Exploring the Relationship Between Halide Substitution, Structural Disorder, and Lithium Distribution in Lithium Argyrodites (Li6–xPS5–xBr1+x)
Ontology highlight
ABSTRACT:
SUBMITTER:
PROVIDER: S-EPMC10569443 | biostudies-literature | 2023 Sep
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The rational development of fast-ion-conducting solid electrolytes for all-solid-state lithium-ion batteries requires understanding the key structural and chemical principles that give some materials their exceptional ionic conductivities. For the lithium argyrodites Li6PS5X (X = Cl, Br, or I), the choice of the halide, X, strongly affects the ionic conductivity, giving room-temperature ionic conductivities for X = {Cl,Br} that are ×103 higher than for X = I. This variation has been attributed to differing degrees of S/X anion disorder. For X = {Cl,Br}, the S/X anions are substitutionally disordered, while for X = I, the anion substructure is fully ordered. To better understand the role of substitutional anion disorder in enabling fast lithium-ion transport, we have performed a first-principles molecular dynamics study of Li6PS5I and Li6PS5Cl with varying amounts of S/X anion-site disorder. By considering the S/X anions as a tetrahedrally close-packed substructure, we identify three partially occupied lithium sites that define a contiguous three-dimensional network of face-sharing tetrahedra. The active lithium-ion diffusion pathways within this network are found to depend on the S/X anion configuration. For anion-disordered systems, the active site-site pathways give a percolating three-dimensional diffusion network; whereas for anion-ordered systems, critical site-site pathways are inactive, giving a disconnected diffusion network with lithium motion restricted to local orbits around S positions. Analysis of the lithium substructure and dynamics in terms of the lithium coordination around each sulfur site highlights a mechanistic link between substitutional anion disorder and lithium disorder. In anion-ordered systems, the lithium ions are pseudo-ordered, with preferential 6-fold coordination of sulfur sites. Long-ranged lithium diffusion would disrupt this SLi6 pseudo-ordering, and is, therefore, disfavored. In anion-disordered systems, the pseudo-ordered 6-fold S-Li coordination is frustrated because of Li-Li Coulombic repulsion. Lithium positions become disordered, giving a range of S-Li coordination environments. Long-ranged lithium diffusion is now possible with no net change in S-Li coordination numbers. This gives rise to superionic lithium transport in the anion-disordered systems, effected by a concerted string-like diffusion mechanism.
| S-EPMC8029578 | biostudies-literature
Project description:By varying the bromine content and cooling method, we are able to induce site disorder in the Li6-x PS5-x Br1+x (x = 0, 0.3, 0.5) system via two routes, allowing us to disentangle the impact of site disorder and chemical composition on conductivity. Through solid-state nuclear magnetic resonance (NMR), we can explore the chemical environment as well as short-range lithium-ion dynamics and compare these to results obtained from neutron diffraction and electrochemical impedance spectroscopy (EIS). We find that the cooling method has a profound effect on the 7Li and 31P environment that cannot be explained through 4d site disorder alone. The configurational entropy (S conf) is used as a more complete descriptor of structural disorder and linked to distortions in both the phosphorus and lithium environment. These distortions are correlated to increased intercage movement through 7Li T 1 spin-lattice relaxation (SLR) NMR. Further analysis of the prefactors obtained from SLR NMR and EIS allows us to obtain the migrational entropy (ΔS m). For short-range SLR movement, the ΔS m correlates well with S conf, implying that increased intercage movement is related to distortion of the lithium cages as well as a decrease of the intercage distance. Comparison to EIS shows that an increase in short-range movement translates into increased long-range movement in a straightforward manner for slow-cooled samples. However, for quench-cooled samples, this correlation is lost. Lattice softness and phonon-ion interactions are suggested to play an important role in long-range conduction which only becomes apparent when chemical composition and disorder are disentangled. This work shows that by altering one synthesis step, the relationship between site-occupancy-based descriptors (site disorder or S conf) and lithium dynamics is changed profoundly. Furthermore, it shows that chemical composition and descriptors of site disorder cannot be seen as one and the same, as both play a role that changes with the length scale probed. Finally, it challenges the implicit assumption that increased short-range diffusivity automatically results in increased long-range diffusivity.
| S-EPMC11823417 | biostudies-literature
Project description:Solid electrolytes have shown superior behavior and many advantages over liquid electrolytes, including simplicity in battery design. However, some chemical and structural instability problems arise when solid electrolytes form a direct interface with the negative Li-metal electrode. In particular, it was recognized that the interface between the β-Li3PS4 crystal and lithium anode is quite unstable and tends to promote structural defects that inhibit the correct functioning of the device. As a possible way out of this problem, we propose a material, Li2S, as a passivating coating for the Li/β-Li3PS4 interface. We investigated the mutual affinity between Li/Li2S and Li2S/β-Li3PS4 interfaces by DFT methods and investigated the structural stability through the adhesion energy and mechanical stress. Furthermore, a topological analysis of the electron density identified preferential paths for the migration of Li ions.
| S-EPMC10753886 | biostudies-literature
Project description:Argyrodite is a key structure type for ion-transporting materials. Oxide argyrodites are largely unexplored despite sulfide argyrodites being a leading family of solid-state lithium-ion conductors, in which the control of lithium distribution over a wide range of available sites strongly influences the conductivity. We present a new cubic Li-rich (>6 Li+ per formula unit) oxide argyrodite Li7SiO5Cl that crystallizes with an ordered cubic (P213) structure at room temperature, undergoing a transition at 473 K to a Li+ site disordered F4̅3m structure, consistent with the symmetry adopted by superionic sulfide argyrodites. Four different Li+ sites are occupied in Li7SiO5Cl (T5, T5a, T3, and T4), the combination of which is previously unreported for Li-containing argyrodites. The disordered F4̅3m structure is stabilized to room temperature via substitution of Si4+ with P5+ in Li6+xP1-xSixO5Cl (0.3 < x < 0.85) solid solution. The resulting delocalization of Li+ sites leads to a maximum ionic conductivity of 1.82(1) × 10-6 S cm-1 at x = 0.75, which is 3 orders of magnitude higher than the conductivities reported previously for oxide argyrodites. The variation of ionic conductivity with composition in Li6+xP1-xSixO5Cl is directly connected to structural changes occurring within the Li+ sublattice. These materials present superior atmospheric stability over analogous sulfide argyrodites and are stable against Li metal. The ability to control the ionic conductivity through structure and composition emphasizes the advances that can be made with further research in the open field of oxide argyrodites.
| S-EPMC9732874 | biostudies-literature
Project description:Understanding the chemical composition and morphological evolution of the solid electrolyte interphase (SEI) formed at the interface between the lithium metal electrode and an inorganic solid-state electrolyte is crucial for developing reliable all-solid-state lithium batteries. To better understand the interaction between these cell components, we carry out X-ray photoemission spectroscopy (XPS) measurements during lithium plating on the surface of a Li6PS5Cl solid-state electrolyte pellet using an electron beam. The analyses of the XPS data highlight the role of Li plating current density on the evolution of a uniform and ionically conductive (i.e., Li3P-rich) SEI capable of decreasing the electrode∣solid electrolyte interfacial resistance. The XPS findings are validated via electrochemical impedance spectrsocopy measurements of all-solid-state lithium-based cells.
| S-EPMC9700819 | biostudies-literature
Project description:To match the high capacity of metallic anodes, all-solid-state batteries require high energy density, long-lasting composite cathodes such as Ni-Mn-Co (NMC)-based lithium oxides mixed with a solid-state electrolyte (SSE). However in practice, cathode capacity typically fades due to NMC cracking and increasing NMC/SSE interface debonding because of NMC pulverization, which is only partially mitigated by the application of a high cell pressure during cycling. Using smart processing protocols, we report a single-crystal particulate LiNi0.83Mn0.06Co0.11O2 and Li6PS5Cl SSE composite cathode with outstanding discharge capacity of 210 mA h g-1 at 30 °C. A first cycle coulombic efficiency of >85, and >99% thereafter, was achieved despite a 5.5% volume change during cycling. A near-practical discharge capacity at a high areal capacity of 8.7 mA h cm-2 was obtained using an asymmetric anode/cathode cycling pressure of only 2.5 MPa/0.2 MPa.
| S-EPMC8397257 | biostudies-literature
Project description:Sulfide-based solid electrolytes with high Li+ conductivity, such as Li3PS4, are key materials for the realization of all-solid-state Li+ batteries. One approach to achieving high Li+ conductivity is to combine crystalline-phase stabilization at high temperatures with the introduction of defects at room temperature. In this work, this approach was verified by codoping Li3PS4 with two kinds of divalent cations. The resulting structural changes were comprehensively investigated both experimentally and computationally. The high-temperature β-Li3PS4 phase of Li3PS4 could be stabilized at room temperature by adjusting the amount of Ca or Ba doping. The synthesized samples doped with divalent cations were found to have conductivities about 2 orders of magnitude higher than that of the γ-Li3PS4 phase at room temperature. The resultant Li+ conductivity at room temperature was also higher than that expected from interpolation of results for nondoped β-Li3PS4. It is believed that the structural changes produced by the divalent cation doping contribute to this increase in conductivity. The stability of the β-Li3PS4 phase with divalent cation doping was also demonstrated using density-functional-theory calculations for models with equivalent compositions to the synthesized samples. The Li+ positions obtained by structural optimization calculations showed the presence of diverse and disordered Li sites in the Ca-doped lattice. Such structural changes can contribute to cascade processes involving Li+ collisions, referred to as the "billiard-ball" mechanism, which cannot occur in nondoped β-Li3PS4. This series of experiments involving the synthesis and analyses of β-Li3PS4 with divalent cation doping provides a way to enhance Li+ conductivity through structural modification and optimization.
| S-EPMC10938318 | biostudies-literature
Project description:Lithium argyrodite Li6PS5Cl powders are synthesized from Li2S, P2S5, and LiCl via wet milling and post-annealing at 500°C for 4 h. Organic solvents such as hexane, heptane, toluene, and xylene are used during the wet milling process. The phase evolution, powder morphology, and electrochemical properties of the wet-milled Li6PS5Cl powders and electrolytes are studied. Compared to dry milling, the processing time is significantly reduced via wet milling. The nature of the solvent does not affect the ionic conductivity significantly; however, the electronic conductivity changes noticeably. The study indicates that xylene and toluene can be used for the wet milling to synthesize Li6PS5Cl electrolyte powder with low electronic and comparable ionic conductivities. The all-solid-state cell with the xylene-processed Li6PS5Cl electrolyte exhibits the highest discharge capacity of 192.4 mAh·g-1 and a Coulombic efficiency of 81.3% for the first discharge cycle.
| S-EPMC8717468 | biostudies-literature
Project description:Interfacial instability, viz., pore formation in the lithium metal anode (LMA) during discharge leading to high impedance, current focusing induced solid-electrolyte (SE) fracture during charging, and formation/behaviour of the solid-electrolyte interphase (SEI), at the anode, is one of the major hurdles in the development of solid-state batteries (SSBs). Also, understanding cell polarization behaviour at high current density is critical to achieving the goal of fast-charging battery and electric vehicle. Herein, via in situ electrochemical scanning electron microscopy (SEM) measurements, performed with freshly deposited lithium microelectrodes on transgranularly fractured fresh Li6PS5Cl (LPSCl), the LiǀLPSCl interface kinetics are investigated beyond the linear regime. Even at relatively small overvoltages of a few mV, the LiǀLPSCl interface shows non-linear kinetics. The interface kinetics possibly involve multiple rate-limiting processes, i.e., ion transport across the SEI and SE|SEI interfaces, as well as charge transfer across the LiǀSEI interface. The total polarization resistance RP of the microelectrode interface is determined to be ≈ 0.8 Ω cm2 . It is further shown that the nanocrystalline lithium microstructure can lead to a stable LiǀSE interface via Coble creep along with uniform stripping. Also, spatially resolved lithium deposition, i.e., at grain surface flaws, grain boundaries, and flaw-free surfaces, indicates exceptionally high mechanical endurance of flaw-free surfaces toward cathodic load (>150 mA cm-2 ). This highlights the prominent role of surface defects in dendrite growth.
| S-EPMC10401129 | biostudies-literature
Project description:Argyrodite solid electrolytes such as lithium phosphorus sulfur chloride (Li6PS5Cl) have recently attracted great attention due to their excellent lithium-ion transport properties, which are applicable to all-solid-state lithium batteries. In this study, we report the improved ionic conductivity of an argyrodite solid electrolyte, Li6PS5Cl, in all-solid-state lithium batteries via the co-doping of chlorine (Cl) and aluminum (Al) elements. Electrochemical analysis was conducted on the doped argyrodite structure of Li6PS5Cl, which revealed that the substitution of cations and anions greatly improved the ionic conductivity of solid electrolytes. The ionic conductivity of the Cl- and Al-doped Li6PS5Cl (Li5.4Al0.1PS4.7Cl1.3) electrolyte was 7.29 × 10-3 S cm-1 at room temperature, which is 4.7 times higher than that of Li6PS5Cl. The Arrhenius plot of the Li5.4Al0.1PS4.7Cl1.3 electrolyte further elucidated its low activation energy at 0.09 eV.
| S-EPMC9783369 | biostudies-literature