Project description:Syringaresinol was synthesized in a one-pot conversion containing eugenol oxidase (EUGO) and horseradish peroxidase (HRP) using the relatively cheap 2,6-dimethoxy-4-allylphenol as a substrate. This conversion is fully coupled as the hydrogen peroxide generated from the reaction of EUGO with the substrate is utilized by the HRP to convert the formed sinapyl alcohol into syringaresinol. To improve the performance of EUGO on 2,6-dimethoxy-4-allylphenol, structure-inspired enzyme engineering was performed. This yielded the I427A EUGO mutant that is significantly more efficient with 2,6-dimethoxy-4-allylphenol. The I427A EUGO mutant together with HRP were capable of efficiently producing syringaresinol as a major product. After optimization and upscaling the conversion to a semipreparative scale (1 gr), syringaresinol was obtained in 81% yield.
Project description:The one-pot synthesis of a target molecule in the same reaction vessel is widely considered to be an efficient approach in synthetic organic chemistry. In this review, the characteristics and limitations of various one-pot syntheses of biologically active molecules are explained, primarily involving organocatalytic methods as key tactics. Besides catalysis, the pot-economy concepts presented herein are also applicable to organometallic and organic reaction methods in general.
Project description:Electron-rich phenolic substrates can be derived from the depolymerisation of lignin feedstocks. Direct biotransformations of the hydroxycinnamic acid monomers obtained can be exploited to produce high-value chemicals, such as α-amino acids, however the reaction is often hampered by the chemical autooxidation in alkaline or harsh reaction media. Regioselective O-methyltransferases (OMTs) are ubiquitous enzymes in natural secondary metabolic pathways utilising an expensive co-substrate S-adenosyl-l-methionine (SAM) as the methylating reagent altering the physicochemical properties of the hydroxycinnamic acids. In this study, we engineered an OMT to accept a variety of electron-rich phenolic substrates, modified a commercial E. coli strain BL21 (DE3) to regenerate SAM in vivo, and combined it with an engineered ammonia lyase to partake in a one-pot, two whole cell enzyme cascade to produce the l-DOPA precursor l-veratrylglycine from lignin-derived ferulic acid.
Project description:Electron-rich phenolic substrates can be derived from the depolymerisation of lignin feedstocks. Direct biotransformations of the hydroxycinnamic acid monomers obtained can be exploited to produce high-value chemicals, such as α-amino acids, however the reaction is often hampered by the chemical autooxidation in alkaline or harsh reaction media. Regioselective O-methyltransferases (OMTs) are ubiquitous enzymes in natural secondary metabolic pathways utilising an expensive co-substrate S-adenosyl-l-methionine (SAM) as the methylating reagent altering the physicochemical properties of the hydroxycinnamic acids. In this study, we engineered an OMT to accept a variety of electron-rich phenolic substrates, modified a commercial E. coli strain BL21 (DE3) to regenerate SAM in vivo, and combined it with an engineered ammonia lyase to partake in a one-pot, two whole cell enzyme cascade to produce the l-DOPA precursor l-veratrylglycine from lignin-derived ferulic acid.
Project description:A novel and efficient one-pot system for green production of artificial lignin bio-composites has been developed. Monolignols such as sinapyl (SA) and coniferyl (CA) alcohols were linked together with caffeic acid (CafAc) affording a polymeric network similar with natural lignin. The interaction of the dissolved SA/CA with CafAc already bound on a solid support (SC2/SC6-CafAc) allowed the attachment of the polymeric product direct on the support surface (SC2/SC6-CafAc-L1 and SC2/SC6-CafAc-L2, from CA and SA, respectively). Accordingly, this procedure offers the advantage of a simultaneous polymer production and deposition. Chemically, oxi-copolymerization of phenolic derivatives (SA/CA and CAfAc) was performed with H2O2 as oxidation reagent using peroxidase enzyme (2-1B mutant of versatile peroxidase from Pleurotus eryngii) as catalyst. The system performance reached a maximum of conversion for SA and CA of 71.1 and 49.8%, respectively. The conversion is affected by the system polarity as resulted from the addition of a co-solvent (e.g., MeOH, EtOH, or THF). The chemical structure, morphology, and properties of the bio-composites surface were investigated using different techniques, e.g., FTIR, TPD-NH3, TGA, contact angle, and SEM. Thus, it was demonstrated that the SA monolignol favored bio-composites with a dense polymeric surface, high acidity, and low hydrophobicity, while CA allowed the production of thinner polymeric layers with high hydrophobicity.
Project description:The combination of biocatalysis and chemo-catalysis increasingly offers chemists access to more diverse chemical architectures. Here, we describe the combination of a toolbox of chiral-amine-producing biocatalysts with a Buchwald-Hartwig cross-coupling reaction, affording a variety of α-chiral aniline derivatives. The use of a surfactant allowed reactions to be performed sequentially in the same flask, preventing the palladium catalyst from being inhibited by the high concentrations of ammonia, salts, or buffers present in the aqueous media in most cases. The methodology was further extended by combining with a dual-enzyme biocatalytic hydrogen-borrowing cascade in one pot to allow for the conversion of a racemic alcohol to a chiral aniline.
Project description:BackgroundPinoresinol is a high-value plant-derived lignan with multiple health supporting effects. Enantiomerically pure pinoresinol can be isolated from natural sources, but with low efficiency. Most chemical and biocatalytic approaches that have been described for the synthesis of pinoresinol furnish the racemic mixture. In this study we devised a three-step biocatalytic cascade for the production of enantiomerically pure pinoresinol from the cheap compound eugenol. Two consecutive oxidations of eugenol through vanillyl-alcohol oxidase and laccase are followed by kinetic resolution of racemic pinoresinol by enantiospecific pinoresinol reductases.ResultsThe addition of the enantiospecific pinoresinol reductase from Arabidopsis thaliana for kinetic resolution of (±)-pinoresinol to an in vitro cascade involving the vanillyl-alcohol oxidase from Penicillium simplicissimum and the bacterial laccase CgL1 from Corynebacterium glutamicum resulted in increasing ee values for (+)-pinoresinol; however, an ee value of 34% was achieved in the best case. The ee value could be increased up to ≥ 99% by applying Escherichia coli-based whole-cell biocatalysts. The optimized process operated in a one-pot "two-cell" sequential mode and yielded 876 µM (+)-pinoresinol with an ee value of 98%. Switching the reductase to the enantiospecific pinoresinol lariciresinol reductase from Forsythia intermedia enabled the production of 610 µM (-)-pinoresinol with an ee value of 97%.ConclusionA new approach for the synthesis of enantiomerically pure (+)- and (-)-pinoresinol is described that combines three biotransformation steps in one pot. By switching the reductase in the last step, the whole-cell biocatalysts can be directed to produce either (+)- or (-)-pinoresinol. The products of the reductases' activity, (-)-lariciresinol and (-)-secoisolariciresinol, are valuable precursors that can also be applied for the synthesis of further lignans.
Project description:We explore biocatalytic aldehyde generation under aqueous conditions, concomitantly delivering access to a one-pot Wittig reaction using stabilized phosphoranes and granting diverse alkene products. Using a recombinant choline oxidase mutant, we first undertake biocatalytic alcohol oxidation across a range of functional aliphatic primary alcohols, demonstrating a remarkable substrate tolerance for this enzyme, including chloride, bromide, azide, S-methyl, and alkynyl groups. Following this, we extend capability and deliver a practicable milligram-scale one-pot Wittig reaction in water.
Project description:In this work, we proved the efficient synthesis of a bio-based hyper-branched polyphenol from a modified lignin degradation fragment. Protocatechuic acid was readily obtained from vanillin, a lignin degradation product, via alkaline conditions, and further polymerised to yield high molecular weight hyperbranched phenol terminated polyesters. Vanillic acid was also subjected to similar polymerisation conditions in order to compare polymerisation kinetics and differences between linear and hyperbranched polymers. Overall, protocatechuic acid was faster to polymerise and more thermostable with a degradation temperature well above linear vanillic acid polyester. Both polymers exhibited important radical scavenging activity (RSA) compared to commercial antioxidant and present tremendous potential for antioxidant applications.