Dye-sensitized solar cells based on highly catalytic CNTs/Ti3C2Tx MXenes composite counter electrode† † Electronic supplementary information (ESI) available. See DOI: https://doi.org/10.1039/d3ra06814e
Ontology highlight
ABSTRACT:
SUBMITTER: Hu Z
PROVIDER: S-EPMC10685336 | biostudies-literature | 2023 Nov
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Dye-sensitized solar cells (DSSCs) are solar energy conversion devices with high efficiency and simple fabrication procedures. Developing transparent counter electrode (CE) materials for bifacial DSSCs can address the needs of window-type building-integrated photovoltaics (BIPVs). Herein, transparent organic-inorganic hybrid composite films of molybdenum disulfide and poly(3,4-ethylenedioxythiophene) (MoS2/PEDOT) are prepared to take full advantage of the conductivity and electrocatalytic ability of the two components. MoS2 is synthesized by hydrothermal method and spin-coated to form the MoS2 layer, and then PEDOT films are electrochemically polymerized on top of the MoS2 film to form the composite CEs. The DSSC with the optimized MoS2/PEDOT composite CE shows power conversion efficiency (PCE) of 7% under front illumination and 4.82% under back illumination. Compared with the DSSC made by the PEDOT CE and the Pt CE, the DSSC fabricated by the MoS2/PEDOT composite CE improves the PCE by 10.6% and 6.4% for front illumination, respectively. It proves that the transparent MoS2/PEDOT CE owes superior conductivity and catalytic properties, and it is an excellent candidate for bifacial DSSC in the application of BIPVs.
| S-EPMC7178793 | biostudies-literature
Project description:Development of cost-effective counter electrode (CE) materials is a key issue for practical applications of photoelectrochemical solar energy conversion. Kesterite Cu2ZnSnS4 (CZTS) has been recognized as a potential CE material, but its electrocatalytic activity is still insufficient for the recovery of I-/I3- electrolyte in dye-sensitized solar cells (DSSCs). Herein, we attempt to enhance the electrocatalytic activity of kesterite CZTS through element substitution of Zn2+ by Co2+ and Ni2+ cations, considering their high catalytic activity, as well as their similar atomic radius and electron configuration with Zn2+. The Cu2CoSnS4 (CCTS) and Cu2NiSnS4 (CNTS) CEs exhibit smaller charge-transfer resistance and reasonable power conversion efficiency (PCE) (CCTS, 8.3%; CNTS, 8.2%), comparable to that of Pt (8.3%). In contrast, the CZTS-based DSSCs only generate a PCE of 7.9%. Density functional theory calculation indicate that the enhanced catalytic performance is associated to the adsorption and desorption energy of iodine atom on the Co2+ and Ni2+. In addition, the stability of CCTS and CNTS CEs toward electrolyte is also significantly improved as evidenced by X-ray photoelectron spectroscopy and electrochemical impedance spectroscopy characterizations. These results thus suggest the effectiveness of the element substitution strategy for developing high-performance CE from the developed materials, particularly for multicomponent compounds.
| S-EPMC5992223 | biostudies-literature
Project description:Dye-sensitized solar cells with an energy storage function are demonstrated by modifying its counter electrode with a poly (vinylidene fluoride)/ZnO nanowire array composite. This simplex device could still function as an ordinary solar cell with a steady photocurrent output even after being fully charged. An energy storage density of 2.14 C g(-1) is achieved, while simultaneously a 3.70% photo-to-electric conversion efficiency is maintained.
| S-EPMC3796954 | biostudies-literature
Project description:The counter electrode has a great influence on the performance of the dye-sensitized solar cells (DSSCs). The research and development of Pt-free counter electrode is becoming one of the hot areas in the field of DSSCs. Herein, we successfully synthesized a ternary metal sulfide (CoNi2S4) nanostructure on FTO substrate by hydrothermal method and investigated its application as counter electrode. The as-synthesized sample could exhibit better electrocatalystic property than that of Pt, and corresponding DSSCs have comparable conversion efficiency with typical Pt catalyzed cells. The easy synthesis, low cost and excellent electrocatalytic property may help the CoNi2S4 nanostructure stand out as an alternative counter electrode in DSSCs.
| S-EPMC4370042 | biostudies-literature
Project description:Dye-sensitized solar cells (DSSCs) are often viewed as the potential future of photovoltaic systems and have garnered significant attention in solar energy research. In this groundbreaking research, we introduced a novel solvothermal method to fabricate a unique "grass-like" pattern on fluorine-doped tin oxide glass (FTO), specifically designed for use as a counter electrode in dye-sensitized solar cell (DSSC) assemblies. Through rigorous structural and morphological evaluations, we ascertained the successful deposition of nickel cobalt sulfide (NCS) on the FTO surface, exhibiting the desired grass-like morphology. Electrocatalytic performance assessment of the developed NCS-1 showed results that intriguingly rivaled those of the acclaimed platinum catalyst, especially during the conversion of I3 to I- as observed through cyclic voltammetry. Remarkably, when integrated into a solar cell assembly, both NCS-1 and NCS-2 electrodes exhibited encouraging power conversion efficiencies of 6.60% and 6.29%, respectively. These results become particularly noteworthy when compared to the 7.19% efficiency of a conventional Pt-based electrode under similar testing conditions. Central to the performance of the NCS-1 and NCS-2 electrodes is their unique thin and sharp grass-like morphology. This structure, vividly showcased through scanning electron microscopy, provides a vast surface area and an abundance of catalytic sites, pivotal for the catalytic reactions involving the electrolytes in DSSCs. In summation, given their innovative synthesis approach, affordability, and remarkable electrocatalytic attributes, the newly developed NCS counter electrodes stand out as potent contenders in future dye-sensitized solar cell applications.
| S-EPMC10650019 | biostudies-literature
Project description:Mangosteen peel is an inedible portion of a fruit. We are interested in using these residues as components of a dye sensitized solar cell (DSSC). Carbonized mangosteen peel was used with mangosteen peel dye as a natural counter electrode and a natural photosensitizer, respectively. A distinctive mesoporous honeycomb-like carbon structure with a rough nanoscale surface was found in carbonized mangosteen peels. The efficiency of a dye sensitized solar cell using carbonized mangosteen peel was compared to that of DSSCs with Pt and PEDOT-PSS counter electrodes. The highest solar conversion efficiency (2.63%) was obtained when using carbonized mangosteen peel and an organic disulfide/thiolate (T2/T(-)) electrolyte.
| S-EPMC4602286 | biostudies-literature
Project description:We report on a new counter electrode for dye-sensitized solar cells (DSCs), which is prepared using layer-by-layer assembly of negatively charged graphene oxide and positively charged poly (diallyldimethylammonium chloride) followed by an electrochemical reduction procedure. The DSC devises using the heteroleptic Ru complex C106TBA as sensitizer and this new counter electrode reach power conversion efficiencies of 9.5% and 7.6% in conjunction with low volatility and solvent free ionic liquid electrolytes, respectively. The new counter electrode exhibits good durability (60°C for 1000?h in a solar simulator, 100?mW cm(-2)) during the accelerated tests when used in combination with an ionic liquid electrolyte. This work identifies a new class of electro-catalysts with potential for low cost photovoltaic devices.
| S-EPMC3601371 | biostudies-literature
Project description:We describe the preparation and properties of bilayers of graphene- and multi-walled carbon nanotubes (MWCNTs) as an alternative to conventionally used platinum-based counter electrode for dye-sensitized solar cells (DSSC). The counter electrodes were prepared by a simple and easy-to-implement double self-assembly process. The preparation allows for controlling the surface roughness of electrode in a layer-by-layer deposition. Annealing under N2 atmosphere improves the electrode's conductivity and the catalytic activity of graphene and MWCNTs to reduce the I3 - species within the electrolyte of the DSSC. The performance of different counter-electrodes is compared for ZnO photoanode-based DSSCs. Bilayer electrodes show higher power conversion efficiencies than monolayer graphene electrodes or monolayer MWCNTs electrodes. The bilayer graphene (bottom)/MWCNTs (top) counter electrode-based DSSC exhibits a maximum power conversion efficiency of 4.1 % exceeding the efficiency of a reference DSSC with a thin film platinum counter electrode (efficiency of 3.4 %). In addition, the double self-assembled counter electrodes are mechanically stable, which enables their recycling for DSSCs fabrication without significant loss of the solar cell performance.
| S-EPMC6972496 | biostudies-literature
Project description:The present study reports the use of one-dimensional carbon wrapped VO2(M) nanofiber (VO2(M)/C) as a cost-effective counter electrode for dye-sensitized solar cells (DSSCs); where M denotes monoclinic crystal system. Uniform short length nanofiber was synthesised by a sol-gel based simple and versatile electrospinning and post carbonization technique. The investigation of nanostructure and morphological analysis were performed by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), and transmission electron microscope (TEM) with EDAX. The electrochemical response was comprehensively characterized by cyclic voltammetry, electrochemical impedance spectroscopy and Tafel polarization. The electrochemical analysis of the VO2(M)/C nanofiber counter electrode exhibits significant electrocatalytic activity towards the reduction of triiodide and low charge transfer resistance at the electrode-electrolyte interface. The DSSCs fabricated with carbon-wrapped VO2(M) nanofiber CE showed high power conversion efficiency of 6.53% under standard test condition of simulated 1SUN illumination at AM1.5 G, which was comparable to the 7.39% observed for conventional thermally decomposed Pt CE based DSSC under same test conditions. This result encourages the next step of modification and use of low-cost VO2(M) as an alternate counter electrode for DSSCs to achieve a substantial efficiency for future energy demand.
| S-EPMC6435790 | biostudies-literature
Project description:Flower-like phosphorus-doped nickel oxide (P-NiO) is proposed as a counter electrode (CE) for dye-sensitized solar cells (DSSCs). The flower-like nickel oxide essentially serves as the matrix for the CE, which is expected to promote a two-dimensional electron transport pathway. The phosphorus is intended to improve the catalytic ability by creating more active sites in the NiO for the catalysis of triiodide ions (I3-) to iodide ions (I-) on the surface of the CE. The P-NiO is controlled by a sequencing of precursor concentration, which allows the P-NiO to possess different features. The debris aggregation occurs in the P-NiO-1, while the P-NiO-0.75 leads to the incomplete flower-like nanosheets. The complete flower-like morphology can be observed in the P-NiO-0.5, P-NiO-0.25 and P-NiO-0.1 catalytic electrodes. The DSSC with the P-NiO-0.5 CE achieves a power conversion efficiency (η) of 9.05%, which is better than that of the DSSC using a Pt CE (η = 8.51%); it also performs better than that with the Pt CE, even under rear illumination and dim light conditions. The results indicate the promising potential of the P-NiO CE to replace the expensive Pt CE.
| S-EPMC9692408 | biostudies-literature