Solvothermal synthesis of cobalt PCP pincer complexes from [Co2(CO)8]
Ontology highlight
ABSTRACT:
SUBMITTER: Schratzberger H
PROVIDER: S-EPMC10620272 | biostudies-literature | 2023 Jan
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The 15e square-planar complexes [Co(PCPMe-iPr)Cl] (2a) and [Co(PCP-tBu)Cl] (2b), respectively, react readily with NaBH4 to afford complexes [Co(PCPMe-iPr)(η2-BH4)] (4a) and [Co(PCP-tBu)(η2-BH4)] (4b) in high yields, as confirmed by IR spectroscopy, X-ray crystallography, and elemental analysis. The borohydride ligand is symmetrically bound to the cobalt center in η2-fashion. These compounds are paramagnetic with effective magnetic moments of 2.0(1) and 2.1(1) μB consistent with a d7 low-spin system corresponding to one unpaired electron. None of these complexes reacted with CO2 to give formate complexes. For structural and reactivity comparisons, we prepared the analogous Ni(II) borohydride complex [Ni(PCPMe-iPr)(η2-BH4)] (5) via two different synthetic routes. One utilizes [Ni(PCPMe-iPr)Cl] (3) and NaBH4, the second one makes use of the hydride complex [Ni(PCPMe-iPr)H] (6) and BH3·THF. In both cases, 5 is obtained in high yields. In contrast to 4a and 4b, the borohydride ligand is asymmetrically bound to the nickel center but still in an η2-mode. [Ni(PCPMe-iPr)(η2-BH4)] (5) loses readily BH3 at elevated temperatures in the presence of NEt3 to form 6. Complexes 5 and 6 are both diamagnetic and were characterized by a combination of 1H, 13C{1H}, and 31P{1H} NMR, IR spectroscopy, and elemental analysis. Additionally, the structure of these compounds was established by X-ray crystallography. Complexes 5 and 6 react with CO2 to give the formate complex [Ni(PCPMe-iPr)(OC(C=O)H] (7). The extrusion of BH3 from [Co(PCPMe-iPr)(η2-BH4)] (4a) and [Ni(PCPMe-iPr)(η2-BH4)] (5) with the aid of NH3 to yield the respective hydride complexes [Co(PCPMe-iPr)H] and [Ni(PCPMe-iPr)H] (6) and BH3NH3 was investigated by DFT calculations showing that formation of the Ni hydride is thermodynamically favorable, whereas the formation of the Co(II) hydride, in agreement with the experiment, is unfavorable. The electronic structures and the bonding of the borohydride ligand in [Co(PCPMe-iPr)(η2-BH4)] (4a) and [Ni(PCPMe-iPr)(η2-BH4)] (5) were established by DFT computations.
| S-EPMC5021384 | biostudies-literature
Project description:The synthesis and characterization of two Co(II) complexes stabilized by a tridentate SCS pincer ligand are described. Paramagnetic [Co(κ3-SCSCH2-Et)2] and [Co(κ3-SCSCH2-tBu)(κ2-SCSCH2-tBu)] were obtained via transmetalation protocol from CoBr2 and S(C-Br)SCH2-R (R = Et, tBu). Oxidation of the latter with [Cp2Fe]PF6 affords the diamagnetic 18 VE complex [Co(κ3-SCSCH2-tBu)2]PF6. X-ray structures and DFT calculations are presented.Graphical abstractSupplementary informationThe online version contains supplementary material available at 10.1007/s00706-022-02949-1.
| S-EPMC9360111 | biostudies-literature
Project description:A series of cobalt complexes, stabilized by a monoanionic tridentate NCN pincer ligand, was synthetized and characterized. Preparation of the paramagnetic 15 VE complex [Co(NCNCH2-Et)Br] (1) was accomplished by transmetalation of Li[2,6-(Et2NCH2)2C6H3] with CoBr2 in THF. Treatment of this air-sensitive compound with NO gas resulted in the formation of the diamagnetic Co(III) species [Co(NCNCH2-Et)(NO)Br] (2) as confirmed by X-ray diffraction. This complex features a strongly bent NO ligand (Co-N-O∠135.0°). The νNO is observed at 1609 cm-1 which is typical for a bent metal-N-O arrangement. Coordinatively unsaturated 1 could further be treated with pyridine, isocyanides, phosphines and CO to form five-coordinate 17 VE complexes. Oxidation of 1 with CuBr2 led to the formation of the Co(III) complex [Co(NCNCH2-Et)Br2]. Treatment of [Co(NCNCH2-Et)Br2] with TlBF4 as halide scavenger in acetonitrile led to the formation of the cationic octahedral complex [Co(NCNCH2-Et)(MeCN)3](BF4)2. A combination of X-ray crystallography, IR-, NMR- and EPR-spectroscopy as well as DFT/CAS-SCF calculations were used to characterize all compounds.
| S-EPMC8596404 | biostudies-literature
Project description:Anhydrous CoCl2 or [NiCl2(DME)] reacts with the ligand PCPMe-iPr (1) in the presence of nBuLi to afford the 15e and 16e square planar complexes [Co(PCPMe-iPr)Cl] (2) and [Ni(PCPMe-iPr)Cl] (3), respectively. Complex 2 is a paramagnetic d7 low-spin complex, which is a useful precursor for a series of Co(I), Co(II), and Co(III) PCP complexes. Complex 2 reacts readily with CO and pyridine to afford the five-coordinate square-pyramidal 17e complexes [Co(PCPMe-iPr)(CO)Cl] (4) and [Co(PCPMe-iPr)(py)Cl] (5), respectively, while in the presence of Ag+ and CO the cationic complex [Co(PCPMe-iPr)(CO)2]+ (6) is afforded. The effective magnetic moments μeff of all Co(II) complexes were derived from the temperature dependence of the inverse molar magnetic susceptibility by SQUID measurements and are in the range 1.9 to 2.4 μB. This is consistent with a d7 low-spin configuration with some degree of spin-orbit coupling. Oxidation of 2 with CuCl2 affords the paramagnetic Co(III) PCP complex [Co(PCPMe-iPr)Cl2] (7), while the synthesis of the diamagnetic Co(I) complex [Co(PCPMe-iPr)(CO)2] (8) was achieved by stirring 2 in toluene with KC8 in the presence of CO. Finally, the cationic 16e Ni(II) PCP complex [Ni(PCPMe-iPr)(CO)]+ (10) was obtained by reacting complex 3 with 1 equiv of AgSbF6 in the presence of CO. The reactivity of CO addition to Co(I), Co(II), and Ni(II) PCP square planar complexes of the type [M(PCPMe-iPr)(CO)] n (n = +1, 0) was investigated by DFT calculations, showing that formation of the Co species, 6 and 8, is thermodynamically favorable, while Ni(II) maintains the 16e configuration since CO addition is unfavorable in this case. X-ray structures of most complexes are provided and discussed. A structural feature of interest is that the apical CO ligand in 4 deviates significantly from linearity, with a Co-C-O angle of 170.0(1)°. The DFT-calculated value is 172°, clearly showing that this is not a packing but an electronic effect.
| S-EPMC5021385 | biostudies-literature
Project description:The reaction of coordinatively unsaturated Co(II) PCP pincer complexes with nitric oxide leads to the formation of new, air-stable, diamagnetic mono nitrosyl compounds. The synthesis and characterization of five- and four-coordinate Co(III) and Co(I) nitrosyl pincer complexes based on three different ligand scaffolds is described. Passing NO through a solution of [Co(PCPNMe-iPr)Cl], [Co(PCPO-iPr)Cl] or [Co(PCPCH2-iPr)Br] led to the formation of the low-spin complex [Co(PCP-iPr)(NO)X] with a strongly bent NO ligand. Treatment of the latter species with (X = Cl, Br) AgBF4 led to chloride abstraction and formation of cationic square-planar Co(I) complexes of the type [Co(PCP-iPr)(NO)]+ featuring a linear NO group. This reaction could be viewed as a formal two electron reduction of the metal center by the NO radical from Co(III) to Co(I), if NO is counted as NO+. Hence, these systems can be described as {CoNO}8 according to the Enemark-Feltham convention. X-ray structures, spectroscopic and electrochemical data of all nitrosyl complexes are presented. Preliminary studies show that [Co(PCPNMe-iPr)(NO)]+ catalyzes efficiently the reductive hydroboration of nitriles with pinacolborane (HBpin) forming an intermediate {CoNO}8 hydride species.
| S-EPMC7388324 | biostudies-literature
Project description:The synthesis, characterization, and catalytic activity of low-spin {CoNO}8 pincer complexes of the type [Co(PCP)(NO)(H)] are described. These compounds are obtained either by reacting [Co(PCP)(κ2-BH4)] with NO and Et3N or, alternatively, by reacting [Co(PCP)(NO)]+ with boranes, such as NH3·BH3 in solution. The five-coordinate, diamagnetic Co(III) complex [Co(PCPNMe-iPr)(NO)(H)] was found to be the active species in the hydroboration of alkenes with anti-Markovnikov selectivity. A range of aromatic and aliphatic alkenes were efficiently converted with pinacolborane (HBpin) under mild conditions in good to excellent yield. Mechanistic insight into the catalytic reaction is provided by means of isotope labeling, NMR spectroscopy, and APCI/ESI-MS as well as DFT calculations.
| S-EPMC7842137 | biostudies-literature
Project description:Ti(IV) and Ti(III) complexes using the tBuPCP ligand have been synthesized (tBuPCP = C6H3-2,6-(CH2PtBu2)2). The [tBuPCP]Li synthon can be reacted with TiCl4(THF)2 to form (tBuPCP)TiCl3 (1) in limited yields due to significant reduction of the titanium synthon. The Ti(III) complex (tBuPCP)TiCl2 (2) has been further characterized. This can have half an equivalent of halide abstracted to form [{(tBuPCP)TiCl}2{μ-Cl}][B(C6F5)4] (3) and can also be methylated, forming (tBuPCP)TiMe2 (4). All the Ti(III) complexes have been characterized using EPR and X-ray crystallography, giving insight into their electronic structures, which are further supported by DFT calculations.
| S-EPMC10302872 | biostudies-literature
Project description:The mechanism for the borylation of an aromatic substrate by a cobalt pincer complex was investigated by density functional theory calculations. Experimental observations identified trans-(iPrPNP)CoH2(BPin) as the resting state in the borylation of five-membered heteroarenes, and 4-BPin-(iPrPNP)Co(N2)BPin as the resting state in the catalytic borylation of arene substrates. The active species, 4-R-(iPrPNP)CoBPin (R=H, BPin), were generated by reductive elimination of H2 in the former, through Berry pseudorotation to the cis isomer, and N2 loss in the latter. The catalytic mechanism of the resulting Co(I) complex was computed to involve three main steps: C-H oxidative addition of the aromatic substrate (C6H6), reductive elimination of PhBPin, and regeneration of the active complex. The oxidative addition product formed through the most favorable pathway, where the breaking C-H bond of C6H6 is parallel to a line between the two phosphine atoms, leaves the complex with a distorted PNP ligand, which rearranges to a more stable complex via dissociation and re-association of HBPin. Alternative pathways, σ-bond metathesis and the oxidative addition in which the breaking C-H bond is parallel to the Co-B bond, are predicted to be unlikely for this Co(I) complex. The thermodynamically favorable formation of the product PhBPin via reductive elimination drives the reaction forward. The active species regenerates through the oxidative addition of B2Pin2 and reductive elimination of HBPin. In the overall reaction, the flipping (refolding) of the five-membered phosphine rings, which connects the species with two phosphine rings folded in the same direction and that with them folded in different directions, is found to play an important role in the catalytic process, as it relieves steric crowding within the PNP ligand and opens Co coordination space. Metal-ligand cooperation based on the ligand's aromatization/dearomatization, a common mechanism for heavy-metal pincer complexes, and the dissociation of one phosphine ligand, do not apply in this system. This study provides guidance for understanding important features of pincer ligands with first-transition-row metals that differ from those in heavier metal complexes.
| S-EPMC6358283 | biostudies-literature
Project description:The insertion of CO2 into metal alkyl bonds is a crucial elementary step in transition metal-catalyzed processes for CO2 utilization. Here, we synthesize pincer-supported palladium complexes of the type (tBuPBP)Pd(alkyl) (tBuPBP = B(NCH2PtBu2)2C6H4-; alkyl = CH2CH3, CH2CH2CH3, CH2C6H5, and CH2-4-OMe-C6H4) and (tBuPBP)Pd(C6H5) and compare the rates of CO2 insertion into the palladium alkyl bonds to form metal carboxylate complexes. Although, the rate constant for CO2 insertion into (tBuPBP)Pd(CH2CH3) is more than double the rate constant we previously measured for insertion into the palladium methyl complex (tBuPBP)Pd(CH3), insertion into (tBuPBP)Pd(CH2CH2CH3) occurs approximately one order of magnitude slower than (tBuPBP)Pd(CH3). CO2 insertion into the benzyl complexes (tBuPBP)Pd(CH2C6H5) and (tBuPBP)Pd(CH2-4-OMe-C6H4) is significantly slower than any of the n-alkyl complexes, and CO2 does not insert into the palladium phenyl bond of (tBuPBP)Pd(C6H5). While (tBuPBP)Pd(CH2CH3) and (tBuPBP)Pd(CH2CH2CH3) are resistant to β-hydride elimination, we were unable to synthesize complexes with n-butyl, iso-propyl, and tert-butyl ligands due to β-hydride elimination and an unusual reductive coupling, which involves the formation of new C-B bonds. This reductive process also occurred for (tBuPBP)Pd(CH2C6H5) at elevated temperature and a related process involving the formation of a new H-B bond prevented the isolation of (tBuPBP)PdH. DFT calculations provide insight into the relative rates of CO2 insertion and indicate that steric factors are critical. Overall, this work is one of the first comparative studies of the rates of CO2 insertion into different metal alkyl bonds and provides fundamental information that may be important for the development of new catalysts for CO2 utilization.
| S-EPMC10395277 | biostudies-literature
Project description:A series of bis-NHC pincer complexes of palladium(II) have been prepared and characterized. These pyridyl-spaced dicarbene complexes ([(PDCR)Pd(MeCN)](PF6)2 ) were synthesized with substituents of varying steric bulk at the wingtip positions, which include R = methyl, ethyl, isopropyl, cyclohexyl, mesityl and 2,6-diisopropylphenyl. The synthesis of this library of complexes was accomplished either by direct metallation of the prerequisite pyridyl-spaced bis-imidazolium proligands with Pd(OAc)2 or via treatment with Ag2O to afford the corresponding silver carbenes, which were then transmetallated onto palladium. Solid-state structures for each of the [(PDCR)Pd(MeCN)](PF6)2 derivatives were obtained via X-ray crystallography and allowed for the steric properties of each PDCR ligand to be evaluated by two methods. These analyses, which included calculation of the percent buried volume (%VBur) and solid angles of the PDCR ligands, served to characterize the steric environment around the palladium center in each of the complexes that was prepared. Finally, voltammetry and controlled potential electrolysis studies were performed to characterize the redox chemistry of the [(PDCR)Pd(MeCN)](PF6)2 derivatives and assess if they could electrocatalyze the reduction of CO2. The influence of the steric properties of the PDCR ligand on the electrochemistry of the resulting complexes [(PDCR)Pd(MeCN)](PF6)2 is also discussed.
| S-EPMC6457682 | biostudies-literature