Large-Area, Flexible, Lead-Free Sn-Perovskite Solar Modules.
Ontology highlight
ABSTRACT:
SUBMITTER: Zuraw W
PROVIDER: S-EPMC10644357 | biostudies-literature | 2023 Nov
REPOSITORIES: biostudies-literature
Publications
Large-Area, Flexible, Lead-Free Sn-Perovskite Solar Modules.
Żuraw Wiktor W Vinocour Pacheco Felipe Andres FA Sánchez-Diaz Jesús J Przypis Łukasz Ł Mejia Escobar Mario Alejandro MA Almosni Samy S Vescio Giovanni G Martínez-Pastor Juan P JP Garrido Blas B Kudrawiec Robert R Mora-Seró Iván I Öz Senol S
ACS energy letters 20231026 11
For the first time, large-area, flexible organic-inorganic tin perovskite solar modules are fabricated by means of an industry-compatible and scalable blade-coating technique. An 8-cell interconnected mini module with dimensions of 25 cm<sup>2</sup> (active area = 8 × 1.5 cm<sup>2</sup>) reached 5.7% power conversion efficiency under 1000 W/m<sup>2</sup> (AM 1.5G) and 9.4% under 2000 lx (white-LED). ...[more]
Similar Datasets
Project description:Perovskite solar modules (PSMs) have been attracting the photovoltaic market, owing to low manufacturing costs and process versatility. The employment of flexible substrates gives the chance to explore new applications and further increase the fabrication throughput. However, the present state-of-the-art of flexible perovskite solar modules (FPSMs) does not show any data on light-soaking stability, revealing that the scientific community is still far from the potential marketing of the product. During this work, we demonstrate, for the first time, an outstanding light stability of FPSMs over 1000 h considering the recovering time (T80 = 730 h), exhibiting a power conversion efficiency (PCE) of 10.51% over a 15.7 cm2 active area obtained with scalable processes by exploiting blade deposition of a transporting layer and a stable double-cation perovskite (cesium and formamidinium, CsFA) absorber.
| S-EPMC8289250 | biostudies-literature
Project description:Despite significant progress in tin-based perovskites, the development of stable and high-performance tin-based perovskite solar cells (TPSCs) remains a challenge. In this pursuit, a multitude of strategies have been explored, encompassing the use of reducing agents, antioxidants, bulky cations, and customized solvent systems. We propose an improved approach for synthesizing SnI2 from elemental tin and iodine. Here, we generate tin nanoparticles grafted with a carboxylic acid in situ from tin powder-carboxylic acid-assisted synthesis (CAAS). This methodology not only improves the synthesis process of SnI2 but also enhances precursor stability against oxidation. We use 119Sn MAS NMR to study the atomic-level structure of the resulting FASnI3 thin films and find that the CAAS approach leads to highly pure and unoxidized material. We report remarkable reproducibility in fabricating large-area (1 cm2) flexible TPSCs with significant improvement in open-circuit voltage leading to the champion device showing a power conversion efficiency of 8.35%.
| S-EPMC11406576 | biostudies-literature
Project description:Perovskite photovoltaics are gaining increasing common ground to partner with or compete with silicon photovoltaics to reduce cost of solar energy. However, a cost-effective waste management for toxic lead (Pb), which might determine the fate of this technology, has not been developed yet. Here, we report an end-of-life material management for perovskite solar modules to recycle toxic lead and valuable transparent conductors to protect the environment and create dramatic economic benefits from recycled materials. Lead is separated from decommissioned modules by weakly acidic cation exchange resin, which could be released as soluble Pb(NO3)2 followed by precipitation as PbI2 for reuse, with a recycling efficiency of 99.2%. Thermal delamination disassembles the encapsulated modules with intact transparent conductors and cover glasses. The refabricated devices based on recycled lead iodide and recycled transparent conductors show comparable performance as devices based on fresh raw materials. Cost analysis shows this recycling technology is economically attractive.
| S-EPMC8494795 | biostudies-literature
Project description:The important but remained issue to be addressed to achieve the mass production of perovskite solar modules include a large-area fabrication of high-quality perovskite film with eco-friendly, viable production methods. Although several efforts are made to achieve large-area fabrication of perovskite, the development of eco-friendly solvent system, which is precisely designed to be fit to scale-up methods are still challenging. Herein, this work develops the eco-friendly solvent/co-solvent system to produce a high-quality perovskite layer with a bathing in eco-friendly antisolvent. The new co-solvent/additive, methylsulfonylmethane (MSM), efficiently improves the overall solubility and has a suitable binding strength to the perovskite precursor, resulting in a high-quality perovskite film with antisolvent bathing method in large area. The resultant perovskite solar cells showed high power conversion efficiency of over 24% (in reverse scan), with a good long-term stability under continuous light illumination or damp-heat condition. MSM is also beneficial to produce a perovskite layer at low-temperature or high-humidity. MSM-based solvent system is finally applied to large-area, resulting in highly efficiency perovskite solar modules with PCE of 19.9% (by aperture) or 21.2% (by active area) in reverse scan. These findings contribute to step forward to a mass production of perovskite solar modules with eco-friendly way.
| S-EPMC10369249 | biostudies-literature
Project description:Perovskite solar cells have shown considerable developments in the last decade, and commercial applications are drawing closer. In this article, we present a techno-economic study of perovskite PV technologies. We compare published data on manufacturing costs of single-junction perovskite modules and find that they are dependent on the module design (rigid or flexible) and vary from 10 to almost 100 € per m2. We calculate the LCOE as a function of module efficiency and stability for a set of four module cost scenarios at 12.5, 25, 50, and 100 € per m2. The resulting LCOE varies from 4.3 to 25.5 ct kW-1 h-1 and shows low potential for immediate competition with crystalline silicon PV in the utility sector. Perovskite PV's competitive advantage lies in both lighter and less rigid modules, and in the development of tandem modules together with silicon. We hence extend the LCOE equation to highlight the benefit of producing flexible low-weight modules by roll-to-roll manufacturing, and modify the LCOE maps to showcase the benefits of tandem modules. Based on learning curve analyses applied to the CAPEX of single-junction and tandem modules, we develop three scenarios for the evolution of the LCOE of perovskite modules from 2025 to 2050. Under the optimistic scenarios, we find that the LCOE could reduce to 2.8 ct kW-1 h-1 by 2050.
| S-EPMC10596340 | biostudies-literature
Project description:Simplifying the design of lead-free perovskite solar cells (PSCs) has drawn a lot of interest due to their low manufacturing cost and relative non-toxic nature. Focus has been placed mostly on reducing the toxic lead element and eliminating the requirement for expensive hole transport materials (HTMs). However, in terms of power conversion efficiency (PCE), the PSCs using all charge transport materials surpass the environmentally beneficial HTM-free PSCs. The low PCEs of the lead-free HTM-free PSCs could be linked to poorer hole transport and extraction as well as lower light harvesting. In this context, a lead-free perovskite homojunction-based HTM-free PSC was investigated, and the performance was then assessed using a Solar Cell Capacitance Simulator (SCAPS). A two-step method was employed to fabricate lead-free perovskite homojunction-based HTM-free PSCs in order to validate the simulation results. The simulation results show that high hole mobility and a narrow band gap of cesium tin iodide (CsSnI3) boosted the hole collection and absorption spectrum, respectively. Additionally, the homojunction's built-in electric field, which was identified using SCAPS simulations, promoted the directed transport of the photo-induced charges, lowering carrier recombination losses. Homojunction-based HTM-free PSCs having a CsSnI3 layer with a thickness of 100 nm, defect density of 1015 cm-3, and interface defect density of 1018 cm-3 were found to be capable of delivering high PCEs under a working temperature of 300 K. When compared to formamidinium tin iodide (FASnI3)-based devices, the open-circuit voltage (Voc), short-circuit density (Jsc), fill factor (FF), and PCE of FASnI3/CsSnI3 homojunction-based HTM-free PSCs were all improved from 0.66 to 0.78 V, 26.07 to 27.65 mA cm-2, 76.37 to 79.74%, and 14.62 to 19.03%, respectively. In comparison to a FASnI3-based device (PCE = 8.94%), an experimentally fabricated device using homojunction of FASnI3/CsSnI3 performs better with Voc of 0.84 V, Jsc of 22.06 mA cm-2, FF of 63.50%, and PCE of 11.77%. Moreover, FASnI3/CsSnI3-based PSC is more stable over time than its FASnI3-based counterpart, preserving 89% of its initial PCE. These findings provide promising guidelines for developing highly efficient and environmentally friendly HTM-free PSCs based on perovskite homojunction.
| S-EPMC10054775 | biostudies-literature
Project description:Carbon-based perovskite solar cells show great potential owing to their low-cost production and superior stability in ambient air. However, scaling up to high-efficiency carbon-based solar modules hinges on reliable deposition of uniform defect-free perovskite films over large areas, which is an unsettled but urgent issue. In this work, a long-chain gemini surfactant is introduced into perovskite precursor ink to enforce self-assembly into a network structure, considerably enhancing the coverage and smoothness of the perovskite films. The long gemini surfactant plays a distinctively synergistic role in perovskite film construction, crystallization kinetics modulation and defect passivation, leading to a certified record power conversion efficiency of 15.46% with Voc of 1.13 V and Jsc of 22.92 mA cm-2 for this type of modules. Importantly, all of the functional layers of the module are printed through a simple and high-speed (300 cm min-1) blade coating strategy in ambient atmosphere. These results mark a significant step toward the commercialization of all-printable carbon-based perovskite solar modules.
| S-EPMC10349030 | biostudies-literature
Project description:Perovskite-based light-emitting diodes (PeLEDs) are now approaching the upper limits of external quantum efficiency (EQE); however, their application is currently limited by reliance on lead and by inadequate color purity. The Rec. 2020 requires Commission Internationale de l'Eclairage coordinates of (0.708, 0.292) for red emitters, but present-day perovskite devices only achieve (0.71, 0.28). Here, lead-free PeLEDs are reported with color coordinates of (0.706, 0.294)-the highest purity reported among red PeLEDs. The variation of the emission spectrum is also evaluated as a function of temperature and applied potential, finding that emission redshifts by <3 nm under low temperature and by <0.3 nm V-1 with operating voltage. The prominent oxidation pathway of Sn is identified and this is suppressed with the aid of H3PO2. This strategy prevents the oxidation of the constituent precursors, through both its moderate reducing properties and through its forming complexes with the perovskite that increase the energetic barrier toward Sn oxidation. The H3PO2 additionally seeds crystal growth during film formation, improving film quality. PeLEDs are reported with an EQE of 0.3% and a brightness of 70 cd m-2; this is the record among reported red-emitting, lead-free PeLEDs.
| S-EPMC7175260 | biostudies-literature
Project description:Organic and perovskite semiconductor materials are considered an interesting combination thanks to their similar processing technologies and band gap tunability. Here, we present the design and analysis of perovskite/organic tandem solar cells (TSCs) by using a full optoelectronic simulator (SETFOS). A wide band gap lead-free ASnI2Br perovskite top subcell is utilized in conjunction with a narrow band gap DPPEZnP-TBO:PC61BM heterojunction organic bottom subcell to form the tandem configuration. The top and bottom cells were designed according to previous experimental work keeping the same materials and physical parameters. The calibration of the two cells regarding simulation and experimental data shows very good agreement, implying the validation of the simulation process. Accordingly, the two cells are combined to develop a 2T tandem cell. Further, upon optimizing the thickness of the front and rear subcells, a current matching condition is satisfied for which the proposed perovskite/organic TSC achieves an efficiency of 13.32%, Jsc of 13.74 mA/cm2, and Voc of 1.486 V. On the other hand, when optimizing the tandem by utilizing full optoelectronic simulation, the tandem shows a higher efficiency of about 14%, although it achieves a decreased Jsc of 12.27 mA/cm2. The study shows that the efficiency can be further improved when concurrently optimizing the various tandem layers by global optimization routines. Furthermore, the impact of defects is demonstrated to highlight other possible routes to improve efficiency. The current simulation study can provide a physical understanding and potential directions for further efficiency improvement for lead-free perovskite/organic TSC.
| S-EPMC9918906 | biostudies-literature
Project description:A void-free metal halide perovskite (MHP) layer on a mesoscopic TiO2 (m-TiO2) film was formed via the wetting-induced infiltration of MHP solution in the m-TiO2 film via a green ultrasonic spray coating process using a non-hazardous solvent. The systematic investigation of the behavior of ultrasonic-sprayed MHP micro-drops on the m-TiO2 film disclosed that the void-free MHP layer on the m-TiO2 film can be formed if the following conditions are satisfied: (1) the sprayed micro-drops are merged and wetted in the mesoscopic scaffold of the m-TiO2 film, (2) the MHP solution infiltrated into the m-TiO2 film by wetting is leveled to make a smooth wet MHP film, and (3) the smooth wet MHP film is promptly heat treated to eliminate dewetting and the coffee ring effect by convective flow in order to form a uniform void-free MHP layer. A void-free MHP layer on the m-TiO2 film was formed under optimal ultrasonic spray coating conditions of substrate temperature of ∼30 °C, spray flow rate of ∼11 mL h-1, nozzle to substrate distance of ∼8 cm, and MHP solution-concentration of ∼0.6 M under a fixed scan speed of 30 mm s-1 and purged N2 carrier gas pressure of 0.02 MPa. The mesoscopic MHP solar cells with an aperture area of 0.096, 1, 25, and 100 cm2 exhibited 17.14%, 16.03%, 12.93%, and 10.67% power conversion efficiency at 1 sun condition, respectively.
| S-EPMC9056762 | biostudies-literature