Artificial intelligence planning and 3D printing augmented modules in the treatment of a complicated hip joint revision: a case report.
Ontology highlight
ABSTRACT:
SUBMITTER: Liu Y
PROVIDER: S-EPMC10546305 | biostudies-literature | 2023
REPOSITORIES: biostudies-literature
Publications
Artificial intelligence planning and 3D printing augmented modules in the treatment of a complicated hip joint revision: a case report.
Liu Yikai Y Zhang Zian Z Wang Wenzhe W Yu Chaoqun C Liu Chang C Huang Zhenchao Z Xu Kaige K Zhang Haining H
Frontiers in surgery 20230919
Total hip revision with osseous defects can be very difficult. Artificial intelligence offers preoperative planning, real-time measurement, and intraoperative judgment, which can guide prothesis placement more accurately. Three-dimensional printed metel augment modules which are made according to the individualized osseous anatomy, can fit the osseous defects well and provide mechanical support. In this case, we used AI to plan the size and position of the acetabular cup and 3D-printed augmented ...[more]
Similar Datasets
Project description:SignificanceMany bad decisions and their devastating consequences could be avoided if people used optimal decision strategies. Here, we introduce a principled computational approach to improving human decision making. The basic idea is to give people feedback on how they reach their decisions. We develop a method that leverages artificial intelligence to generate this feedback in such a way that people quickly discover the best possible decision strategies. Our empirical findings suggest that a principled computational approach leads to improvements in decision-making competence that transfer to more difficult decisions in more complex environments. In the long run, this line of work might lead to apps that teach people clever strategies for decision making, reasoning, goal setting, planning, and goal achievement.
| S-EPMC8944825 | biostudies-literature
Project description:BackgroundAnemia is highly prevalent in patients before hip joint revision surgery (HJRS) and is associated with an increased complication rate. This paper is the first to investigate costs, real diagnosis-related group (DRG) revenues and case coverage of preoperative anemia in elective HJRS.MethodsMedical data, transfusions, costs, and revenues of all patients undergoing HJRS at two campuses of the Charité -Universitätsmedizin Berlin between 2010 and 2017 were used for subgroup analyses and linear regressions.ResultsOf 1187 patients included 354 (29.8%) showed preoperative anemia. A total of 565 (47.6%) patients were transfused with a clear predominance of anemic patients (72.6% vs. 37.0%, p < 0.001). Costs (12,318€ [9027;20,044€] vs. 8948€ [7501;11,339€], p < 0.001) and revenues (11,788€ [8992;16,298€] vs. 9611€ [8332;10,719€], p < 0.001) were higher for preoperatively anemic patients and the coverage was deficient (-1170€ [-4467;1238€] vs. 591€ [-1441;2103€], p < 0.001). In anemic patients, case contribution margins decreased with increasing transfusion rates (p ≤ 0.001). Comorbidities had no significant economic impact.ConclusionPreoperative anemia and perioperative transfusions in HJRS are associated with increased treatment costs and a financial undercoverage for healthcare providers and health insurance companies. Concepts for the treatment of preoperative anemia (e.g. patient blood management) could reduce treatment costs in the medium term.
| S-EPMC9852200 | biostudies-literature
Project description:The service life of an artificial hip joint is limited to 10-15 years, which is not ideal for young patients. To extend the lifespan of these prostheses, the coefficient of friction and wear resistance of metallic femoral heads must be improved. In this study, a Cu-doped titanium nitride (TiNX -Cu) film with "autoantifriction" properties is deposited on a CoCrMo alloy via magnetron sputtering. When delivered in a protein-containing lubricating medium, the Cu in TiNX -Cu quickly and consistently binds to the protein molecules in the microenvironment, resulting in the formation of a stable protein layer. The proteins adsorbed on the TiNX -Cu surface decompose into hydrocarbon fragments owing to the shear stress between the Al2 O3 /TiNX -Cu tribopair. The synergistic effect of the catalysis of Cu and shear stress between the Al2 O3 /TiNX -Cu tribopair transforms these fragments into graphite-like carbon tribofilms with an antifriction property. These tribofilms can simultaneously reduce the friction coefficient of the Al2 O3 /TiNX -Cu tribopair and enhance the wear resistance of the TiNX -Cu film. Based on these findings, it is believed that the autoantifriction film can drive the generation of antifriction tribofilms for lubricating and increasing the wear resistance of prosthetic devices, thereby prolonging their lifespan.
| S-EPMC10477871 | biostudies-literature
Project description:A hatching-distance-controlled lattice of 65.1Co28.2Cr5.3Mo is additively manufactured via laser powder bed fusion with a couple of periodic and aperiodic arrangements of nodes and struts. Thus, the proposed lattice has an amorphous-inspired structure in the short- and long-range orders. From the structural perspective, an artificial intelligence algorithm is used to effectively align lattices with various hatching distances. Then, the metastable lattice combination exhibits an unexpectedly high specific compression strength that is only slightly below that of a solid structure. From the microstructural perspective, the nodes in the newly designed lattice, where the thermal energy from laser irradiation is mainly concentrated, exhibit an equiaxial microstructure. By contrast, the struts exhibit a columnar microstructure, thereby allowing the thermal energy to pass through the narrow ligaments. The heterogeneous phase differences between the nodal and strut areas explain the strength-deteriorating mechanism, owing to the undesirable multi-phase development in the as-built state. However, solid-solution heat treatment to form a homogeneous phase bestows even higher specific compression strength. Furthermore, electrochemical leaching leads to the formation of nanovesicles on the surface of the microporous lattice system, thereby leading to a large surface area. A more advanced valve cage for use in a power plant is designed by using artificial intelligence both to (i) effectively preserve its mechanical stiffness and (ii) actively dissipate the generated stress through the large surface area provided by the nanovesicles.Supplementary informationThe online version contains supplementary material available at 10.1007/s42114-024-01039-6.
| S-EPMC11627464 | biostudies-literature
Project description:BackgroundOntologies are fundamental components of informatics infrastructure in domains such as biomedical, environmental, and food sciences, representing consensus knowledge in an accurate and computable form. However, their construction and maintenance demand substantial resources and necessitate substantial collaboration between domain experts, curators, and ontology experts. We present Dynamic Retrieval Augmented Generation of Ontologies using AI (DRAGON-AI), an ontology generation method employing Large Language Models (LLMs) and Retrieval Augmented Generation (RAG). DRAGON-AI can generate textual and logical ontology components, drawing from existing knowledge in multiple ontologies and unstructured text sources.ResultsWe assessed performance of DRAGON-AI on de novo term construction across ten diverse ontologies, making use of extensive manual evaluation of results. Our method has high precision for relationship generation, but has slightly lower precision than from logic-based reasoning. Our method is also able to generate definitions deemed acceptable by expert evaluators, but these scored worse than human-authored definitions. Notably, evaluators with the highest level of confidence in a domain were better able to discern flaws in AI-generated definitions. We also demonstrated the ability of DRAGON-AI to incorporate natural language instructions in the form of GitHub issues.ConclusionsThese findings suggest DRAGON-AI's potential to substantially aid the manual ontology construction process. However, our results also underscore the importance of having expert curators and ontology editors drive the ontology generation process.
| S-EPMC11484368 | biostudies-literature
Project description:BackgroundHip and knee arthroplasties are common and successful procedures, however, success and durability are not guaranteed. The revision burden, defined as the ratio of implant revisions to the total number of arthroplasties in a specific period, is a measure of the steady state of arthroplasty success in a given registry. This study examines the hypothesis that revision burden would be similar among contemporary joint replacement registries and improving over time compared with historic controls.MethodsWe evaluated the national joint registries of 5 health systems (Australian Orthopaedic Association National Joint Replacement Registry [AOANJRR]; National Joint Registry of England, Wales, Northern Ireland, and the Isle of Man; New Zealand Joint Registry [NZJR]; Swedish Hip Arthroplasty Register [SHAR] and Swedish Knee Arthroplasty Register [SKAR]; and the American Joint Replacement Registry [AJRR]) for hip and knee revision burden over the past 4 years or since registry inception. Historic controls were obtained from previously published reports.ResultsThe 2014 hip revision burden varied from 9.7 percent (NJR) to 11.9 percent (NZJR), and the unweighted average was 10.4 percent. The 2011, 2012, and 2013 mean hip revision burden was 11.9, 11.9, and 11.4 percent. The 2014 knee revision burden varied from to 6.0 percent (NJR) to 8.1 percent (AJRR), and the unweighted average for the 5 registries studied was 7.0 percent. The 2011, 2012, and 2013 mean knee revision burden was 6.9, 7.0, and 7.0 percent. Historically, the observed hip revision burden was 15.8 percent and the knee revision burden 8.0 percent.ConclusionsRevision burden has gradually decreased for hip replacements and has remained relatively constant for knee replacements both for the last 4 years and compared to historic controls. Knee revision burden was lower than hip revision burden for each period examined. Revision burden is one measure that may be helpful in following the effect of changes in surgical technique and implant design over time in registry populations and may be a helpful way to compare overall results between registries.
| S-EPMC4957265 | biostudies-literature
Project description:ObjectiveScalp electroencephalograms (EEGs) are critical for neurological evaluations, particularly in epilepsy, yet they demand specialized expertise that is often lacking in many regions. Artificial intelligence (AI) offers potential solutions to this gap. While existing AI models address certain aspects of EEG analysis, a fully automated system for routine EEG interpretation is required for effective epilepsy management and healthcare professionals' decision-making. This study aims to develop an AI-augmented model for automating EEG seizure tracking, thereby supporting a sustainable digital care pathway for epilepsy (DCPE). The goal is to improve patient monitoring, facilitate collaborative decision-making, ensure timely medication adherence, and promote patient compliance.MethodThe study proposes an AI-augmented framework using machine learning, focusing on quantitative analysis of EEG data to automate DCPE. A focus group discussion was conducted with healthcare professionals to find the problem of the current digital care pathway and assess the feasibility, usability, and sustainability of the AI-augmented system in the digital care pathway.ResultsThe study found that a combination of random forest with principal component analysis and support vector machines with KBest feature selection achieved high accuracy rates of 96.52% and 95.28%, respectively. Additionally, the convolutional neural networks model outperformed other deep learning algorithms with an accuracy of 97.65%. The focus group discussion revealed that automating the diagnostic process in digital care pathway could reduce the time needed to diagnose epilepsy. However, the sustainability of the AI-integrated framework depends on factors such as technological infrastructure, skilled personnel, training programs, patient digital literacy, financial resources, and regulatory compliance.ConclusionThe proposed AI-augmented system could enhance epilepsy management by optimizing seizure tracking accuracy, improving monitoring and timely interventions, facilitating collaborative decision-making, and promoting patient-centered care, thereby making the digital care pathway more sustainable.
| S-EPMC11459578 | biostudies-literature
Project description:ObjectivesGiven the complexity of temporomandibular joint disorders (TMDs) and their overlapping symptoms with other conditions, an accurate diagnosis necessitates a thorough examination, which can be time-consuming and resource-intensive. Consequently, innovative diagnostic tools are required to increase TMD diagnosis efficiency and precision. Therefore, the purpose of this umbrella review was to examine the existing evidence about the usefulness of artificial intelligence (AI) in TMD diagnosis.Material and methodsA comprehensive search of the literature was performed from inception to November 30, 2024, in PubMed-MEDLINE, Embase, and Scopus databases. This review evaluated systematic reviews (SRs) and meta-analyses (MAs) that reported TMD patients/datasets, any AI model as intervention, no treatment, placebo as comparator and accuracy, sensitivity, specificity, or predictive value of AI models as outcome. The extracted data were complemented with narrative synthesis.ResultsOut of 1497 search results, this umbrella review included five studies. One of the five articles was an SR while the other four were SRMAs. Three studies focused on patients with temporomandibular joint (TMJ) problems as a group, whereas two were specific to temporomandibular joint osteoarthritis (TMJOA). The included studies reported the use of imaging datasets as samples, including cone-beam computed tomography (CBCT), magnetic resonance imaging (MRI), and panoramic radiography. The studies reported an accuracy level ranging from 0.59 to 1. Four studies reported sensitivity levels ranging from 0.76 to 0.80. Four studies reported specificity values ranging from 0.63 to 0.95 for TMJ conditions. However, only one study provided the area under the curve (AUC) in the diagnosis of TMDs.ConclusionsAI has the ability to provide faster, more accurate, sensitive, and objective diagnosis of TMJ condition. However, the performance is determined on the AI models and datasets used. Therefore, before implementing AI models in clinical practice, it is essential for researchers to extensively refine and evaluate the AI application.
| S-EPMC11894261 | biostudies-literature
Project description:Three-dimensional printing is a valuable modality with broad clinical applications. Hip preservation surgery outcomes are dependent on correction of morphological abnormalities that may be optimally visualized with three-dimensional models. To assess the efficacy of three-dimensional models for patient and trainee education and to determine its benefits during pre-operative planning in hip preservation surgery. Sixteen patients with hip pathology were selected. Computed tomography was utilized to generate three-dimensional models. Customized Likert-style questionnaires were given to 10 hip preservation surgeons, 11 orthopedic surgery residents and 10 patients. All residents strongly agreed or agreed that the three-dimensional hip models helped them to understand patients' pathology. All but one patient agreed that the models assisted in their understanding of the treatment plan. Surgeons concurred that although they do not routinely order three-dimensional models, their use would improve trainee and patient education, especially when treating atypical osseous pathomorphologies. Three-dimensional models are tools that can help surgeon, trainee and patient understanding and participation in treatment of complex hip disorders. Patients and trainees agree that the prototypes enhanced their educational experience, as the surgeon can directly demonstrate complex morphological abnormalities. Trainees can therefore gain a better understanding of hip pathologies and treatment. As patients better understand their hip disorder, they can more fully participate in shared treatment decision-making.Level of evidenceLevel IV, Retrospective Case Series.
| S-EPMC6662895 | biostudies-literature
Project description:ObjectiveRespiratory symptoms are among the most common chief complaints of pediatric patients in the emergency department (ED). Point-of-care ultrasound (POCUS) outperforms conventional chest X-ray and is user-dependent, which can be challenging to novice ultrasound (US) users. We introduce a novel concept using artificial intelligence (AI)-enhanced pleural sweep to generate complete panoramic views of the lungs, and then assess its accuracy among novice learners (NLs) to identify pneumonia.MethodsPreviously healthy 0- to 17-year-old patients presenting to a pediatric ED with cardiopulmonary chief complaint were recruited. NLs received a 1-hour training on traditional lung POCUS and the AI-assisted software. Two POCUS-trained experts interpreted the images, which served as the criterion standard. Both expert and learner groups were blinded to each other's interpretation, patient data, and outcomes. Kappa was used to determine agreement between POCUS expert interpretations.ResultsSeven NLs, with limited to no prior POCUS experience, completed examinations on 32 patients. The average patient age was 5.53 years (±1.07). The median scan time of 7 minutes (minimum-maximum 3-43; interquartile 8). Three (8.8%) patients were diagnosed with pneumonia by criterion standard. Sensitivity, specificity, and accuracy for NLs AI-augmented interpretation were 66.7% (confidence interval [CI] 9.4-99.1%), 96.5% (CI 82.2-99.9%), and 93.7% (CI 79.1-99.2%). The average image quality rating was 2.94 (±0.16) out of 5 across all lung fields. Interrater reliability between expert sonographers was high with a kappa coefficient of 0.8.ConclusionThis study shows that AI-augmented lung US for diagnosing pneumonia has the potential to increase accuracy and efficiency.
| S-EPMC9790545 | biostudies-literature