Low Temperature Processing of Iron Oxide Nanoflakes from Red Mud Extract toward Favorable De-arsenification of Water
Ontology highlight
ABSTRACT:
SUBMITTER:
PROVIDER: S-EPMC10433522 | biostudies-literature | 2023 Aug
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Bayer red mud (BRM) is a kind of solid waste with high hematite content, and its effective utilization is difficult due to the special physicochemical properties. In this work, Fe2O3 in BRM was reduced to Fe3O4 by biomass, and iron concentrate and high activity tailings were obtained after magnetic separation. The pozzolanic activity and hydration characteristics of the tailings were systematically studied. The results showed that the relatively stable polymerization structures of Si-O and Al-O in BRM are destroyed under the effect of biomass reduction at 650 °C, and some fracture bonds and activation points are formed in the structures. The aluminosilicate phases in the BRM were easy to transform into the active substances of Si and Al. The pozzolanic activity of tailings is greatly improved, and its pozzolanic activity index is 91%. High polymerization degree of gel and ettringite are formed since more active substances and alkali in the tailings promote the hydration reaction of cement-based cementitious materials, which made cementitious materials have dense matrix, good mechanical properties, and environmental performance. This work has realized the full quantitative utilization of BRM and provided a feasible way for the resource utilization of BRM.
| S-EPMC8306629 | biostudies-literature
Project description:Anticipated future demand and limited primary sources of Sc highlight the importance of secondary Sc resources such as bauxite residue (red mud). In this study, a process route starting from red mud aiming to recover Sc as a concentrate by a combination of pyrometallurgical and hydrometallurgical processes was developed. Bauxite residue was treated in an electric arc furnace (EAF) for Fe removal as well as slag conditioning with varying flux additions and various cooling conditions. 95% of iron recovery to the metal was achieved. Resulting slags were subjected to identical H2O2 supported H2SO4 leaching conditions at 75 °C. The effect of slag mineralogy and crystallinity on the leaching efficiencies were investigated using XRD and QEMSCAN analysis. As a result of the highly amorphous nature of acidic slags, maximum of 72% Sc leaching was obtained. For leached slags, water quenched basic slag was found to be the most promising condition resulting in an extreme Sc leaching yield of 97% and this slag was selected for the further Sc precipitation. High impurity removal rates and selective Sc separation were achieved with a triple-stage successive precipitation to synthesize a Sc concentrate. Starting from EAF treatment followed by leaching and precipitation, 85% of the initial Sc in the red mud was successfully recovered as Sc phosphate.
| S-EPMC6694154 | biostudies-literature
Project description:Novel magnetic nanohybrids composed of nanomaghemite covered by organic molecules were successfully synthesized at room temperature with different functionalization agents (sodium polystyrene sulfonate, oxalic acid, and cetyltrimethylammonium bromide) in low and high concentrations. Structural, vibrational, morphological, electron energy-loss spectroscopy, magnetic, and Mössbauer characterizations unraveled the presence of mainly cubic inverse spinel maghemite (γ-Fe2O3), whilst X-ray diffraction and 57Fe Mössbauer spectroscopy showed that most samples contain a minor amount of goethite phase (α-FeOOH). Raman analysis at different laser power revealed a threshold value of 0.83 mW for all samples, for which the γ-Fe2O3 to α-Fe2O3 phase transition was observed. Imaging microscopy revealed controlled-size morphologies of nanoparticles, with sizes in the range from 8 to 12 nm. Organic functionalization of the magnetic nanoparticles was demonstrated by vibrational and thermogravimetric measurements. For some samples, Raman, magnetic, and Mössbauer measurements suggested an even more complex core-shell-like configuration, with a thin shell containing magnetite (Fe3O4) covering the γ-Fe2O3 surface, thus causing an increase in the saturation magnetization of approximately 11% against nanomaghemite. Field cooling hysteresis curves at 5 K did not evidence an exchange bias effect, confirming that the goethite phase is not directly interacting magnetically with the functionalized maghemite nanoparticles. These magnetic nanohybrids may be suitable for applications in effluent remediation and biomedicine.
| S-EPMC9368286 | biostudies-literature
Project description:To investigate the mechanisms related to anti-ferroptotic effects of red clover extract, we performed differentially expressed genes analysis using data obtained from the RNA-seq of system xCT knockout mouse embryonic fibroblast cells.
2023-12-01 | GSE221119 | GEO
Project description:Nanotechnology is a treasure trove of diversified themes which are endowed with broad applications. Herein, iron oxide (Fe2O3) nanoparticles were synthesized using Phyllanthus emblica aqueous fruit extract. The UV-Visible spectrum exhibited a surface plasmon resonance peak at 295nm. Fourier Transform Infrared Spectroscopy provided insight into the functional groups responsible for capping. X-ray diffraction analysis authenticated the crystalline nature of nanoparticles, while energy dispersive X-ray spectroscopy divulged that iron and oxygen comprised 54% of the nanoparticles' weight. Scanning electron microscopy established irregular morphology and agglomeration of nanoparticles. The Fe2O3 nanoparticles validated potent antimicrobial activity against 11 bacterial and 1 fungal isolates. The biggest zone of inhibition (23mm) was measured against S. enterica, whereas the smallest zone of inhibition (12mm) was documented against C. albicans and E. coli. The values for minimum inhibitory concentration ranged between 10 and 15μg/ml for all microbes. Nevertheless, no synergy was exhibited by the nanoparticles with any of the selected antibiotics (Fractional Inhibitory Concentration Index > 1). The photocatalytic dye degradation capability of Fe2O3 nanoparticles was assessed and the observations implied a significant increase in degradation of methyl red although, not of methylene blue. Furthermore, the nanoparticles were in possession of substantial antioxidant (34-38%) and anti-inflammatory (31-38%) capacities. Consequent upon the robust activities of P. emblica-mediated nanoparticles, these can be scrutinized for biomedical and environmental implementations in future.
| S-EPMC11412514 | biostudies-literature
Project description:Hematite is a promising and extensively investigated material for various photoelectrochemical (PEC) processes for energy conversion and storage, in particular for oxidation reactions. Thermal treatments during synthesis of hematite are found to affect the performance of hematite electrodes considerably. Herein, we present hematite thin films fabricated via one-step oxidation of Fe by rapid thermal processing (RTP). In particular, we investigate the effect of oxidation temperature on the PEC properties of hematite. Films prepared at 750 °C show the highest activity towards water oxidation. These films show the largest average grain size and the highest charge carrier density, as determined from electron microscopy and impedance spectroscopy analysis. We believe that the fast processing enabled by RTP makes this technique a preferred method for investigation of novel materials and architectures, potentially also on nanostructured electrodes, where retaining high surface area is crucial to maximize performance.
| S-EPMC5238422 | biostudies-literature
Project description:The impact of reduction post-treatment and phase segregation of cobalt iron oxide nanowires on their electrochemical oxygen evolution reaction (OER) activity is investigated. A series of cobalt iron oxide spinel nanowires are prepared via the nanocasting route using ordered mesoporous silica as a hard template. The replicated oxides are selectively reduced through a mild reduction that results in phase transformation as well as the formation of grain boundaries. The detailed structural analyses, including the 57Fe isotope-enriched Mössbauer study, validated the formation of iron oxide clusters supported by ordered mesoporous CoO nanowires after the reduction process. This affects the OER activity significantly, whereby the overpotential at 10 mA/cm2 decreases from 378 to 339 mV and the current density at 1.7 V vs RHE increases by twofold from 150 to 315 mA/cm2. In situ Raman microscopy revealed that the surfaces of reduced CoO were oxidized to cobalt with a higher oxidation state upon solvation in the KOH electrolyte. The implementation of external potential bias led to the formation of an oxyhydroxide intermediate and a disordered-spinel phase. The interactions of iron clusters with cobalt oxide at the phase boundaries were found to be beneficial to enhance the charge transfer of the cobalt oxide and boost the overall OER activity by reaching a Faradaic efficiency of up to 96%. All in all, the post-reduction and phase segregation of cobalt iron oxide play an important role as a precatalyst for the OER.
| S-EPMC8970005 | biostudies-literature
Project description:In recent years, iron-based nanoparticles (FeNPs) have been successfully used in environmental remediation and water treatment. This study examined ecotoxicity of two FeNPs produced by green tea extract (smGT, GTFe) and their ability to degrade malachite green (MG). Their physicochemical properties were assessed using transmission electron microscopy, X-ray powder diffraction, dynamic light scattering, and transmission Mössbauer spectroscopy. Using a battery of ecotoxicological bioassays, we determined toxicity for nine different organisms, including bacteria, cyanobacterium, algae, plants, and crustaceans. GTFe, amorphous complex of Fe(II, III) ions and polyphenols from green tea extract, proved low capacity to degrade MG and was toxic to all tested organisms. Superparamagnetic iron oxide NPs (smGT) derived from GTFe, showed no toxic effect on most of the tested organisms up to a concentration of 1g/L, except for algae and cyanobacterium and removed 93 % MG at concentration 125 mg Fe/L after 60 minutes. The procedure described in this paper generates new superparamagnetic iron oxide NPs from existing and toxic GTFe, which are nontoxic and has degradative potential for organic compounds. These findings suggest low ecotoxicological risks and suitability of this green-synthesized FeNPs for environmental remediation purposes.
| S-EPMC6093305 | biostudies-literature
Project description:Iron oxide nanoparticles (IONPs) were synthesized via a block copolymer-assisted hydrothermal method and the phase purity and the crystal structure were investigated by X-ray diffraction. The Rietveld analysis of X-ray diffractometer spectra shows the hexagonal phase symmetry of α-Fe2O3. Further, the vibrational study suggests Raman active modes: 2A1g + 5Eg associated with α-Fe2O3, which corroborates the Rietveld analysis and orbital analysis of 2PFe. The superparamagnetic behavior is confirmed by magnetic measurements performed by the physical properties measurement system. The systematic study of the Congo red (CR) interaction with IONPs using a UV-visible spectrophotometer and a liquid chromatography-tandem mass spectrometry system equipped with a triple quadrupole mass analyzer and an electrospray ionization interface shows effective adsorption. In visible light, the Fe2O3 nanoparticles get easily excited and generate electrons and holes. The photogenerated electrons reduce the Fe3+ ions to Fe2+ ions. The Fe2+/H2O2 oxidizes CR by the Fenton mechanism. The strong adsorption ability of prepared nanoparticles towards dyes attributes the potential candidates for wastewater treatment and other catalytic applications.
| S-EPMC9964741 | biostudies-literature