Genome-Wide Association Study to Identify QTL for Carcass Traits in Korean Hanwoo Cattle
Ontology highlight
ABSTRACT:
SUBMITTER: Alam M
PROVIDER: S-EPMC10486602 | biostudies-literature | 2023 Aug
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:This genome-wide association study (GWAS) was conducted to identify major loci that are significantly associated with carcass weight, and their effects, in order to provide increased understanding of the genetic architecture of carcass weight in Hanwoo. This genome-wide association study identified one major chromosome region ranging from 23 Mb to 25 Mb on chromosome 14 as being associated with carcass weight in Hanwoo. Significant Bonferroni-corrected genome-wide associations (P<1.52×10(-6)) were detected for 6 Single Nucleotide Polymorphic (SNP) loci for carcass weight on chromosome 14. The most significant SNP was BTB-01280026 (P = 4.02×10(-11)), located in the 25 Mb region on Bos taurus autosome 14 (BTA14). The other 5 significant SNPs were Hapmap27934-BTC-065223 (P = 4.04×10(-11)) in 25.2 Mb, BTB-01143580 (P = 6.35×10(-11)) in 24.3 Mb, Hapmap30932-BTC-011225 (P = 5.92×10(-10)) in 24.8 Mb, Hapmap27112-BTC-063342 (P = 5.18×10(-9)) in 25.4 Mb, and Hapmap24414-BTC-073009 (P = 7.38×10(-8)) in 25.4 Mb, all on BTA 14. One SNP (BTB-01143580; P = 6.35×10(-11)) lies independently from the other 5 SNPs. The 5 SNPs that lie together showed a large Linkage disequilibrium (LD) block (block size of 553 kb) with LD coefficients ranging from 0.53 to 0.89 within the block. The most significant SNPs accounted for 6.73% to 10.55% of additive genetic variance, which is quite a large proportion of the total additive genetic variance. The most significant SNP (BTB-01280026; P = 4.02×10(-11)) had 16.96 kg of allele substitution effect, and the second most significant SNP (Hapmap27934-BTC-065223; P = 4.04×10(-11)) had 18.06 kg of effect on carcass weight, which correspond to 44% and 47%, respectively, of the phenotypic standard deviation for carcass weight in Hanwoo cattle. Our results demonstrated that carcass weight was affected by a major Quantitative Trait Locus (QTL) with a large effect and by many SNPs with small effects that are normally distributed.
| S-EPMC3792095 | biostudies-literature
Project description:Quantitative traits are usually controlled by numerous genomic variants with small individual effects, and variances associated with those traits are explained in a continuous manner. However, the relative contributions of genomic regions to observed genetic variations have not been well explored using sequence level single nucleotide polymorphism (SNP) information. Here, imputed sequence level SNP data (11,278,153 SNPs) of 2109 Hanwoo steers (Korean native cattle) were partitioned according to functional annotation, chromosome, and minor allele frequency (MAF). Genomic relationship matrices (GRMs) were constructed for each classified region and fitted in the model both separately and together for carcass weight (CWT), eye muscle area (EMA), backfat thickness (BFT), and marbling score (MS) traits. A genome-wide association study (GWAS) was performed to identify significantly associated variants in genic and exon regions using a linear mixed model, and the genetic contribution of each exonic SNP was determined using a Bayesian mixture model. Considering all SNPs together, the heritability estimates for CWT, EMA, BFT, and MS were 0.57 ± 0.05, 0.46 ± 0.05, 0.45 ± 0.05, and 0.49 ± 0.05, respectively, which reflected substantial genomic contributions. Joint analysis revealed that the variance explained by each chromosome was proportional to its physical length with weak linear relationships for all traits. Moreover, genomic variances explained by functional category and MAF class differed greatly among the traits studied in joint analysis. For example, exon regions had larger contributions for BFT (0.13 ± 0.08) and MS (0.22 ± 0.08), whereas intron and intergenic regions explained most of the total genomic variances for CWT and EMA (0.22 ± 0.09-0.32 ± 0.11). Considering different functional classes of exon regions and the per SNP contribution revealed the largest proportion of genetic variance was attributable to synonymous variants. GWAS detected 206 and 27 SNPs in genic and exon regions, respectively, on BTA4, BTA6, and BTA14 that were significantly associated with CWT and EMA. These SNPs were harbored by 31 candidate genes, among which TOX, FAM184B, PPARGC1A, PRKDC, LCORL, and COL1A2 were noteworthy. BayesR analysis found that most SNPs (>93%) had very small effects and the 4.02-6.92% that had larger effects (10-4 × σA2 , 10-3 × σA2 , and 10-2 × σA2 ) explained most of the total genetic variance, confirming polygenic components of the traits studied.
| S-EPMC6024024 | biostudies-literature
Project description:Hanwoo, is the most popular native beef cattle in South Korea. Due to its extensive popularity, research is ongoing to enhance its carcass quality and marbling traits. In this study we conducted a haplotype-based genome-wide association study (GWAS) by constructing haplotype blocks by three methods: number of single nucleotide polymorphisms (SNPs) in a haplotype block (nsnp), length of genomic region in kb (Len) and linkage disequilibrium (LD). Significant haplotype blocks and genes associated with them were identified for carcass traits such as BFT (back fat thickness), EMA (eye Muscle area), CWT (carcass weight) and MS (marbling score). Gene-set enrichment analysis and functional annotation of genes in the significantly-associated loci revealed candidate genes, including PLCB1 and PLCB4 present on BTA13, coding for phospholipases, which might be important candidates for increasing fat deposition due to their role in lipid metabolism and adipogenesis. CEL (carboxyl ester lipase), a bile-salt activated lipase, responsible for lipid catabolic process was also identified within the significantly-associated haplotype block on BTA11. The results were validated in a different Hanwoo population. The genes and pathways identified in this study may serve as good candidates for improving carcass traits in Hanwoo cattle.
| S-EPMC7290854 | biostudies-literature
Project description:Significant SNPs associated with Warner-Bratzler (WB) shear force and sensory traits were confirmed for Hanwoo beef (Korean cattle). A Bonferroni-corrected genome-wide significant association (p<1.3×10(-6)) was detected with only one single nucleotide polymorphism (SNP) on chromosome 5 for WB shear force. A slightly higher number of SNPs was significantly (p<0.001) associated with WB shear force than with other sensory traits. Further, 50, 25, 29, and 34 SNPs were significantly associated with WB shear force, tenderness, juiciness, and flavor likeness, respectively. The SNPs between p = 0.001 and p = 0.0001 thresholds explained 3% to 9% of the phenotypic variance, while the most significant SNPs accounted for 7% to 12% of the phenotypic variance. In conclusion, because WB shear force and sensory evaluation were moderately affected by a few loci and minimally affected by other loci, further studies are required by using a large sample size and high marker density.
| S-EPMC4150200 | biostudies-literature
Project description:The importance of meat and carcass quality is growing in beef cattle production to meet both producer and consumer demands. Primal cut yields, which reflect the body compositions of carcass, could determine the carcass grade and, consequently, command premium prices. Despite its importance, there have been few genome-wide association studies on these traits. This study aimed to identify genomic regions and putative candidate genes related to 10 primal cut traits, including tenderloin, sirloin, striploin, chuck, brisket, top round, bottom round, shank, flank, and rib in Hanwoo cattle using a single-step Bayesian regression (ssBR) approach. After genomic data quality control, 43,987 SNPs from 3,745 genotyped animals were available, of which 3,467 had phenotypic records for the analyzed traits. A total of 16 significant genomic regions (1-Mb window) were identified, of which five large-effect quantitative trait loci (QTLs) located on chromosomes 6 at 38-39 Mb, 11 at 21-22 Mb, 14 at 6-7 Mb and 26-27 Mb, and 19 at 26-27 Mb were associated with more than one trait, while the remaining 11 QTLs were trait-specific. These significant regions were harbored by 154 genes, among which TOX, FAM184B, SPP1, IBSP, PKD2, SDCBP, PIGY, LCORL, NCAPG, and ABCG2 were noteworthy. Enrichment analysis revealed biological processes and functional terms involved in growth and lipid metabolism, such as growth (GO:0040007), muscle structure development (GO:0061061), skeletal system development (GO:0001501), animal organ development (GO:0048513), lipid metabolic process (GO:0006629), response to lipid (GO:0033993), metabolic pathways (bta01100), focal adhesion (bta04510), ECM-receptor interaction (bta04512), fat digestion and absorption (bta04975), and Rap1 signaling pathway (bta04015) being the most significant for the carcass primal cut traits. Thus, identification of quantitative trait loci regions and plausible candidate genes will aid in a better understanding of the genetic and biological mechanisms regulating carcass primal cut yields.
| S-EPMC8662546 | biostudies-literature
Project description:The meat market has enormous importance for the world economy, and the quality of the product offered to the consumer is fundamental for the success of the sector. In this study, we analyzed a database which contained information on 2470 animals from a commercial farm in the state of São Paulo, Brazil. Of this total, 2181 animals were genotyped, using 777,962 single-nucleotide polymorphisms (SNPs). After quality control analysis, 468,321 SNPs provided information on the number of genotyped animals. Genome-wide association analyses (GWAS) were performed for the characteristics of the rib eye area (REA), subcutaneous fat thickness (SFT), shear force at 7 days' ageing (SF7), and intramuscular fat (IMF), with the aid of the single-step genomic best linear unbiased prediction (ssGBLUP) method, with the purpose of identifying possible genomic windows (~1 Mb) responsible for explaining at least 0.5% of the genetic variance of the traits under analysis (≥0.5%). These genomic regions were used in a gene search and enrichment analyses using MeSH terms. The distributed heritability coefficients were 0.14, 0.20, 0.18, and 0.21 for REA, SFT, SF7, and IMF, respectively. The GWAS results indicated significant genomic windows for the traits of interest in a total of 17 chromosomes. Enrichment analyses showed the following significant terms (FDR ≤ 0.05) associated with the characteristics under study: for the REA, heat stress disorders and life cycle stages; for SFT, insulin and nonesterified fatty acids; for SF7, apoptosis and heat shock proteins (HSP27); and for IMF, metalloproteinase 2. In addition, KEGG (Kyoto encyclopedia of genes and genomes) enrichment analysis allowed us to highlight important metabolic pathways related to the studied phenotypes, such as the growth hormone synthesis, insulin-signaling, fatty acid metabolism, and ABC transporter pathways. The results obtained provide a better understanding of the molecular processes involved in the expression of the studied characteristics and may contribute to the design of selection strategies and future studies aimed at improving the productivity of Nellore cattle.
| S-EPMC10818672 | biostudies-literature
Project description:The purpose of this study was to identify genomic regions associated with carcass traits in an experimental Nelore cattle population. The studied data set contained 2,306 ultrasound records for longissimus muscle area (LMA), 1,832 for backfat thickness (BF), and 1,830 for rump fat thickness (RF). A high-density SNP panel (BovineHD BeadChip assay 700k, Illumina Inc., San Diego, CA) was used for genotyping. After genomic data quality control, 437,197 SNPs from 761 animals were available, of which 721 had phenotypes for LMA, 669 for BF, and 718 for RF. The SNP solutions were estimated using a single-step genomic BLUP approach (ssGWAS), which calculated the variance for windows of 50 consecutive SNPs and the regions that accounted for more than 0.5% of the additive genetic variance were used to search for candidate genes. The results indicated that 12, 18, and 15 different windows were associated to LMA, BF, and RF, respectively. Confirming the polygenic nature of the studied traits, 43, 65, and 53 genes were found in those associated windows, respectively for LMA, BF, and RF. Among the candidate genes, some of them, which already had their functions associated with the expression of energy metabolism, were found associated with fat deposition in this study. In addition, ALKBH3 and HSD17B12 genes, which are related in fibroblast death and metabolism of steroids, were found associated with LMA. The results presented here should help to better understand the genetic and physiologic mechanism regulating the muscle tissue deposition and subcutaneous fat cover expression of Zebu animals. The identification of candidate genes should contribute for Zebu breeding programs in order to consider carcass traits as selection criteria in their genetic evaluation.
| S-EPMC5261778 | biostudies-literature
Project description:OBJECTIVE:This study evaluated the effect of pedigree errors (PEs) on the accuracy of estimated breeding value (EBV) and genetic gain for carcass traits in Korean Hanwoo cattle. METHODS:The raw data set was based on the pedigree records of Korean Hanwoo cattle. The animals' information was obtained using Hanwoo registration records from Korean animal improvement association database. The record comprised of 46,704 animals, where the number of the sires used was 1,298 and the dams were 38,366 animals. The traits considered were carcass weight (CWT), eye muscle area (EMA), back fat thickness (BFT), and marbling score (MS). Errors were introduced in the pedigree dataset through randomly assigning sires to all progenies. The error rates substituted were 5%, 10%, 20%, 30%, 40%, 50%, 60%, 70%, and 80%, respectively. A simulation was performed to produce a population of 1,650 animals from the pedigree data. A restricted maximum likelihood based animal model was applied to estimate the EBV, accuracy of the EBV, expected genetic gain, variance components, and heritability (h2) estimates for carcass traits. Correlation of the simulated data under PEs was also estimated using Pearson's method. RESULTS:The results showed that the carcass traits per slaughter year were not consistent. The average CWT, EMA, BFT, and MS were 342.60 kg, 78.76 cm2, 8.63 mm, and 3.31, respectively. When errors were introduced in the pedigree, the accuracy of EBV, genetic gain and h2 of carcass traits was reduced in this study. In addition, the correlation of the simulation was slightly affected under PEs. CONCLUSION:This study reveals the effect of PEs on the accuracy of EBV and genetic parameters for carcass traits, which provides valuable information for further study in Korean Hanwoo cattle.
| S-EPMC7322652 | biostudies-literature
Project description:The genomic best linear unbiased prediction (GBLUP) method has been widely used in routine genomic evaluation as it assumes a common variance for all single nucleotide polymorphism (SNP). However, this is unlikely in the case of traits influenced by major SNP. Hence, the present study aimed to improve the accuracy of GBLUP by using the weighted GBLUP (WGBLUP), which gives more weight to important markers for various carcass traits of Hanwoo cattle, such as backfat thickness (BFT), carcass weight (CWT), eye muscle area (EMA), and marbling score (MS). Linear and different nonlinearA SNP weighting procedures under WGBLUP were evaluated and compared with unweighted GBLUP and traditional pedigree-based methods (PBLUP). WGBLUP methods were assessed over ten iterations. Phenotypic data from 10,215 animals from different commercial herds that were slaughtered at approximately 30-month-old of age were used. All these animals were genotyped using Illumina Bovine 50k SNP chip and were divided into a training and a validation population by birth date on 1 November 2015. Genomic prediction accuracies obtained in the nonlinearA weighting methods were higher than those of the linear weighting for all traits. Moreover, unlike with linear methods, no sudden drops in the accuracy were noted after the peak was reached in nonlinearA methods. The average accuracies using PBLUP were 0.37, 0.49, 0.40, and 0.37, and 0.62, 0.74, 0.67, and 0.65 using GBLUP for BFT, CWT, EMA, and MS, respectively. Moreover, these accuracies of genomic prediction were further increased to 4.84% and 2.70% for BFT and CWT, respectively by using the nonlinearA method under the WGBLUP model. For EMA and MS, WGBLUP was as accurate as GBLUP. Our results indicate that the WGBLUP using a nonlinearA weighting method provides improved predictions for CWT and BFT, suggesting that the ability of WGBLUP over the other models by weighting selected SNPs appears to be trait-dependent.
| S-EPMC6947347 | biostudies-literature
Project description:The discovery of single nucleotide polymorphisms (SNP) and the subsequent genotyping of large numbers of animals have enabled large-scale analyses to begin to understand the biological processes that underpin variation in animal populations. In beef cattle, genome-wide association studies using genotype arrays have revealed many quantitative trait loci (QTL) for various production traits such as growth, efficiency and meat quality. Most studies regarding meat quality have focused on marbling, which is a key trait associated with meat eating quality. However, other important traits like meat color, texture and fat color have not commonly been studied. Developments in genome sequencing technologies provide new opportunities to identify regions associated with these traits more precisely. The objective of this study was to estimate variance components and identify significant variants underpinning variation in meat quality traits using imputed whole genome sequence data. Phenotypic and genomic data from 2,110 Hanwoo cattle were used. The estimated heritabilities for the studied traits were 0.01, 0.16, 0.31, and 0.49 for fat color, meat color, meat texture and marbling score, respectively. Marbling score and meat texture were highly correlated. The genome-wide association study revealed 107 significant SNPs located on 14 selected chromosomes (one QTL region per selected chromosome). Four QTL regions were identified on BTA2, 12, 16, and 24 for marbling score and two QTL regions were found for meat texture trait on BTA12 and 29. Similarly, three QTL regions were identified for meat color on BTA2, 14 and 24 and five QTL regions for fat color on BTA7, 10, 12, 16, and 21. Candidate genes were identified for all traits, and their potential influence on the given trait was discussed. The significant SNP will be an important inclusion into commercial genotyping arrays to select new breeding animals more accurately.
| S-EPMC6895209 | biostudies-literature