Desulfurization of Diesel Using Ionic Liquids: Process Design and Optimization Using COSMO-Based Models and Aspen Plus
Ontology highlight
ABSTRACT:
SUBMITTER:
PROVIDER: S-EPMC10448650 | biostudies-literature | 2023 Aug
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:In recent years, the fight against climate change and the mitigation of the impact of fluorinated gases (F-gases) on the atmosphere is a global concern. Development of technologies that help to efficiently separate and recycle hydrofluorocarbons (HFCs) at the end of the refrigeration and air conditioning equipment life is a priority. The technological development is important to stimulate the F-gas capture, specifically difluoromethane (R-32) and 1,1,1,2-tetrafluoroethane (R-134a), due to their high global warming potential. In this work, the COSMO-RS method is used to analyze the solute-solvent interactions and to determine Henry's constants of R-32 and R-134a in more than 600 ionic liquids. The three most performant ionic liquids were selected on the basis of COSMO-RS calculations, and F-gas absorption equilibrium isotherms were measured using gravimetric and volumetric methods. Experimental results are in good agreement with COSMO-RS predictions, with the ionic liquid tributyl(ethyl)phosphonium diethyl phosphate, [P2444][C2C2PO4], being the salt presenting the highest absorption capacities in molar and mass units compared to salts previously tested. The other two ionic liquids selected, trihexyltetradecylphosphonium glycinate, [P66614][C2NO2], and trihexyl(tetradecyl)phosphonium 2-cyano-pyrrole, [P66614][CNPyr], may be competitive as far as their absorption capacities are concerned. Future works will be guided on evaluating the performance of these ionic liquids at an industrial scale by means of process simulations, in order to elucidate the role in process efficiency of other relevant absorbent properties such as viscosity, molar weight, or specific heat.
| S-EPMC9069701 | biostudies-literature
Project description:Ionic liquids (ILs) are effective in pretreating cellulose for enhanced enzymatic saccharification, however ILs can inactivate cellulases. To guide the selection of ILs, the activity of cellulase was correlated with COSMO-RS calculations and descriptors of ILs including hydrogen bond (H-bond) basicity/acidity, polarity and ion size. Trends were deduced using an anion-series and a cation-series of ionic liquids in aqueous solutions. The activity in the cation-series was best correlated with the size of varied cations, whereas the activity in the anion-series showed a pronounced correlation to H-bond basicity and polarity of different anions. COSMO-RS was further used to predict the solubility of cellulose in ILs, which was correlated with cellulase activity on IL-pretreated cellulose. The best correlations were found between the enzyme activity in the anion-series ILs and the logarithmic activity coefficients, the H-bond energy, H-bond basicity and polarizability, underlining that the anion plays a crucial role in cellulose dissolution.
| S-EPMC6877754 | biostudies-literature
Project description:The utilization of biomass resources has attracted more and more attention due to the consumption of non-renewable resources. Compared with cellulose and lignin, hemicellulose has been less studied. Some ionic liquids (ILs) have been proved to be excellent solvents for lignocellulosic pretreatment. However, screening of more efficient ILs is difficult due to numerous possible ILs. Computational chemistry has been proved effective in solvent screening, but a precise model is indispensable. In this work, we focused on building several appropriate models and selected the most suitable one. According to the structure of hemicellulose, six hemicellulose models were constructed and the mid-dimer of the xylan chain hemicellulose (MDXC) model was proved to be the best compared with the reported experimental results. Based on the MDXC model, 1368 ILs were screened to evaluate their ability to dissolve hemicellulose by Conductor-like Screening Model for Real Solvents (COSMO-RS). The activity coefficient (γ), excess enthalpy (HE), and σ-profile indicated that the hydrogen-bond (H-bond) played a vital role in the dissolution of hemicellulose. Anions played a more critical role than cations, where small anions with H-bond acceptor groups could enhance the molecular interactions with hemicellulose. This work provided a thermodynamic understanding of hemicellulose and IL solvent systems. It highlights the importance of building appropriate solute models, which may be necessary to predict of the other thermodynamic properties in the future.
| S-EPMC9169070 | biostudies-literature
Project description:An automated computational framework (MoDoop) was developed to predict the biopolymer solubilities in ionic liquids (ILs) on the basis of conductor-like screening model for real solvents calculations of two thermodynamic properties: logarithmic activity coefficient (ln γ) at infinite dilution and excess enthalpy (H E) of mixture. The calculation was based on the optimized two-dimensional structures of biopolymer models and ILs by searching the lowest-energy conformer and optimizing molecular geometry. Three lignin models together with one IL dataset were used to evaluate the prediction ability of the developed method. The evaluation results show that ln γ is a more reliable property to predict lignin solubilities in ILs and the p-coumaryl alcohol model is considered as the best model to represent lignin molecules. The developed MoDoop approach is efficient for rapid in silico screening of suitable ionic liquids to dissolve biopolymers.
| S-EPMC6648271 | biostudies-literature
Project description:Due to environmental concerns, more attention has been given to the development of bio-based materials for substitution of fossil-based ones. Moreover, paper use is essential in daily routine and several applications of industrial pulp can be developed. In this study, transparent films were produced by industrial cellulose pulp solubilization in tetramethylguanidine based ionic liquids followed by its regeneration. Films were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), UV/Vis spectroscopy, proton nuclear magnetic resonance (1H-NMR), dynamic scanning calorimetry (DSC), thermal analysis (TG), and X-ray diffraction (XRD). Mechanical tests showed that films have a good elongation property, up to 50%, depending on ionic liquid incorporation. The influence of the conjugated acid and dissolution temperature on mechanical properties were evaluated. These results revealed the potential of this methodology for the preparation of new biobased films.
| S-EPMC8199285 | biostudies-literature
Project description:Omega-3 poly unsaturated fatty acids (PUFA) particularly eicosapentaenoic acid (EPA), and docosahexaenoic acid (DHA), have many health benefits including reducing the risk of cancer and cardiovascular disease. Recently, the use of ionic liquids (ILs) in lipid extraction from microalgae provides the potential to overcome common drawbacks, offers several other benefits. To date, very limited researches are available to focus on extracting microalgae lipid and PUFA in particular by using ILs. The objective of current work is to screen the potential ILs that can be applied in EPA extraction. In this study, fast ILs screening was performed with the help of a conductor like screening model for real solvents (COSMO-RS) and the ILs with higher capacity values for use in extraction of EPA were compared. According to the results, the highest capacity for EPA extraction among 352 screened cation/anion combinations belongs to [TMAm][SO₄]. It is expected to achieve a higher yield of EPA once applying this combination as the solvent in the process of extraction. ILs with small anions were observed to have higher capacities, as well possessing higher charge density compared to larger ones, and therefore, they are more preferable for extraction purposes. Moreover, shorter alkyl chain cations are preferred when using imidazolium-based IL, which agrees with experimental data.
| S-EPMC6412376 | biostudies-literature
Project description:Polyoxometalate-based ionic liquid hybrid materials with a pyridinium cation, containing Brönsted acid sites, were synthesized and used as catalysts for the oxidation of model and real diesel fuels. Keggin-type polyoxometalates with the formulae [PMo12O40]3-, [PVMo11O40]4-, [PV2Mo10O40]4-, [PW12O40]3- were used as anions. It was shown that increasing the acid site strength leads to an increase of dibenzothiophene conversion to the corresponding sulfone. The best results were obtained in the presence of a catalyst, containing a nicotinic acid derivative as cation and phosphomolybdate as anion. The main factors affecting the process consisting of catalyst dosage, temperature, reaction time, oxidant dosage were investigated in detail. Under optimal conditions full oxidation of dibenzothiophene and more than a 90% desulfurization degree of real diesel fuel (initial sulfur content of 2050 ppm) were obtained (the oxidation conditions: NK-1 catalyst, molar ratio H2O2:S 10:1, molar ratio S:Mo 8:1, 1 mL MeCN, 70 °C, 1 h). The synthesized catalysts could be used five times with a slight decrease in activity.
| S-EPMC7037028 | biostudies-literature
Project description:This study performs a screening of potential Ionic Liquids (ILs) for the extraction of Docosahexaenoic Acid (DHA) compounds by the calculation of capacity values. For this purpose, a Conductor-Like Screening Model for Real Solvents (COSMO-RS) was employed to study the molecular structures of the ILs, and therefore, predict their extraction potential. The capacity values of 22 anions combined with 16 cations based ILs, were investigated to evaluate the effectiveness of ILs in the extraction of DHA. It was found that among the investigated ILs, a combination of tetramethyl ammonium with SO4 or Cl was the best fit for DHA extraction, followed by pyrrolidinium, imidazolium, pyridinium and piperidinium. Furthermore, it was observed that the extraction capacity and the selectivity of ILs decreased with an increase in alkyl chain length; therefore, ethyl chain-ILs, with the shortest chain lengths, were found to be most suitable for DHA extraction. The predicted results were validated through the experimentally calculated extraction yield of a DHA compound from Nannochloropsis sp. Microalgae. Five selected ILs, namely [EMIM][Cl], [BMIM][Cl], [TMAm][Cl], [EMPyr][Br] and [EMPyrro][Br], were selected from COSMO-RS for empirical extraction purposes, and the validation results pinpointed the good prediction capabilities of COSMO-RS. The findings in this study can simplify the process of selecting suitable ILs for DHA extraction and reduce the number of required empirical evaluations.
| S-EPMC7464090 | biostudies-literature
Project description:To predict the partial molar excess enthalpy, entropy at infinite dilution, and phase equilibria, the availability of an infinite dilution activity coefficient is vital. The "quantitative structure-activity/property relationship" (QSAR/QSPR) approach has been used for the prediction of infinite dilution activity coefficient of water in ionic liquids using an extensive data set. The data set comprised 380 data points including 68 unique ILs at a wide range of temperatures, which is more extensive than previously published data sets. Moreover, new predictive QSAR/QSPR models including novel molecular descriptors, called "COSMO-RS descriptors", have been developed. Using two different techniques of external validation, the data set was divided to the training set for the development of models and to the validation set for external validation. Unlike former available models, internal validation using leave one/multi out-cross validations (LOO-CV/LMO-CV) and Y-scrambling methods were performed on the models using statistical parameters for further assessment. According to the obtained results of statistical parameters (R2 = 0.99 and Q2LOO-CV = 0.99), the predictive capability of the developed QSPR model was excellent for training set. Regarding the external validation, other statistical parameters such as AAD = 0.283 and AARD % = 30 were also satisfactory for the validation set. While the values of γH2O∞ increase or decrease with increasing temperature, the QSAR/QSPR models based on the van't Hoff equation takes into account the negative and positive effects of temperature on the γH2O∞ in ILs well, depending on the nature of ILs. It was also shown that γH2O∞ in some new ILs which had not been experimentally studied before can be predicted using the QSPR model.
| S-EPMC11898046 | biostudies-literature
Project description:Process simulation is a useful tool that has been widely used to analyze, design and optimize energy balances in chemical technologies including those related to biomass processing, biorefinery processes and chemical engineering. The presented data set serves as basis for the simulation of chitin purification, nanofibers and nanocrystals production processes, considering laboratory experimental procedures described in previous experimental articles.
| S-EPMC6153148 | biostudies-literature