentration over 10(16) cm(-3). The power conversion efficiency of 1.65% is demonstrated from a proof-of-concept Cu2O solar cell based on epitaxial Cu2O film prepared on the textured metal substrate.

| S-EPMC4635375 | biostudies-other

Highly efficient single-junction GaAs thin-film solar cell on flexible substrate.

Project description:There has been much interest in developing a thin-film solar cell because it is lightweight and flexible. The GaAs thin-film solar cell is a top contender in the thin-film solar cell market in that it has a high power conversion efficiency (PCE) compared to that of other thin-film solar cells. There are two common structures for the GaAs solar cell: n (emitter)-on-p (base) and p-on-n. The former performs better due to its high collection efficiency because the electron diffusion length of the p-type base region is much longer than the hole diffusion length of the n-type base region. However, it has been limited to fabricate highly efficient n-on-p single-junction GaAs thin film solar cell on a flexible substrate due to technical obstacles. We investigated a simple and fast epitaxial lift-off (ELO) method that uses a stress originating from a Cr/Au bilayer on a 125-μm-thick flexible substrate. A metal combination of AuBe/Pt/Au is employed as a new p-type ohmic contact with which an n-on-p single-junction GaAs thin-film solar cell on flexible substrate was successfully fabricated. The PCE of the fabricated single-junction GaAs thin-film solar cells reached 22.08% under air mass 1.5 global illumination.

| S-EPMC4951801 | biostudies-literature

Planar Heterojunction Solar Cell Employing a Single-Source Precursor Solution-Processed Sb2S3 Thin Film as the Light Absorber.

Project description:We discuss here a solution-processed thin film of antimony trisulphide (Sb2S3; band gap ≈ 1.7 eV; electronic configuration: ns2np0) for applications in planar heterojunction (PHJ) solar cells. An alternative solution processing method involving a single-metal organic precursor, viz., metal-butyldithiocarbamic acid complex, is used to grow the thin films of Sb2S3. Because of excess sulphide in the metal complex, the formation of any oxide is nearly retarded. Sb2S3 additionally displays structural anisotropy with a ribbon-like structure along the [001] direction. These ribbon-like structures, if optimally oriented with respect to the electron transport layer (ETL)/glass substrate, can be beneficial for light-harvesting and charge-transport properties. A PHJ solar cell is fabricated comprising Sb2S3 as the light absorber and CdS as an ETL coated on to FTO. With varying film sintering temperature and thickness, the typical ribbon-like structures predominantly with planes hkl: l = 0 stacked horizontally along with respect to CdS/FTO are obtained. The morphology of the films is observed to be a function of the sintering temperature, with higher sintering temperatures yielding compact and smooth films with large-sized grains. Maximum photon to electricity efficiency of 2.38 is obtained for PHJ solar cells comprising 480 nm thick films of Sb2S3 sintered at 350 °C having a grain size of few micrometers (>5 μm). The study convincingly shows that improper grain orientation, which may lead to nonoptimal alignments of the intrinsic structure with regard to the ETL/glass substrate, is not the sole parameter for determining photovoltaics performance. Other solution-processing parameters can still be suitably chosen to generate films with optimum morphology, leading to high photon to electricity efficiency.

| S-EPMC6682112 | biostudies-literature

Hydrogenated TiO2 Thin Film for Accelerating Electron Transport in Highly Efficient Planar Perovskite Solar Cells.

Project description:Intensive studies on low-temperature deposited electron transport materials have been performed to improve the efficiency of n-i-p type planar perovskite solar cells to extend their application on plastic and multijunction device architectures. Here, a TiO2 film with enhanced conductivity and tailored band edge is prepared by magnetron sputtering at room temperature by hydrogen doping (HTO), which accelerates the electron extraction from perovskite photoabsorber and reduces charge transfer resistance, resulting in an improved short circuit current density and fill factor. The HTO film with upward shifted Fermi level guarantees a smaller loss on VOC and facilitates the growth of high-quality absorber with much larger grains and more uniform size, leading to devices with negligible hysteresis. In comparison with the pristine TiO2 prepared without hydrogen doping, the HTO-based device exhibits a substantial performance enhancement leading to an efficiency of 19.30% and more stabilized photovoltaic performance maintaining 93% of its initial value after 300 min continuous illumination in the glove box. These properties permit the room-temperature magnetron sputtered HTO film as a promising electron transport material for flexible and tandem perovskite solar cell in the future.

| S-EPMC5644234 | biostudies-literature

Polymeric Interlayer in CdS-Free Electron-Selective Contact for Sb2Se3 Thin-Film Solar Cells.

Project description:High open-circuit voltage in Sb2Se3 thin-film solar cells is a key challenge in the development of earth-abundant photovoltaic devices. CdS selective layers have been used as the standard electron contact in this technology. Long-term scalability issues due to cadmium toxicity and environmental impact are of great concern. In this study, we propose a ZnO-based buffer layer with a polymer-film-modified top interface to replace CdS in Sb2Se3 photovoltaic devices. The branched polyethylenimine layer at the ZnO and transparent electrode interface enhanced the performance of Sb2Se3 solar cells. An important increase in open-circuit voltage from 243 mV to 344 mV and a maximum efficiency of 2.4% was achieved. This study attempts to establish a relation between the use of conjugated polyelectrolyte thin films in chalcogenide photovoltaics and the resulting device improvements.

| S-EPMC9964030 | biostudies-literature

Numerical dataset for analyzing the performance of a highly efficient ultrathin film CdTe solar cell.

Project description:The article comprises numerical data of distinct semiconductor materials applied in the sketch of a CdTe absorber based ultrathin film solar cell. Additionally, the contact layer parametric values of the cell have been described also. Therefore, the simulation has been conducted with data related to the hetero-structured (n-ZnO/n-CdS/p-CdTe/p-ZnTe) semiconductor device and a J-V characteristics curve was obtained. The operating conditions have also been recorded. Afterward, the solar cell performance parameters such as open circuit voltage (Voc), short circuit current density (Jsc), fill factor (FF), and efficiency (η) have been investigated and compared with reference cell.

| S-EPMC5412006 | biostudies-literature

Peel-and-stick: fabricating thin film solar cell on universal substrates.

Project description:Fabrication of thin-film solar cells (TFSCs) on substrates other than Si and glass has been challenging because these nonconventional substrates are not suitable for the current TFSC fabrication processes due to poor surface flatness and low tolerance to high temperature and chemical processing. Here, we report a new peel-and-stick process that circumvents these fabrication challenges by peeling off the fully fabricated TFSCs from the original Si wafer and attaching TFSCs to virtually any substrates regardless of materials, flatness and rigidness. With the peel-and-stick process, we integrated hydrogenated amorphous silicon (a-Si:H) TFSCs on paper, plastics, cell phone and building windows while maintaining the original 7.5% efficiency. The new peel-and-stick process enables further reduction of the cost and weight for TFSCs and endows TFSCs with flexibility and attachability for broader application areas. We believe that the peel-and-stick process can be applied to thin film electronics as well.

| S-EPMC3533453 | biostudies-other