Emulsions Using a Vortex-Based Cavitation Device: Influence of Number of Passes, Pressure Drop, and Device Scale on Droplet Size Distributions
Ontology highlight
ABSTRACT:
SUBMITTER:
PROVIDER: S-EPMC10655102 | biostudies-literature | 2022 Dec
REPOSITORIES: biostudies-literature
Similar Datasets
Project description: Not available
| S-EPMC10958511 | biostudies-literature
Project description:Hydrodynamic cavitation in a Venturi tube produces luminescence, and the luminescence intensity reaches a maximum at a certain cavitation number, which is defined by upstream pressure, downstream pressure, and vapor pressure. The luminescence intensity of hydrodynamic cavitation can be enhanced by optimizing the downstream pressure at a constant upstream pressure condition. However, the reason why the luminescence intensity increases and then decreases with an increase in the downstream pressure remains unclear. In the present study, to clarify the mechanism of the change in the luminescence intensity with cavitation number, the luminescence produced by the hydrodynamic cavitation in a Venturi tube was measured, and the hydrodynamic cavitation was precisely observed using high-speed photography. The sound velocity in the cavitating flow field, which affects the aggressive intensity of the cavitation, was evaluated. The collapse of vortex cavitation was found to be closely related to the luminescence intensity of the hydrodynamic cavitation. A method to estimate the luminescence intensity of the hydrodynamic cavitation considering the sound velocity was developed, and it was demonstrated that the estimated luminescence intensity agrees well with the measured luminescence intensity.
| S-EPMC7786618 | biostudies-literature
Project description:There is growing interest in generating micro- or nanobubbles for enhancing aeration. Small bubbles not only enhance the interfacial area for gas-liquid mass transfer but also may enhance the equilibrium solubility if the size of the bubbles is small enough. In this note, we demonstrate the use of a vortex-based hydrodynamic cavitation device (VD) for generating small bubbles and enhancing aeration. Experimental results for conventional aeration and aeration with VD operated under three different conditions are presented. A reference case of potential degassing because of the low pressure generated in the cavitation device was also investigated. Experiments were carried out in a bubble column using DI water as the liquid phase. The dissolved oxygen (DO) concentration was measured using a precalibrated dissolved oxygen probe. Measurements of transient profiles of dissolved gas concentrations were carried out under different operating conditions. A generalized framework to analyze mass transfer in the presence of degassing, absorption, and desorption (via top surface or large bubbles) is developed and used for interpreting the experimental data. The per-pass degassing factor of VD was found to increase with the power dissipation [∝ (P-P c)0.4, where P is power dissipation and P c is the critical power beyond which degassing starts]. The aeration generated by VD was found to realize 30% higher DO concentration beyond the equilibrium solubility at atmospheric conditions. The bubble sizes estimated from the steady-state DO concentration were in the range from 80 to 200 μm for the operating parameters considered in this work. The presented results demonstrate the effectiveness of VD for enhancing aeration and will be useful for intensifying gas-liquid processes.
| S-EPMC11822708 | biostudies-literature
Project description:Macroalgae have a tremendous potential to become an important renewable resource for valuable biomolecules and chemicals. New and improved ways of cell disruption and of enhancing rate as well as yield of extraction of valuable products from macroalgae are needed to fully realise this potential. In this work, hydrodynamic cavitation (HC) was used for intensifying rate and yield of extraction of phycoerythrin, proteins and carbohydrates from marine macroalgae Palmaria palmata. We use vortex-based HC devices which do not use small restrictions like orifice-based HC devices or moving parts like rotor-stator based HC devices. A bench scale setup with a nominal slurry flow rate of 20 LPM was established. Dried and powdered macroalgae was used. Influence of key operating parameters like pressure drop and number of passes on extraction performance (the rate and yield) was measured. A simple, yet effective model was developed and used for interpreting and describing experimental data. The results indicate that there exists an optimum pressure drop across the device at which extraction performance is maximum. The extraction performance with HC was found to be significantly better than the stirred vessels. HC has resulted in 2 to 20 times improvement in the rate of extraction of phycoerythrin (R-PE), proteins and carbohydrates. Based on the results obtained in this work, pressure drop of 200 kPa and number of passes through the HC devices of about 100 were found to be most effective for HC-assisted intensified extraction from macroalgae. The presented results and model will be useful for harnessing vortex-based HC devices for intensifying the extraction of valuable products from macroalgae.
| S-EPMC9996097 | biostudies-literature
Project description: Not available
| S-EPMC11843604 | biostudies-literature
Project description:Vortex-based hydrodynamic cavitation devices are being used in a wide range of applications. However, adequate information on the design of such devices is not available. In this work, we have computationally investigated the influence of key design parameters such as the aspect ratio of the vortex chamber, the number of tangential inlets and the shape of the device on resulting flow characteristics and cavitation. Experiments were carried out to validate key findings from the computational studies. These investigations revealed that the aspect ratio of the vortex chamber as six may be considered as optimum. The performance of single and multiple inlet devices was found to be comparable at the same pressure drop (that is at same energy consumption per m3). Scale-up with a geometric similarity led to a reduction in the extent of cavitation for same energy consumption per m3. For facilitating scale-out option, an attempt was made to simplify the configuration of the vortex-based cavitation device. Computational results indicated that the cavitation performance of simplified configuration was not significantly inferior. A case of the formation of liquid-liquid emulsion was taken as a test case for evaluation of a modified cavitation device based on the present investigations. The droplet size distributions of emulsions generated by both the devices indicate that the proposed simplified configuration, which may facilitate fabrication and offer integrated scale-out options, performs almost at par with a complex configuration. The presented results will be useful for optimising designs of vortex-based hydrodynamic cavitation devices/ reactors.
| S-EPMC10767635 | biostudies-literature
Project description:Limitations in current capabilities to constrain aerosols adversely impact atmospheric simulations. Typically, aerosol burdens within models are constrained employing satellite aerosol optical properties, which are not available under cloudy conditions. Here we set the first steps to overcome the long-standing limitation that aerosols cannot be constrained using satellite remote sensing under cloudy conditions. We introduce a unique data assimilation method that uses cloud droplet number (N(d)) retrievals to improve predicted below-cloud aerosol mass and number concentrations. The assimilation, which uses an adjoint aerosol activation parameterization, improves agreement with independent N(d) observations and with in situ aerosol measurements below shallow cumulus clouds. The impacts of a single assimilation on aerosol and cloud forecasts extend beyond 24 h. Unlike previous methods, this technique can directly improve predictions of near-surface fine mode aerosols responsible for human health impacts and low-cloud radiative forcing. Better constrained aerosol distributions will help improve health effects studies, atmospheric emissions estimates, and air-quality, weather, and climate predictions.
| S-EPMC3409723 | biostudies-literature
Project description:Hydrodynamic cavitation (HC), a promising technology for enhancing processes, has shown distinct effectiveness and versatility in various chemical and environmental applications. The recently developed advanced rotational hydrodynamic cavitation reactors (ARHCRs), employing cavitation generation units (CGUs) to induce cavitation, have demonstrated greater suitability for industrial-scale applications than conventional devices. However, the intricate interplay between vortex and cavitation, along with its spatial-temporal evolution in the complex flow field of ARHCRs, remains inadequately elucidated. This study investigated the interaction mechanism between cavitation and vortex in a representative interaction-type ARHCR for the first time using the "simplified flow field strategy" and the Q-criterion. The findings reveal that the flow instability caused by CGUs leads to intricate helical and vortex flows, subsequently giving rise to both sheet and vortex cavitation. Subsequently, utilizing the Q-criterion, the vortex structures are identified to be concentrated inside and at CGU edges with evolution process of mergence and separation. These vortex structures directly influence the shape and dimensions of cavities, establishing a complex interaction with cavitation. Lastly, the vorticity transport equation analysis uncovered that the stretching and dilatation terms dominate the vorticity transport process. Simultaneously, the baroclinic term focuses on the vapor-liquid interface, characterized by significant alterations in density and pressure gradients. These findings contribute to a better comprehension of the cavitation-vortex interaction in ARHCRs.
| S-EPMC11636836 | biostudies-literature
Project description:The pharmaceutical industry has made improvements to mitigate protein degradation during the drug manufacturing process, storage, and transportation. However, there is less quality control after the manufacturer releases the drug. Previous research has shown that drop shock due to mishandling and accidental dropping of therapeutic vials may cause cavitation, aggregation, and particle formation. In this study, the cavitation behavior of Deionized (DI) water and 10mM L-Histidine buffer solution which were subjected to drop shock by hand dropping were investigated to study the effects of vial materials, solutions, fill volumes, drop heights, and internal vial geometries. A Phantom v7 high-speed camera was used to record images at a rate of 66,700 frames per second of the vials as they underwent drop shock. These videos were then reviewed to find the angle of impact, and to determine if there was cavitation. The results indicate that decreasing fill height by using a smaller fill volume or larger diameter vials were found to mitigate cavitation across drop heights. Secondly, results indicate there is a significant difference between the cavitation behavior of glass and plastic vials, and plastic had more cavitation cases. Lastly, there was not a significant difference in the occurrence of cavitation between DI water and L-Histidine buffer solution.
| S-EPMC6915723 | biostudies-literature
Project description:Biological cells use droplets to separate components and spatially control their interior. Experiments demonstrate that the complex, crowded cellular environment affects the droplet arrangement and their sizes. To understand this behavior, we here construct a theoretical description of droplets growing in an elastic matrix, which is motivated by experiments in synthetic systems where monodisperse emulsions form during a temperature decrease. We show that large droplets only form when they break the surrounding matrix in a cavitation event. The energy barrier associated with cavitation stabilizes small droplets on the order of the mesh size and diminishes the stochastic effects of nucleation. Consequently, the cavitated droplets have similar sizes and highly correlated positions. In particular, we predict the density of cavitated droplets, which increases with faster cooling, as in the experiments. Our model also suggests how adjusting the cooling protocol and the density of nucleation sites affects the droplet size distribution. In summary, our theory explains how elastic matrices affect droplets in the synthetic system, and it provides a framework for understanding the biological case.
| S-EPMC8501854 | biostudies-literature