Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Lighting-environment-adjustable block-type 3D indoor PV for wireless sensor communication.

ABSTRACT: Demand is increasing for photovoltaics (PVs) as a result of the development of the Internet of Things and edge computing technologies. As the lighting environment is different for the applications, thus, PVs must be adjustable to various light environments in which systems are installed. PVs should therefore be capable of easily changing their morphology without damaging the cells. To address this problem, in this work, a three-dimensional (3D) structure that increases power output under omnidirectional light was applied to a crystalline silicon solar cell array using a block-type method. The resultant block-type 3D indoor PV could operate a Bluetooth low-energy module in conjunction with a power management integrated circuit when the illuminance was 532 lx and 1620 lx and each PV installation area was 129.9cm² and 32.48 cm² respectively.

SUBMITTER: Sim YH

PROVIDER: S-EPMC10587129 | biostudies-literature | 2023 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Lighting-environment-adjustable block-type 3D indoor PV for wireless sensor communication.

Sim Yeon Hyang YH Hwang Jung-Hyun JH Yun Min Ju MJ Lee Kyoungho K Lee Dong Yoon DY Cha Seung I SI

Scientific reports 20231019 1

Demand is increasing for photovoltaics (PVs) as a result of the development of the Internet of Things and edge computing technologies. As the lighting environment is different for the applications, thus, PVs must be adjustable to various light environments in which systems are installed. PVs should therefore be capable of easily changing their morphology without damaging the cells. To address this problem, in this work, a three-dimensional (3D) structure that increases power output under omnidir ...[more]

PMID: 37857808

Similar Datasets

3D designed battery-free wireless origami pressure sensor

Project description:A pressure monitoring structure is a very useful element for a wearable device for health monitoring and sports biomechanics. While pressure sensors have been studied extensively, battery-free functions working in wireless detection have not been studied much. Here, we report a 3D-structured origami-based architecture sensor for wireless pressure monitoring. We developed an architectured platform for wireless pressure sensing through inductor-capacitor (LC) sensors and a monopole antenna. A personalized smart insole with Miura-ori origami designs has been 3D printed together with conductive 3D printed sensors seamlessly. Wireless monitoring of resonant frequency and intensity changes of LC sensors have been demonstrated to monitor foot pressure for different postures. The sensitivity of the wireless pressure sensor is tunable from 15.7 to 2.1 MHz/kPa in the pressure ranges from 0 to 9 kPa and from 10 to 40 kPa, respectively. The proposed wireless pressure-sensing platform can be utilized for various applications such as orthotics, prosthetics, and sports gear.

| S-EPMC9708697 | biostudies-literature

Wireless Sensor for Meat Freshness Assessment Based on Radio Frequency Communication.

Project description:Wireless communication technologies, particularly radio frequency (RF), have been widely explored for wearable electronics with secure and user-friendly information transmission. By exploiting the operational principle of chemically actuated resonant devices (CARDs) and the electrical response observed in chemiresistive materials, we propose a simple and hands-on alternative to design and manufacture RF tags that function as CARDs for wireless sensing of meat freshness. Specifically, the RF antennas were meticulously designed and fabricated by lithography onto a flexible substrate with conductive tape, and the RF signal was characterized in terms of amplitude and peak resonant frequency. Subsequently, a single-walled carbon nanotube (SWCNT)/MoS2/In2O3 chemiresistive composite was incorporated into the RF tag to convey it as CARDs. The RF signal was then utilized to establish a correlation between the sensor's electrical response and the RF attenuation signal (reflection coefficient) in the presence of volatile amines and seafood (shrimp) samples. The freshness of the seafood samples was systematically assessed throughout the storage time by utilizing the CARDs, thereby underscoring their effective potential for monitoring food quality. Specifically, the developed wireless tags provide cumulative amine exposure data within the food package, demonstrating a gradual decrease in radio frequency signals. This study illustrates the versatility of RF tags integrated with chemiresistors as a promising pathway toward scalable, affordable, and portable wireless chemical sensors.

| S-EPMC11264315 | biostudies-literature

Parametric Loop Division for 3D Localization in Wireless Sensor Networks.

Project description:Localization in Wireless Sensor Networks (WSNs) has been an active topic for more than two decades. A variety of algorithms were proposed to improve the localization accuracy. However, they are either limited to two-dimensional (2D) space, or require specific sensor deployment for proper operations. In this paper, we proposed a three-dimensional (3D) localization scheme for WSNs based on the well-known parametric Loop division (PLD) algorithm. The proposed scheme localizes a sensor node in a region bounded by a network of anchor nodes. By iteratively shrinking that region towards its center point, the proposed scheme provides better localization accuracy as compared to existing schemes. Furthermore, it is cost-effective and independent of environmental irregularity. We provide an analytical framework for the proposed scheme and find its lower bound accuracy. Simulation results shows that the proposed algorithm provides an average localization accuracy of 0.89 m with a standard deviation of 1.2 m.

| S-EPMC5539484 | biostudies-other

In-vacuum active colour sensor and wireless communication across a vacuum-air interface.

Project description:In situ sensing with wireless digital-data transfer is a potential processing scheme that works very closely to the location of an event monitored by a sensor and converts the sensor's raw output into digitized and informative small-volume bits, as suggested by recent proposals for edge computing and the Internet of Things (IoT). Colour perception may be a target of in situ sensor data acquisition; however, in contrast to from other sensing devices, colour sensors that detect visible light signals are usually located away from light-emitting sources, collecting light transmitting through the space and attenuating it in some manner. For example, in a vacuum chamber whose gas pressure is much less than the ambient atmosphere in which the sensors usually work, there are many veiled light sources, such as discharge plasma, for various industrial purposes including nanoscale manufacturing. In this study, we designed an in-vacuum colour sensor that can work with analogue-to-digital conversion and transfer data by wireless communication; this sensor is active in a low-pressure plasma chamber, detecting light signals and transferring them to a personal computer located outside the vacuum chamber. In addition to detecting lights with controlled spectra from outside successfully, we achieved complete operation of our in-vacuum active sensor for plasma emissions generated at 100 Pa. Comparing the signals with data from simultaneous monitoring by a monochromator, we established that the recorded signals arose from the plasma, confirming successful direct detection of low-pressure plasma emissions without any filtering effects between the sensor and the target object.

| S-EPMC7809036 | biostudies-literature

Statistical Modelling and Characterization of Experimental mm-Wave Indoor Channels for Future 5G Wireless Communication Networks.

Project description:This paper presents an experimental characterization of millimeter-wave (mm-wave) channels in the 6.5 GHz, 10.5 GHz, 15 GHz, 19 GHz, 28 GHz and 38 GHz frequency bands in an indoor corridor environment. More than 4,000 power delay profiles were measured across the bands using an omnidirectional transmitter antenna and a highly directional horn receiver antenna for both co- and cross-polarized antenna configurations. This paper develops a new path-loss model to account for the frequency attenuation with distance, which we term the frequency attenuation (FA) path-loss model and introduce a frequency-dependent attenuation factor. The large-scale path loss was characterized based on both new and well-known path-loss models. A general and less complex method is also proposed to estimate the cross-polarization discrimination (XPD) factor of close-in reference distance with the XPD (CIX) and ABG with the XPD (ABGX) path-loss models to avoid the computational complexity of minimum mean square error (MMSE) approach. Moreover, small-scale parameters such as root mean square (RMS) delay spread, mean excess (MN-EX) delay, dispersion factors and maximum excess (MAX-EX) delay parameters were used to characterize the multipath channel dispersion. Multiple statistical distributions for RMS delay spread were also investigated. The results show that our proposed models are simpler and more physically-based than other well-known models. The path-loss exponents for all studied models are smaller than that of the free-space model by values in the range of 0.1 to 1.4 for all measured frequencies. The RMS delay spread values varied between 0.2 ns and 13.8 ns, and the dispersion factor values were less than 1 for all measured frequencies. The exponential and Weibull probability distribution models best fit the RMS delay spread empirical distribution for all of the measured frequencies in all scenarios.

| S-EPMC5031408 | biostudies-literature

A Self-Sustained Wireless Multi-Sensor Platform Integrated with Printable Organic Sensors for Indoor Environmental Monitoring.

Project description:A self-sustained multi-sensor platform for indoor environmental monitoring is proposed in this paper. To reduce the cost and power consumption of the sensing platform, in the developed platform, organic materials of PEDOT:PSS and PEDOT:PSS/EB-PANI are used as the sensing films for humidity and CO? detection, respectively. Different from traditional gas sensors, these organic sensing films can operate at room temperature without heating processes or infrared transceivers so that the power consumption of the developed humidity and the CO? sensors can be as low as 10 ?W and 5 ?W, respectively. To cooperate with these low-power sensors, a Complementary Metal-Oxide-Semiconductor (CMOS) system-on-chip (SoC) is designed to amplify and to read out multiple sensor signals with low power consumption. The developed SoC includes an analog-front-end interface circuit (AFE), an analog-to-digital convertor (ADC), a digital controller and a power management unit (PMU). Scheduled by the digital controller, the sensing circuits are power gated with a small duty-cycle to reduce the average power consumption to 3.2 ?W. The designed PMU converts the power scavenged from a dye sensitized solar cell (DSSC) module into required supply voltages for SoC circuits operation under typical indoor illuminance conditions. To our knowledge, this is the first multiple environmental parameters (Temperature/CO?/Humidity) sensing platform that demonstrates a true self-powering functionality for long-term operations.

| S-EPMC5421675 | biostudies-literature

AgriLogger: A New Wireless Sensor for Monitoring Agrometeorological Data in Areas Lacking Communication Networks.

Project description:The use of wireless technologies in the field of agriculture, or so-called smart or precision agriculture, is considered as one of the main efforts applied nowadays to multiply the food production on earth. However, wireless sensor network (WSN) technology is still at its early development stage and its application in agriculture and food industry is still rare due to the lack of farmers' awareness and outreach about the matter. This paper presents a new agro-sensor named AgriLogger with an aim to collect, store for long periods and transmit agrometeorological data represented by temperature and relative humidity in remote areas hard to reach and not served by telecommunication networks. The sensor exhibits long battery life, in the order of 10 years, thanks to low consumption technologies and to hardware sleep/wake up approach. It can be remotely placed on preselected sites through a customized drone. This latter, equipped with a dedicated payload, can then return on the sites where sensors have been placed, and, while hovering, wakes up the single devices and uploads their collected data through local wireless network. Field tests have demonstrated that the sensor, after being placed manually in two different positions, inside and outside a vineyard canopy, is able to collect and store successfully agrometeorological data like temperature and relative humidity. Moreover, the use of a drone potentially allows the collection of data from remote areas and, therefore, is able to provide a periodical monitoring of agro-ecological conditions.

| S-EPMC7146555 | biostudies-literature

A wireless sensor enabled by wireless power.

Project description:Through harvesting energy by wireless charging and delivering data by wireless communication, this study proposes the concept of a wireless sensor enabled by wireless power (WPWS) and reports the fabrication of a prototype for functional tests. One WPWS node consists of wireless power module and sensor module with different chip-type sensors. Its main feature is the dual antenna structure. Following RFID system architecture, a power harvesting antenna was designed to gather power from a standard reader working in the 915 MHz band. Referring to the Modbus protocol, the other wireless communication antenna was integrated on a node to send sensor data in parallel. The dual antenna structure integrates both the advantages of an RFID system and a wireless sensor. Using a standard UHF RFID reader, WPWS can be enabled in a distributed area with a diameter up to 4 m. Working status is similar to that of a passive tag, except that a tag can only be queried statically, while the WPWS can send dynamic data from the sensors. The function is the same as a wireless sensor node. Different WPWSs equipped with temperature and humidity, optical and airflow velocity sensors are tested in this study. All sensors can send back detection data within 8 s. The accuracy is within 8% deviation compared with laboratory equipment. A wireless sensor network enabled by wireless power should be a totally wireless sensor network using WPWS. However, distributed WPWSs only can form a star topology, the simplest topology for constructing a sensor network. Because of shielding effects, it is difficult to apply other complex topologies. Despite this limitation, WPWS still can be used to extend sensor network applications in hazardous environments. Further research is needed to improve WPWS to realize a totally wireless sensor network.

| S-EPMC3571774 | biostudies-literature

Toward an Indoor Lighting Solution for Social Jet Lag.

Project description:There is growing interest in developing artificial lighting that stimulates intrinsically photosensitive retinal ganglion cells (ipRGCs) to entrain circadian rhythms to improve mood, sleep, and health. Efforts have focused on stimulating the intrinsic photopigment, melanopsin; however, specialized color vision circuits have been elucidated in the primate retina that transmit blue-yellow cone-opponent signals to ipRGCs. We designed a light that stimulates color-opponent inputs to ipRGCs by temporally alternating short- and long-wavelength components that strongly modulate short-wavelength sensitive (S) cones. Two-hour exposure to this S-cone modulating light produced an average circadian phase advance of 1 h and 20 min in 6 subjects (mean age = 30 years) compared to no phase advance for the subjects after exposure to a 500 lux white light equated for melanopsin effectiveness. These results are promising for developing artificial lighting that is highly effective in controlling circadian rhythms by invisibly modulating cone-opponent circuits.

| S-EPMC11416324 | biostudies-literature

ZnS Quantum Dot Based Acetone Sensor for Monitoring Health-Hazardous Gases in Indoor/Outdoor Environment.

Project description:This study reports the ZnS quantum dots (QDs) synthesis by a hot-injection method for acetone gas sensing applications. The prepared ZnS QDs were characterized by X-ray diffraction (XRD) and transmission electron microscopy analysis. The XRD result confirms the successful formation of the wurtzite phase of ZnS, with a size of ~5 nm. Transmission electron microscopy (TEM), high-resolution TEM (HRTEM), and fast Fourier transform (FFT) images reveal the synthesis of agglomerated ZnS QDs with different sizes, with lattice spacing (0.31 nm) corresponding to (111) lattice plane. The ZnS QDs sensor reveals a high sensitivity (92.4%) and fast response and recovery time (5.5 s and 6.7 s, respectively) for 100 ppm acetone at 175 °C. In addition, the ZnS QDs sensor elucidates high acetone selectivity of 91.1% as compared with other intrusive gases such as ammonia (16.0%), toluene (21.1%), ethanol (26.3%), butanol (11.2%), formaldehyde (9.6%), isopropanol (22.3%), and benzene (18.7%) for 100 ppm acetone concentration at 175 °C. Furthermore, it depicts outstanding stability (89.1%) during thirty days, with five day intervals, for 100 ppm at an operating temperature of 175 °C. In addition, the ZnS QDs acetone sensor elucidates a theoretical detection limit of ~1.2 ppm at 175 °C. Therefore, ZnS QDs can be a promising and quick traceable sensor nanomaterial for acetone sensing applications.

| S-EPMC8224612 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data