Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Quantum Dot-Based Fluorometric Sensor for Hg(II) in Water Customizable for Onsite Visual Detection.

ABSTRACT: An easy naked-eye detection technique for mercuric ions in water using silanized quantum dots is demonstrated. Cadmium selenide quantum dots were synthesized and rendered water soluble by silica overcoating. The quantum dot emission was instantly turned off by the mercuric ions in the analyte, enabling visual detection. The emission quenching was associated with a concomitant bathochromic shift, both in the absorption and emission profiles. The underlying mechanism is a permanent surface modification of quantum dots by mercuric ions, altering the electronic structure and, in turn, the photophysical properties. The results confirmed the potential of this simple system to be customized for on-site visual detection of mercury contamination in water bodies, biological fluids, and soil with high selectivity and sensitivity.

SUBMITTER: Nair VR

PROVIDER: S-EPMC10433339 | biostudies-literature | 2023 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Quantum Dot-Based Fluorometric Sensor for Hg(II) in Water Customizable for Onsite Visual Detection.

Nair Vinayakan Ramachandran VR Shanthil Madhavan M Sandeep Kulangara K Savitha Kadencheeri Unnikrishnan KU Archana Aravind A Deepamol Varghese V Swetha Chengat C Vaishag Pushpalatha Vijayakumar PV

ACS omega 20230802 32

An easy naked-eye detection technique for mercuric ions in water using silanized quantum dots is demonstrated. Cadmium selenide quantum dots were synthesized and rendered water soluble by silica overcoating. The quantum dot emission was instantly turned off by the mercuric ions in the analyte, enabling visual detection. The emission quenching was associated with a concomitant bathochromic shift, both in the absorption and emission profiles. The underlying mechanism is a permanent surface modific ...[more]

PMID: 37599930

Similar Datasets

Dual-Emissive Carbon Quantum Dot-Tb Nanocomposite as a Fluorescent Indicator for a Highly Selective Visual Detection of Hg(II) in Water.

Project description:We report very fast, green, and large-scale synthesis of amino-functionalized carbon quantum dots (CQDs) using a domestic microwave to investigate CQD-Tb-based dual emission for visual detection of toxic Hg2+. Citric acid and p-phenylenediamine are used as precursor materials to synthesize the CQD, which shows excitation-independent blue luminescence. To achieve the dual emission, Tb-containing CQD is synthesized in a very easy and cost-effective way. These dual-emissive fluorescent materials have been successfully used as a fluorescent indicator for visual detection of toxic Hg2+ metal ions. An instant color change from blue to green in the presence of a very low amount of Hg2+ under a UV lamp (λ365nm) is observed. The material is highly sensitive and selective toward detection of mercury ions in the presence of other metal ions. The photoluminescence quenching mechanism (photoinduced electron transfer process) has been explained using an electronic band diagram supported by zeta-potential and time-correlated single photon counting measurements.

| S-EPMC6645128 | biostudies-literature

Nitrogen and Sulfur Co-Doped Graphene-Quantum-Dot-Based Fluorescent Sensor for Rapid Visual Detection of Water Content in Organic Solvents.

Project description:Accurate water content detection is crucial for optimizing chemical reactions, ensuring product quality in pharmaceutical manufacturing, and maintaining food safety. In this study, nitrogen and sulfur co-doped graphene quantum dots (R-GQDs) were synthesized via a one-step hydrothermal method using o-phenylenediamine as the carbon source. The synthesis conditions, including reaction time, temperature, o-phenylenediamine concentration, and H2SO4/water ratio, were optimized using the Box-Behnken response surface methodology. The R-GQDs exhibited excellent fluorescence stability and distinct solvent-dependent characteristics, alongside a broad linear detection range and high sensitivity, making them highly suitable for dual-mode water content detection (colorimetric and fluorescent). To enhance the accuracy of visual detection, R-GQDs were incorporated into portable test strips with smartphone-assisted analysis, compensating for the human eye's limitations in distinguishing subtle color changes. The sensor's practical utility was validated through spiked recovery experiments in food samples, and the R-GQDs demonstrated good biocompatibility for in vivo imaging in shrimp. These findings highlight a novel strategy for developing portable, real-time water content sensors with potential applications in both portable detection systems and biological imaging.

| S-EPMC11547257 | biostudies-literature

A customizable class of colloidal-quantum-dot spasers and plasmonic amplifiers.

Project description:Colloidal quantum dots are robust, efficient, and tunable emitters now used in lighting, displays, and lasers. Consequently, when the spaser-a laser-like source of high-intensity, narrow-band surface plasmons-was first proposed, quantum dots were specified as the ideal plasmonic gain medium for overcoming the significant intrinsic losses of plasmons. Many subsequent spasers, however, have required a single material to simultaneously provide gain and define the plasmonic cavity, a design unable to accommodate quantum dots and other colloidal nanomaterials. In addition, these and other designs have been ill suited for integration with other elements in a larger plasmonic circuit, limiting their use. We develop a more open architecture that decouples the gain medium from the cavity, leading to a versatile class of quantum dot-based spasers that allow controlled generation, extraction, and manipulation of plasmons. We first create aberration-corrected plasmonic cavities with high quality factors at desired locations on an ultrasmooth silver substrate. We then incorporate quantum dots into these cavities via electrohydrodynamic printing or drop-casting. Photoexcitation under ambient conditions generates monochromatic plasmons (0.65-nm linewidth at 630 nm, Q ~ 1000) above threshold. This signal is extracted, directed through an integrated amplifier, and focused at a nearby nanoscale tip, generating intense electromagnetic fields. More generally, our device platform can be straightforwardly deployed at different wavelengths, size scales, and geometries on large-area plasmonic chips for fundamental studies and applications.

| S-EPMC5609809 | biostudies-literature

A RGB-Type Quantum Dot-based Sensor Array for Sensitive Visual Detection of Trace Formaldehyde in Air.

Project description:A simple colorimetric sensor array based on red-emitting CdTe QDs and green-colored fluorescein that exhibited RGB-type color change was proposed for visual detection of trace formaldehyde. In the presence of formaldehyde, the red fluorescence from CdTe QDs was quenched while the green fluorescein was inert thus as a reference. Through harvesting the varied quenching efficiency of different ligand-capped CdTe QDs by formaldehyde, a simple sensor array can be constructed for both selective detection of formaldehyde with high sensitivity (LOD of 0.08 ppm) and identification of the existence of potential interference from acetaldehyde. The quenching mechanisms of formaldehyde toward different ligand capped CdTe QDs were studied with fluorescence lifetime, zeta potential, and also theoretical calculations. The results from theoretical calculations were in good agreement with the experimental results. The proposed sensor array was successfully explored for visual analysis of formaldehyde in indoor air samples.

| S-EPMC5103289 | biostudies-literature

Quantum dot to quantum dot Forster resonance energy transfer: engineering materials for visual color change sensing.

Project description:In this work, quantum dots (QDs) of various heterostructured compositions and shell thicknesses are used as Förster or fluorescence resonance energy transfer (FRET) donors and acceptors to optimize QD-QD FRET sensing through materials design. While several reports have highlighted the advantages of using QD-dye, rather than dye-dye, FRET in sensing applications, QD-QD FRET has lagged behind in development as a result of high background signal from direct acceptor excitation. However, in designing sensors for longitudinal studies, QD-dye sensors are limited by the photostability of the fluorescent dye. While fluorescence generally affords higher sensitivity than absorbance-based readouts, the instrumentation needed for detecting fluorescence can be expensive, motivating the development of sensors bright enough to be seen by eye or imaged with cheap consumer electronics. Harnessing the exceptional brightness of QDs, our study focuses on the development of QD-QD FRET pairs where color change is achieved for visual readout and instrument-free sensing. We demonstrate that bulk semiconductor material characteristics can be used to a priori predict and tailor the behavior of QD-QD FRET systems, and our findings show that it is possible to create QD donors that are brighter than their acceptors through concerted compositional and morphological choices in heterostructured QDs. This is significant for developing visual sensors, as we show that the most profound color change occurs when the direct acceptor emission is lower than that of the donor. Finally, the use of an optimal cadmium-free QD-QD FRET pair is presented in a pH sensor that shows a large range of pH-dependent color change with bright, instrument-free readout.

| S-EPMC8275315 | biostudies-literature

Quantum strain sensor with a topological insulator HgTe quantum dot.

Project description:We present a theory of electronic properties of HgTe quantum dot and propose a strain sensor based on a strain-driven transition from a HgTe quantum dot with inverted bandstructure and robust topologically protected quantum edge states to a normal state without edge states in the energy gap. The presence or absence of edge states leads to large on/off ratio of conductivity across the quantum dot, tunable by adjusting the number of conduction channels in the source-drain voltage window. The electronic properties of a HgTe quantum dot as a function of size and applied strain are described using eight-band k · p Luttinger and Bir-Pikus Hamiltonians, with surface states identified with chirality of Luttinger spinors and obtained through extensive numerical diagonalization of the Hamiltonian.

| S-EPMC4014981 | biostudies-other

Biocompatible quantum dot-antibody conjugate for cell imaging, targeting and fluorometric immunoassay: crosslinking, characterization and applications.

Project description:Quantum dots (QDs) are important fluorescent probes that offer great promise for bio-imaging research due to their superior optical properties. However, QDs for live cell imaging and the tracking of cells need more investigation to simplify processing procedures, improving labeling efficiency, and reducing chronic toxicity. In this study, QDs were functionalized with bovine serum albumin (BSA) via a chemical linker. Anti-human immunoglobulin antibodies were oxidized by sodium periodate to create reactive aldehyde groups for a spontaneous reaction with the amine groups of BSA-modified QDs. An antibody-labeled QD bioconjugate was characterized using agarose gel electrophoresis, dynamic light scattering, and zeta potential. Using fluorescence spectroscopy, we found that the fluorescence of QDs was retained after multiple conjugation steps. The cell-labeling function of the QD bioconjugate was confirmed using an image analyzer and confocal microscopy. The QD bioconjugate specifically targeted human immunoglobulin on the membrane surface of recombinant cells. In addition, the QD bioconjugate applied in fluorometric immunoassay was effective for the quantitative analysis of human immunoglobulin in an enzyme-linked immunosorbent assay. The developed QD bioconjugate may offer a promising platform to develop biocompatible tools to label cells and quantify antibodies in the immunoassay.

| S-EPMC9073096 | biostudies-literature

Broadband perovskite quantum dot spectrometer beyond human visual resolution.

Project description:The quantum dot spectrometer, fabricated by integrating different quantum dots with an image sensor to reconstruct the target spectrum from spectral-coupled measurements, is an emerging and promising hyperspectrometry technology with high resolution and a compact size. The spectral resolution and spectral range of quantum dot spectrometers have been limited by the spectral variety of the available quantum dots and the robustness of algorithmic reconstruction. Moreover, the spectrometer integration of quantum dots also suffers from inherent photoluminescence emission and poor batch-to-batch repeatability. In this work, we developed nonemissive in situ fabricated MA3Bi2X9 and Cs2SnX6 (MA = CH3NH3; X = Cl, Br, I) perovskite-quantum-dot-embedded films (PQDFs) with precisely tunable transmittance spectra for quantum dot spectrometer applications. The resulting PQDFs contain in situ fabricated perovskite nanocrystals with homogenous dispersion in a polymeric matrix, giving them advantageous features such as high transmittance efficiency and good batch-to-batch repeatability. By integrating a filter array of 361 kinds of PQDFs with a silicon-based photodetector array, we successfully demonstrated the construction of a perovskite quantum dot spectrometer combined with a compressive-sensing-based total-variation optimization algorithm. A spectral resolution of ~1.6 nm was achieved in the broadband of 250-1000 nm. The performance of the perovskite quantum dot spectrometer is well beyond that of human eyes in terms of both the spectral range and spectral resolution. This advancement will not only pave the way for using quantum dot spectrometers for practical applications but also significantly impact the development of artificial intelligence products, clinical treatment equipment, scientific instruments, etc.

| S-EPMC7190644 | biostudies-literature

Water-Borne Perovskite Quantum Dot-Loaded, Polystyrene Latex Ink.

Project description:Highly lipophilic nanocrystals (NCs) of cesium lead halides were successfully embedded in polystyrene (PS) particles by deliberately controlling the swelling of the PS particles in the mixtures of good and bad organic solvents. The resulting composite particles were readily transferred into water via simple stepwise solvent exchange, which yielded water-borne perovskite NC-based inks with outstanding structural and chemical stability in aqueous media. Minimal change in the photoluminescence (PL) of the NCs loaded in the PS particles was visible after 1 month of incubation of the composite particles in water in a broad pH range from 1 to 14, which could otherwise be hardly realized. Loading into the PS particles also made the NCs highly stable against polar organic solvents, such as ethanol, intense light irradiation, and heat. The NC PL intensity slightly changed after the composite particles were heated at 75°C and under irradiation of strong blue light (@365 nm) for 1 h. Furthermore, the PS matrices could effectively inhibit the exchange of halide anions between two differently sized perovskite NCs loaded therein, thereby offering a considerable technical advantage in the application of multiple perovskite NCs for multicolor display in the future.

| S-EPMC6206898 | biostudies-literature

Efficient quantum dot-quantum dot and quantum dot-dye energy transfer in biotemplated assemblies.

Project description:CdSe semiconductor nanocrystal quantum dots are assembled into nanowire-like arrays employing microtubule fibers as nanoscale molecular "scaffolds." Spectrally and time-resolved energy-transfer analysis is used to assess the assembly of the nanoparticles into the hybrid inorganic biomolecular structure. Specifically, we demonstrate that a comprehensive study of energy transfer between quantum dot pairs on the biotemplate and, alternatively, between quantum dots and molecular dyes embedded in the microtubule scaffold comprises a powerful spectroscopic tool for evaluating the assembly process. In addition to revealing the extent to which assembly has occurred, the approach allows determination of particle-to-particle (and particle-to-dye) distances within the biomediated array. Significantly, the characterization is realized in situ, without need for further sample workup or risk of disturbing the solution-phase constructs. Furthermore, we find that the assemblies prepared in this way exhibit efficient quantum dot-quantum dot and quantum dot-dye energy transfer that affords faster energy-transfer rates compared to densely packed quantum dot arrays on planar substrates and to small-molecule-mediated quantum dot-dye couples, respectively.

| S-EPMC3062676 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data