Preparation and In Vitro Evaluation of Levofloxacin-Loaded Floating Tables Using Various Rate-Controlling Agents
Ontology highlight
ABSTRACT:
SUBMITTER: Sabei F
PROVIDER: S-EPMC10652821 | biostudies-literature | 2023 Nov
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Cerium oxide nanoparticles (nanoceria), well known for their pro- and antioxidant features, have been recently proposed for the treatment of several pathologies, including cancer and neurodegenerative diseases. However, interaction between nanoceria and biological molecules such as proteins and lipids, short blood circulation time, and the need of a targeted delivery to desired sites are some aspects that require strong attention for further progresses in the clinical application of these nanoparticles. The aim of this work is the encapsulation of nanoceria into a liposomal formulation in order to improve their therapeutic potentialities. After the preparation through a reverse-phase evaporation method, size, Z-potential, morphology, and loading efficiency of nanoceria-loaded liposomes were investigated. Finally, preliminary in vitro studies were performed to test cell uptake efficiency and preserved antioxidant activity. Nanoceria-loaded liposomes showed a good colloidal stability, an excellent biocompatibility, and strong antioxidant properties due to the unaltered activity of the entrapped nanoceria. With these results, the possibility of exploiting liposomes as carriers for cerium oxide nanoparticles is demonstrated here for the first time, thus opening exciting new opportunities for in vivo applications.
| S-EPMC5618387 | biostudies-literature
Project description:Addressing antimicrobial resistance requires new approaches in various disciplines of pharmaceutical sciences. The fluoroquinolone levofloxacin (LEV) plays an important role in the therapy of lung infections. However, its effectiveness is limited by its severe side effects involving tendinopathy, muscle weakness and psychiatric disturbance. Therefore, there is a need for the development of an effective formulation of LEV with reduced systemic drug concentrations, thereby also reducing the consumption and excretion of antibiotics or metabolites. This study aimed for the development of a pulmonary-applicable LEV formulation. Co-amorphous LEV-L-arginine (ARG) particles were prepared by spray drying and characterised by scanning electron microscopy, modulated differential scanning calorimetry, X-ray powder diffraction, Fourier-transform infrared spectroscopy and next generation impactor analysis. Co-amorphous LEV-ARG salts were produced independently of varying process parameters. The use of 30% (v/v) ethanol as a solvent led to better aerodynamic properties compared to an aqueous solution. With a mass median aerodynamic diameter of just over 2 µm, a fine particle fraction of over 50% and an emitted dose of over 95%, the product was deemed suitable for a pulmonary application. The created process was robust towards the influence of temperature and feed rate, as changing these parameters did not have a significant influence on the critical quality attributes, indicating the feasibility of producing pulmonary-applicable co-amorphous particles for sustainable antibiotic therapy.
| S-EPMC10302593 | biostudies-literature
Project description:Doxorubicin (DOX) is an effective anthracycline antibiotic drug which is commonly used in a broad range cancer therapy. However, due to dose depending side effects and toxicity to non-cancerous tissues, its clinical applications are restricted. To overcome these limitations, human serum albumin (HSA) has been investigated as a biocompatible drug delivery vehicle. In this study, human serum albumin submicron particles (HSA-MPs) were fabricated by using the Co-precipitation-Crosslinking-Dissolution technique (CCD technique) and DOX was loaded into the protein particles by absorption. DOX-HSA-MPs showed uniform peanut-like shape, submicron size and negative zeta-potential (-13 mV). The DOX entrapment efficiency was 25% of the initial amount. The in vitro release in phosphate buffered saline pH 7.4 was less than 1% within 5 h. In contrast, up to 40% of the entrapped DOX was released in presence of a protein digesting enzyme mixture (Pronase®) within the same time. In addition, in vitro cytotoxicity and cellular uptake of DOX-HSA-MPs were evaluated using the lung carcinoma cell line A549. The results demonstrated that DOX-HSA-MPs reduced the cell metabolic activities after 72 h. Interestingly, DOX-HSA-MPs were taken up by A549 cells up to 98% and localized in the cell lysosomal compartment. This study suggests that DOX-HSA-MPs which was fabricated by CCD technique is seen as a promising biopolymer particle as well as a viable alternative for drug delivery application to use for cancer therapy.
| S-EPMC7150780 | biostudies-literature
Project description:SBA-15-loaded RuCo alloy nanoparticle catalysts (RuxCoy/S15-SU) for the efficient catalysis of hydrogen storage by various liquid organic hydrogen carriers (LOHCs) were prepared via strong electrostatic adsorption (SEA)-ultrasonic in-situ reduction (UR) technology. The above prepared catalysts were subjected to a series of characterization, such as XPS, H2-TPD/TPR, N2 adsorption-desorption, ICP, CO-chemisorption, FT-IR, XRD and TEM. Ru3+ and Co2+ were evenly anchored on the surface of SBA-15 by SEA, and ultrafine RuCo alloy nanoparticles were formed by UR without any chemical reducing or stabilizing agents. The addition of Co enhanced the dispersion and antioxidant capacity of the RuCo alloy NPs with an average particle size of 2.07 nm and increased the number of catalytically active sites. The synergistic effect of ultrafine particle size and electron transfer between Co and Ru improved the catalytic performance of monobenzyltoluene (MBT) for hydrogen storage. SEA-UR technology strengthened the coordination effect between RuCo alloy NPs and Si-OH, which enhanced the catalytic stability. H2-TPD and H2-TPR indicated that the addition of Co led to more activated H2 to produce hydrogen overflow. For the hydrogenation of MBT, the produced Ru2Co1/S15-SU showed excellent catalytic performance. The hydrogen storage efficiency of MBT was 99.98 % under 110 °C and 6 MPa H2 for 26 min, and the TOF was 145 min-1, which is significantly superior to that of Ru/S15-SU catalyst and that reported in the literature. The hydrogen storage efficiency was still as high as 99.7 % after ten cycles, which was much better than that of Ru/S15-SU and commercial 5 wt% Ru/Al2O3. Ru2Co1/S15-SU is also suitable for efficiently catalyzing hydrogen storage of N-ethylcarbazole, dibenzyltoluene and acenaphthene.
| S-EPMC10998196 | biostudies-literature
Project description:Paclitaxel (Taxol(®)) is an important anticancer drug in clinical use for treatment of a variety of cancers. Because of its low solubility, it is formulated in high concentration in Cremophor EL(®) which induces hypersensitivity reactions. In this study, targeted delivery of paclitaxel-loaded nanoparticles was prepared by a desolvation procedure, crosslinked on the wall material of bovine serum albumin, and subsequently decorated by folic acid. The characteristics of the nanoparticles, such as amount of folate conjugation, surface morphology, drug entrapment efficiency, drug loading efficiency, and release kinetics were investigated in vitro. The targeting effect was investigated in vitro by cancer cell uptake of fluorescein isothiocyanate-labeled nanoparticles. The spherical nanoparticles obtained were negatively charged with a zeta potential of about -30 mV, and characterized around 210 nm with a narrow size distribution. Drug entrapment efficiency and drug loading efficiency were approximately 95.3% and 27.2%, respectively. The amount of folate conjugation was 9.22 μg/mg of bovine serum albumin. The folate-decorated nanoparticles targeted a human prostate cancer cell line effectively.
| S-EPMC2948946 | biostudies-literature
Project description:The purpose of this study was to prepare dexamethasone-loaded polymeric nanoparticles and evaluate their potential for transport across human placenta. Statistical modeling and factorial design was applied to investigate the influence of process parameters on the following nanoparticle characteristics: particle size, polydispersity index, zeta potential, and drug encapsulation efficiency. Dexamethasone and nanoparticle transport was subsequently investigated using the BeWo b30 cell line, an in vitro model of human placental trophoblast cells, which represent the rate-limiting barrier for maternal-fetal transfer. Encapsulation efficiency and drug transport were determined using a validated high performance liquid chromatography method. Nanoparticle morphology and drug encapsulation were further characterized by cryo-transmission electron microscopy and X-ray diffraction, respectively. Nanoparticles prepared from poly(lactic-co-glycolic acid) were spherical, with particle sizes ranging from 140 to 298 nm, and encapsulation efficiency ranging from 52 to 89%. Nanoencapsulation enhanced the apparent permeability of dexamethasone from the maternal compartment to the fetal compartment more than 10-fold in this model. Particle size was shown to be inversely correlated with drug and nanoparticle permeability, as confirmed with fluorescently labeled nanoparticles. These results highlight the feasibility of designing nanoparticles capable of delivering medication to the fetus, in particular, potential dexamethasone therapy for the prenatal treatment of congenital adrenal hyperplasia.
| S-EPMC3800161 | biostudies-literature
Project description:A sodium carboxy-methylcellulose (CMC)/chitosan (CS) composite sponge as drug carrier was prepared, and its structure and functions were investigated. Samples with different CMC/chitosan ratios and under different pH conditions were synthesized via a freeze-drying method. The microstructure of the dried sponges was analyzed by Scanning Electron Microscope (SEM). Molecule interactions between polymers were confirmed by Fourier transform infrared (FTIR) spectra and Thermal gravimetric analyze (TGA). The swelling degree, weight loss, in vitro drug release behavior and antibacterial property of the sponges were determined as well. The results showed that the CMC/chitosan ratio and the pH value significantly affected the appearance of the blending solution and the microstructure of the final product, and also affected the sponge's degradation behavior, drug-loading capacity and the antibacterial activity. Gentamicin (GEN) as a hydrophilic model drug was remarkably superior to the other two hydrophobic drugs, ibuprofen (IBU) and roxithromycin (ROX), with respect to in vitro releasing. Moreover, higher CMC content and lower pH value of the sponge were confirmed to lead a larger loading for GEN. The bacteriostatic experiment showed a strong antimicrobial ability of GEN-loaded sponges on inhibiting Escherichia coli.
| S-EPMC6197682 | biostudies-literature
Project description:A novel polymer of poloxamer188-b-PCL was synthesized via a ring-opening polymerization. Fourier transform infrared spectroscopy (FTIR), Raman, and 1H nuclear magnetic resonance (1H NMR) spectra were used to study the structures of obtained poloxamer188-b-PCL. The thermo-stability of poloxamer188 -b-PCL was carried out with a thermal gravimetric analyzer (TGA), and cytotoxicity was obtained using the CCK8 method. Cargo-free and curcumin (CUR)-loaded poloxamer188-b-PCL NPs were fabricated via the solvent evaporation method. The morphology, particle size distribution, and stability of cargo-free NPs were studied with a scanning electron microscope (SEM) and laser particle analyzer. The in vitro radioprotection activity of CUR-loaded NPs was performed. FTIR, Raman, and 1H NMR spectra confirmed that poloxamer188-b-PCL was obtained. TGA curves suggested poloxamer188-b-PCL had better thermo-stability than original poloxamer188. Cell tests suggested that the cargo-free NPs had no cytotoxicity. SEM image showed that the cargo-free NPs were spherical with a diameter of 100 nm. Free radical scavenging experiments proved that CUR-loaded NPs had better antioxidant activity than CUR solutions. CUR-loaded NPs could be detected in all tissues, including liver, kidneys and lung. In summary, this work demonstrated a feasibility of developing an injective formulation of CUR and provided a protection agent in caner radiotherapy.
| S-EPMC7174741 | biostudies-literature
Project description:In the present study, we developed a self-assembled biodegradable polyglutamic acid (PGA)-based formulation of amphotericin B (AmB) and evaluated its in vitro antifungal potential against Candida albicans. The AmB-loaded PGA nanoparticles were prepared in-house and had a mean size dimension of around 98±2 nm with a zeta potential of -35.2±7.3 mV. Spectroscopic studies revealed that the drug predominantly acquires an aggregated form inside the formulation with an aggregation ratio above 2. The PGA-based AmB formulation was shown to be highly stable in phosphate-buffered saline as well as in serum (only 10%-20% of the drug was released after 10 days). The AmB-PGA nanoparticles were less toxic to red blood cells (<15% lysis at an AmB concentration of 100 μg/mL after 24 hours) when compared with Fungizone(®), a commercial antifungal product. An MTT assay showed that the viability of mammalian cells (KB and RAW 264.7) was negligibly affected at AmB concentrations as high as 200 μg/mL. Histopathological examination of mouse kidney revealed no signs of tissue necrosis. The AmB-PGA formulation showed potent antimicrobial activity similar to that of Fungizone against C. albicans. Interestingly, AmB-bearing PGA nanoparticles were found to inhibit biofilm formation to a considerable extent. In summary, AmB-PGA nanoparticles showed highly attenuated toxicity when compared with Fungizone, while retaining equivalent active antifungal properties. This study indicates that the AmB-PGA preparation could be a promising treatment for various fungal infections.
| S-EPMC4356689 | biostudies-literature
Project description:Garcinol (GAR) is a naturally occurring polyisoprenylated phenolic compound. It has been recently investigated for its biological activities such as antioxidant, anti-inflammatory, anti ulcer, and antiproliferative effect on a wide range of human cancer cell lines. Though the outcomes are very promising, its extreme insolubility in water remains the main obstacle for its clinical application. Herein we report the formulation of GAR entrapped PLGA nanoparticles by nanoprecipitation method using vitamin E TPGS as an emulsifier. The nanoparticles were characterized for size, surface morphology, surface charge, encapsulation efficiency and in vitro drug release kinetics. The MTT assay depicted a high amount of cytotoxicity of GAR-NPs in B16F10, HepG2 and KB cells. A considerable amount of cell apoptosis was observed in B16f10 and KB cell lines. In vivo cellular uptake of fluorescent NPs on B16F10 cells was also investigated. Finally the GAR loaded NPs were radiolabeled with technetium-99m with >95% labeling efficiency and administered to B16F10 melanoma tumor bearing mice to investigate the in vivo deposition at the tumor site by biodistribution and scintigraphic imaging study. In vitro cellular uptake studies and biological evaluation confirm the efficacy of the formulation for cancer treatment.
| S-EPMC5428804 | biostudies-literature