Enhanced electrochemical performance of li-ion battery via ultrasonic-assisted inorganic-rich and thin SEI layer
Ontology highlight
ABSTRACT:
SUBMITTER: Jie S
PROVIDER: S-EPMC10550765 | biostudies-literature | 2023 Sep
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Nickel-rich layered oxides are one of the most promising positive electrode active materials for high-energy Li-ion batteries. Unfortunately, the practical performance is inevitably circumscribed by the structural deterioration deriving from the Ni/Li antisite disorder, leading to severe capacity loss and life attenuation. Herein, we propose an economical and facile rejuvenation strategy by employing the magneto-electrochemical synergistic activation targeting the positive electrode in assembled Li-ion batteries. This approach induces a transition of Ni3+ from high-spin to low-spin, reducing the super-exchange interaction of Ni-O-transition metal (TM). Meanwhile, electrochemical reaction drives Li+ from the host material and promotes Ni3+ to reoccupy TM layer, recovering intrinsic Li site and extending cycle life. The strategy demonstrates that low-quality positive electrodes can be converted to high-quality ones. Notably, the method can revitalize an aged Li-ion pouch cell (SiC||NCM811, 8 Ah nominal capacity) via optimizing cation occupancy and increase its capacity by 10% from 6.49 to 7.14 Ah at 1 C, illustrating the benefits of the upcycling process.
| S-EPMC11599583 | biostudies-literature
Project description:Sn-based oxide materials as an anode of lithium ion batteries (LIBs) suffer from the unavoidable mechanical stress originated from huge volume changes during lithiation/delithiation reactions. We synthesized the hierarchical SnO nanobranches (NBs) decorated with Sn nanoparticles on Cu current collector using a vapor transport method. The Sn-decorated SnO NBs as an anode of LIB showed good electrochemical performance with high reversible capacity retention of as high as 502 mAh/g and rate capability of 455 mAh/g at a current density of 2.0 A/g after 50 cycles. Through the morphological and crystal structure analyses after the charge and discharge processes, it was found that the morphology of Sn-decorated SnO NBs was transformed to nanoporous layered-structure, composed of Sn and lithium oxide, during the repeated lithiation/delithiation reactions. The free-volume of Sn-decorated SnO NBs and nanoporous layered-structure effectively accommodate the huge volume changes and enhance the electrochemical cyclability by facilitating the diffusion of Li-ions.
| S-EPMC5271146 | biostudies-literature
Project description:Replacing flammable organic electrolytes with aqueous electrolytes in lithium-ion batteries (LIB) can greatly enhance the safety of next-generation energy storage systems. With the extended electrochemical stability window of electrolytes, 'water-in-salt' (WIS) electrolytes containing LIB presented significant performance improvements. However, the solubility limits of lithium salts in water restrain the extent of kinetic protection offered by the high salt concentration. Here, we report design strategies of anode structure to improve the cycle life of LIB with WIS electrolytes. We introduced partially graphitic protective carbon layers on anode particles using a versatile coating method. This protective layer not only improved charge transfer kinetics but also minimized the exposure of anode surface for water electrolysis. The effectiveness of anode structure developed in this study was exemplified on TiO2 anodes, where cycle performance and coulombic efficiency improved by 11 times and 29% respectively over the base anode material.
| S-EPMC9048106 | biostudies-literature
Project description:The electrochemical potential difference (Δμ̅) is the driving force for the transfer of a charged species from one phase to another in a redox reaction. In Li-ion batteries (LIBs), Δμ̅ values for both electrons and Li-ions play an important role in the charge-transfer kinetics at the electrode/electrolyte interfaces. Because of the lack of suitable measurement techniques, little is known about how Δμ̅ affects the redox reactions occurring at the solid/liquid interfaces during LIB operation. Herein, we outline the relations between different potentials and show how ambient pressure photoelectron spectroscopy (APPES) can be used to follow changes in Δμ̅e over the solid/liquid interfaces operando by measuring the kinetic energy (KE) shifts of the electrolyte core levels. The KE shift versus applied voltage shows a linear dependence of ∼1 eV/V during charging of the electrical double layer and during solid electrolyte interphase formation. This agrees with the expected results for an ideally polarizable interface. During lithiation, the slope changes drastically. We propose a model to explain this based on charge transfer over the solid/liquid interface.
| S-EPMC8397238 | biostudies-literature
Project description:Modified Li-rich layered cathode Li(Li0.2Mn0.54Ni0.13Co0.13)O2 has been synthesized by a simple strategy of using surface treatment with various amounts (0-30 wt.%) of Super P (carbon black). Based on detailed characterizations from X-ray diffraction (XRD), high resolution transmission electron microscope (HRTEM), X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS), it is suggested that the phase transformation from Li2MnO3-type of structure to spinel-like phase take place at the surface regions of particles during post annealing process at 350 °C, leading to increase in both first coulombic efficiency and rate capability, from 78% and 100 mAh · g(-1) (charge capacity at 2500 mA · g(-1)) of the pristine material to 93.4% and 200 mAh · g(-1). The evidences of spinel formation and the reasons for electrochemical enhancement are systematically investigated.
| S-EPMC3813932 | biostudies-literature
Project description:Electrochemical energy storage plays a vital role in combating global climate change. Nowadays lithium-ion battery technology remains the most prominent technology for rechargeable batteries. A key performance-limiting factor of lithium-ion batteries is the active material of the positive electrode (cathode). Lithium- and manganese-rich nickel manganese cobalt oxide (LMR-NMC) cathode materials for Li-ion batteries are extensively investigated due to their high specific discharge capacities (>280 mAh/g). However, these materials are prone to severe capacity and voltage fade, which deteriorates the electrochemical performance. Capacity and voltage fade are strongly correlated with the particle morphology and nano- and microstructure of LMR-NMCs. By selecting an adequate synthesis strategy, the particle morphology and structure can be controlled, as such steering the electrochemical properties. In this manuscript we comparatively assessed the morphology and nanostructure of LMR-NMC (Li1.2Ni0.13Mn0.54Co0.13O2) prepared via an environmentally friendly aqueous solution-gel and co-precipitation route, respectively. The solution-gel (SG) synthesized material shows a Ni-enriched spinel-type surface layer at the {200} facets, which, based on our post-mortem high-angle annual dark-field scanning transmission electron microscopy and selected-area electron diffraction analysis, could partly explain the retarded voltage fade compared to the co-precipitation (CP) synthesized material. In addition, deviations in voltage fade and capacity fade (the latter being larger for the SG material) could also be correlated with the different particle morphology obtained for both materials.
| S-EPMC9268383 | biostudies-literature
Project description:The silicon oxide/graphite (SiO/C) composite anode represents one of the promising candidates for next generation Li-ion batteries over 400 Wh kg-1 . However, the rapid capacity decay and potential safety risks at low temperature restrict their widely practical applications. Herein, the fabrication of sulfide-rich solid electrolyte interface (SEI) layer on surface of SiO/C anode to boost the reversible Li-storage performance at low temperature is reported. Different from the traditional SEI layer, the present modification layer is composed of inorganic-organic hybrid components with three continuous layers as disclosed by time-of-flight secondary ion mass spectrometry (TOF-SIMS). The result shows that ROSO2 Li, ROCO2 Li, and LiF uniformly distribute over different layers. When coupled with LiNi0.8 Co0.1 Mn0.1 O2 cathode, the capacity retention achieves 73% at -20 °C. The first principle calculations demonstrate that the gradient adsorption of sulfide-rich surface layer and traditional intermediate layer can promote the desolvation of Li+ at low temperature. Meanwhile, the inner LiF-rich layer with rapid ionic diffusion capability can inhibit dendrite growth. These results offer new perspective of developing advanced SiO/C anode and low-temperature Li-ion batteries.
| S-EPMC9284185 | biostudies-literature
Project description:Lithium phosphorus oxynitride (LiPON) is a state-of-the-art solid electrolyte material for thin-film microbatteries. These applications require conformal thin films on challenging 3D surface structures, and among the advanced thin-film deposition techniques, atomic layer deposition (ALD) is believed to stand out in terms of producing appreciably conformal thin films. Here we quantify the conformality (i.e., the evenness of deposition) of thin ALD-grown LiPON films using lateral high-aspect-ratio test structures. Two different lithium precursors, lithium tert-butoxide (LiOtBu) and lithium bis(trimethylsilyl)amide (Li-HMDS), were investigated in combination with diethyl phosphoramidate as the source of oxygen, phosphorus, and nitrogen. The results indicate that the film growth proceeded significantly deeper into the 3D cavities for the films grown from LiOtBu, while the Li-HMDS-based films grew more evenly initially, right after the cavity entrances. These observations can be explained by differences in the precursor diffusion and reactivity. The results open possibilities for the use of LiPON as a solid electrolyte in batteries with high-surface-area electrodes. This could enable faster charging and discharging as well as the use of thin-film technology in fabricating thin-film electrodes of meaningful charge capacity.
| S-EPMC10976887 | biostudies-literature
Project description:The most simple and clear advantage of Na-ion batteries (NIBs) over Li-ion batteries (LIBs) is the natural abundance of Na, which allows inexpensive production of NIBs for large-scale applications. However, although strenuous research efforts have been devoted to NIBs particularly since 2010, certain other advantages of NIBs have been largely overlooked, for example, their low-temperature power and cycle performances. Herein, we present a comparative study of spirally wound full-cells consisting of Li0.1Na0.7Co0.5Mn0.5O2 (or Li0.8Co0.5Mn0.5O2) and hard carbon and report that the power of NIB at -30 °C is ∼21% higher than that of LIB. Moreover, the capacity retention in cycle testing at 0 °C is ∼53% for NIB but only ∼29% for LIB. Raman spectroscopy and density functional theory calculations revealed that the superior performance of NIB is due to the relatively weak interaction between Na+ ions and aprotic polar solvents.
| S-EPMC6640915 | biostudies-literature
Project description:As new, ever more energy-dense battery materials are being developed, it is becoming increasingly challenging for electrolytes to cater for both requirements set by the anode and cathode. Ethylene carbonate plays a key role in forming a stable solid-electrolyte-interphase on the graphite anodes, but in combination with nickel-rich cathodes, such as LiNi0.8Mn0.1Co0.1O2 (NMC811), it leads to excessive cathode oxygen loss at high voltage. In this work, the study proposes a cell design, where different electrolytes are compartmentalized in the anode and the cathode. An ionically conductive polymer electrolyte membrane is used to prevent two electrolytes from mixing. NMC811 versus graphite full cells using this electrolyte achieved a capacity retention of 85.1% over 520 cycles compared to 61.7% for control systems using a standard carbonate electrolyte under the same conditions. In addition, it is shown that cells using the compartmentalized electrolyte show less transition metal cross-over from the cathode to the anode and less impedance build-up during cycling. Overall, this cell design proposed in this work allows to independently optimize the anode and cathode electrolyte and holds the promise to better support the diverging electrolyte requirements of next-generation anodes and cathodes.
| S-EPMC11922014 | biostudies-literature