Dataset Information

Trimethylsilyl Compounds for the Interfacial Stabilization of Thiophosphate-Based Solid Electrolytes in All-Solid-State Batteries.

ABSTRACT: Argyrodite-type Li₆ PS₅ Cl (LPSCl) has attracted much attention as a solid electrolyte for all-solid-state batteries (ASSBs) because of its high ionic conductivity and good mechanical flexibility. LPSCl, however, has challenges of translating research into practical applications, such as irreversible electrochemical degradation at the interface between LPSCl and cathode materials. Even for Li-ion batteries (LIBs), liquid electrolytes have the same issue as electrolyte decomposition due to interfacial instability. Nonetheless, current LIBs are successfully commercialized because functional electrolyte additives give rise to the formation of stable cathode-electrolyte interphase (CEI) and solid-electrolyte interphase (SEI) layers, leading to supplementing the interfacial stability between electrolyte and electrode. Herein, inspired by the role of electrolyte additives for LIBs, trimethylsilyl compounds are introduced as solid electrolyte additives for improving the interfacial stability between sulfide-based solid electrolytes and cathode materials. 2-(Trimethylsilyl)ethanethiol (TMS-SH), a solid electrolyte additive, is oxidatively decomposed during charge, forming a stable CEI layer. As a result, the CEI layer derived from TMS-SH suppresses the interfacial degradation between LPSCl and LiCoO₂ , thereby leading to the excellent electrochemical performance of Li | LPSCl | LiCoO₂ , such as superior cycle life over 2000 cycles (85.0% of capacity retention after 2000 cycles).

SUBMITTER: Kim K

PROVIDER: S-EPMC10667807 | biostudies-literature | 2023 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Trimethylsilyl Compounds for the Interfacial Stabilization of Thiophosphate-Based Solid Electrolytes in All-Solid-State Batteries.

Kim Kanghyeon K Kim Taehun T Song Gawon G Lee Seonghyun S Jung Min Soo MS Ha Seongmin S Ha A Reum AR Lee Kyu Tae KT

Advanced science (Weinheim, Baden-Wurttemberg, Germany) 20231022 33

Argyrodite-type Li<sub>6</sub> PS<sub>5</sub> Cl (LPSCl) has attracted much attention as a solid electrolyte for all-solid-state batteries (ASSBs) because of its high ionic conductivity and good mechanical flexibility. LPSCl, however, has challenges of translating research into practical applications, such as irreversible electrochemical degradation at the interface between LPSCl and cathode materials. Even for Li-ion batteries (LIBs), liquid electrolytes have the same issue as electrolyte decom ...[more]

PMID: 37867236

Similar Datasets

Project description:Safety concerns of traditional liquid electrolytes, especially when paired with lithium (Li) metal anodes, have stimulated research of solid polymer electrolytes (SPEs) to exploit the superior thermal and mechanical properties of polymers. Polyphosphazenes are primarily known for their use as flame retardant materials and have demonstrated high Li-ion conductivity owing to their highly flexible P = N backbone which promotes Li-ion conduction via inter- and intrachain hopping along the polymer backbone. While polyphosphazenes are largely unexplored as SPEs in the literature, a few existing examples showed promising ionic conductivity. By anchoring the anion to the polymer backbone, one may primarily allow the movement of Li ions, alleviating the detrimental effects of polarization that are common in conventional dual-ion conducting SPEs. Anion-anchored SPEs, known as single Li-ion conducting solid polymer electrolytes (SLiC-SPEs), exhibit high Li-ion transference numbers (tLi+), which limits Li dendrite growth, thus further increasing the safety of SPEs. However, previously reported SLiC-SPEs suffer from inadequate ionic conductivity, small electrochemical stability windows (ESWs), and limited cycling stability. Herein, we report three polyphosphazene-based SLiC-SPEs comprising lithiated polyphosphazenes. The SLiC polyphosphazenes were prepared through a facile synthesis route, opening the door for enhanced tunability of polymer properties via facile macromolecular nucleophilic substitution and subsequent lithiation. State-of-the-art characterization techniques, such as differential scanning calorimetry (DSC), electrochemical impedance spectroscopy (EIS), and solid-state nuclear magnetic resonance spectroscopy (ssNMR) were employed to probe the effect of the polymer structure on Li-ion dynamics and other electrochemical properties. Produced SPEs showed thermal stability up to ∼208 °C with ionic conductivities comparable to that of the best-reported SLiC-SPEs that definitively comprise no solvents or plasticizers. Among the three lithiated polyphosphazenes, the SPE containing dilithium poly[bis(trifluoroethylamino)phosphazene] (pTFAP2Li) exhibited the most promising electrochemical characteristics with tLi+ of 0.76 and compatibility with both Li metal anodes and LiFePO4 (LFP) cathodes; through 40 cycles at 100 °C, the PEO-pTFAP2Li blend showed 81.2% capacity utilization and 86.8% capacity retention. This work constitutes one of the first successful demonstrations of the cycling performance of a true all-solid-state Li-metal battery using SLiC polyphosphazene SPEs.

Dataset Information

Trimethylsilyl Compounds for the Interfacial Stabilization of Thiophosphate-Based Solid Electrolytes in All-Solid-State Batteries.

Publications

Trimethylsilyl Compounds for the Interfacial Stabilization of Thiophosphate-Based Solid Electrolytes in All-Solid-State Batteries.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets