Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A Torsion-Based Rheometer for Measuring Viscoelastic Material Properties.

ABSTRACT: Rheology and the study of viscoelastic materials are an integral part of engineering and the study of biophysical systems. Tissue rheology is even used in the study of cancer and other diseases. However, the cost of a rheometer is feasible only for colleges, universities, and research laboratories. Even if a rheometer can be purchased, it is bulky and delicately calibrated, limiting its usefulness to the laboratory itself. The design presented here is less than a tenth of the cost of a professional rheometer. The design is also portable, making it the ideal solution to introduce viscoelasticity to high school students as well as for use in the field for obtaining rheological data.

SUBMITTER: Asp M

PROVIDER: S-EPMC10720878 | biostudies-literature | 2022 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

A Torsion-Based Rheometer for Measuring Viscoelastic Material Properties.

Asp Merrill M Jutzeler Elise E Kochanowski Jakub J Kerr Katherine K Song Dawei D Gupta Sarthak S Carroll Bobby B Patteson Alison A

Biophysicist (Rockville, Md.) 20221122 2

Rheology and the study of viscoelastic materials are an integral part of engineering and the study of biophysical systems. Tissue rheology is even used in the study of cancer and other diseases. However, the cost of a rheometer is feasible only for colleges, universities, and research laboratories. Even if a rheometer can be purchased, it is bulky and delicately calibrated, limiting its usefulness to the laboratory itself. The design presented here is less than a tenth of the cost of a professio ...[more]

PMID: 38098945

Similar Datasets

Measuring Cell Viscoelastic Properties Using a Microfluidic Extensional Flow Device.

Project description:The quantification of cellular mechanical properties is of tremendous interest in biology and medicine. Recent microfluidic technologies that infer cellular mechanical properties based on analysis of cellular deformations during microchannel traversal have dramatically improved throughput over traditional single-cell rheological tools, yet the extraction of material parameters from these measurements remains quite complex due to challenges such as confinement by channel walls and the domination of complex inertial forces. Here, we describe a simple microfluidic platform that uses hydrodynamic forces at low Reynolds number and low confinement to elongate single cells near the stagnation point of a planar extensional flow. In tandem, we present, to our knowledge, a novel analytical framework that enables determination of cellular viscoelastic properties (stiffness and fluidity) from these measurements. We validated our system and analysis by measuring the stiffness of cross-linked dextran microparticles, which yielded reasonable agreement with previously reported values and our micropipette aspiration measurements. We then measured viscoelastic properties of 3T3 fibroblasts and glioblastoma tumor initiating cells. Our system captures the expected changes in elastic modulus induced in 3T3 fibroblasts and tumor initiating cells in response to agents that soften (cytochalasin D) or stiffen (paraformaldehyde) the cytoskeleton. The simplicity of the device coupled with our analytical model allows straightforward measurement of the viscoelastic properties of cells and soft, spherical objects.

| S-EPMC5103028 | biostudies-literature

Estimating material viscoelastic properties based on surface wave measurements: a comparison of techniques and modeling assumptions.

Project description:Previous studies of the first author and others have focused on low audible frequency (<1 kHz) shear and surface wave motion in and on a viscoelastic material comprised of or representative of soft biological tissue. A specific case considered has been surface (Rayleigh) wave motion caused by a circular disk located on the surface and oscillating normal to it. Different approaches to identifying the type and coefficients of a viscoelastic model of the material based on these measurements have been proposed. One approach has been to optimize coefficients in an assumed viscoelastic model type to match measurements of the frequency-dependent Rayleigh wave speed. Another approach has been to optimize coefficients in an assumed viscoelastic model type to match the complex-valued frequency response function (FRF) between the excitation location and points at known radial distances from it. In the present article, the relative merits of these approaches are explored theoretically, computationally, and experimentally. It is concluded that matching the complex-valued FRF may provide a better estimate of the viscoelastic model type and parameter values; though, as the studies herein show, there are inherent limitations to identifying viscoelastic properties based on surface wave measurements.

| S-EPMC3257759 | biostudies-other

Elastic, Viscoelastic and Fibril-Reinforced Poroelastic Material Properties of Healthy and Osteoarthritic Human Tibial Cartilage.

Project description:Articular cartilage constituents (collagen, proteoglycans, fluid) are significantly altered during osteoarthritis (OA). A fibril-reinforced poroelastic (FRPE) material model can separate the contribution of each constituent on the mechanical response of cartilage. Yet, these properties and their OA related alterations are not known for human tibial cartilage. To answer this gap in the knowledge, we characterized the FRPE as well as elastic and viscoelastic properties of healthy and osteoarthritic human tibial cartilage. Tibial osteochondral explants (n = 27) harvested from 7 cadavers were mechanically tested in indentation followed by a quantification of elastic, viscoelastic and FRPE properties. Then they were histopathologically OARSI graded for the severity of OA. FRPE modeling revealed that non-fibrillar matrix modulus was higher in the healthy group compared to the early OA (p = 0.003) and advanced OA (p < 0.001) groups. The initial fibril network modulus was also higher in the healthy group compared to the early OA (p = 0.009) and advanced OA (p < 0.001) groups. The permeability correlated with the OARSI grade (p = 0.002, r = 0.56). For the first time, the FRPE properties were characterized for human tibial cartilage. This knowledge is crucial to improve the accuracy of computational knee joint models.

| S-EPMC8494710 | biostudies-literature

Membrane analogy for multi-material bars under torsion.

Project description:Prandtl's membrane analogy for the torsion problem of prismatic homogeneous bars is extended to multi-material cross sections. The linear elastic problem is governed by the same equations describing the deformation of an inflated membrane, differently tensioned in regions that correspond to the domains hosting different materials in the bar cross section, in a way proportional to the inverse of the material shear modulus. Multi-connected cross sections correspond to materials with vanishing stiffness inside the holes, implying infinite tension in the corresponding portions of the membrane. To define the interface constrains that allow to apply such a state of prestress to the membrane, a physical apparatus is proposed, which can be numerically modelled with a two-dimensional mesh implementable in commercial finite-element model codes. This approach presents noteworthy advantages with respect to the three-dimensional modelling of the twisted bar.

| S-EPMC6545046 | biostudies-literature

Measuring biological materials mechanics with atomic force microscopy - Determination of viscoelastic cell properties from stress relaxation experiments.

Project description:Cells are complex, viscoelastic bodies. Their mechanical properties are defined by the arrangement of semiflexible cytoskeletal fibers, their crosslinking, and the active remodeling of the cytoskeletal network. Atomic force microscopy (AFM) is an often-used technique for the study of cell mechanics, enabling time- and frequency-dependent measurements with nanometer resolution. Cells exhibit time-dependent deformation when stress is applied. In this work, we have investigated the stress relaxation of HeLa cells when subjected to a constant strain. We have varied the applied force (1, 2, 4, and 8 nN) and pause time (1, 10, and 60 s) to check for common assumptions for the use of models of linear viscoelasticity. Then, we have applied three models (standard linear solid, five element Maxwell, power law rheology) to study their suitability to fit the datasets. We show that the five element Maxwell model captures the stress relaxation response the best while still retaining a low number of free variables. This work serves as an introduction and guide when performing stress relaxation experiments on soft matter using AFM. RESEARCH HIGHLIGHTS: Cells exhibit linear viscoelastic properties when subjected to stress relaxation measurements at the studied different forces and times. The stress relaxation is best described by a five element Maxwell model. All three used models capture a softening and fluidization of cells when disrupting actin filaments.

| S-EPMC9796732 | biostudies-literature

Development of a Caramel-Based Viscoelastic Reference Material for Cutting Tests at Different Rates.

Project description:Cutting speed plays a crucial role for the behavior during and the final quality of viscoelastic foods after cutting and is, in industrial applications, usually adjusted on an empirical basis. Although previous studies investigated the interplay between the time-dependent properties and cutting behavior of model systems on an elastomer basis, there is still a need to elaborate such cause-effect relations for real foods. The aim of this study was to establish a reproducible manufacture of model caramels on a laboratory scale and to investigate the influence of the compositional parameters, moisture, and solid fat content, as well as cutting speed, on cutting behavior. It was possible to visualize ductile-brittle transitions in cutting force profiles, with an increase in cutting speed resulting in effects similar to that induced by a decreasing moisture content or an increasing solid fat content. Quantitatively, the progression of both maximum force and cutting energy reversed when cutting speed increased and composition changed in favor of a more brittle behavior. This work provides the basis for further research on distinct loading phenomena observed during the cutting of foods and for numerical modeling of the cutting process.

| S-EPMC8306751 | biostudies-literature

Low-Temperature-Meltable Elastomers Based on Linear Polydimethylsiloxane Chains Alpha, Omega-Terminated with Mesogenic Groups as Physical Crosslinker: A Passive Smart Material with Potential as Viscoelastic Coupling. Part II-Viscoelastic and Rheological Properties.

Project description:Rheological and viscoelastic properties of physically crosslinked low-temperature elastomers were studied. The supramolecularly assembling copolymers consist of linear polydimethylsiloxane (PDMS) elastic chains terminated on both ends with mesogenic building blocks (LC) of azobenzene type. They are generally and also structurally highly different from the well-studied LC polymer networks or LC elastomers: The LC units make up only a small volume fraction in our materials and act as fairly efficient physical crosslinkers with thermotropic properties. The aggregation (nano-phase separation) of the relatively rare, small and spatially separated terminal LC units generates temperature-switched viscoelasticity in the molten copolymers. Their rheological behavior was found to be controlled by an interplay of nano-phase separation of the LC units (growth and splitting of their aggregates) and of the thermotropic transitions in these aggregates (which change their stiffness). As a consequence, multiple gel points (up to three) are observed in temperature scans of the copolymers. The physical crosslinks also can be reversibly disconnected by large mechanical strain in the 'warm' rubbery state, as well as in melt (thixotropy). The kinetics of crosslink formation was found to be fast if induced by temperature and extremely fast in case of internal self-healing after strain damage. Thixotropic loop tests hence display only very small hysteresis in the LC-melt-state, although the melts show very distinct shear thinning. Our study evaluates structure-property relationships in three homologous systems with elastic PDMS segments of different length (8.6, 16.3 and 64.4 repeat units). The studied copolymers might be of interest as passive smart materials, especially as temperature-controlled elastic/viscoelastic mechanical coupling.

| S-EPMC7760245 | biostudies-literature

The diagnostic levels of evidence of instrumented devices for measuring viscoelastic joint properties and spasticity; a systematic review.

Project description:BackgroundMany diagnostic robotic devices have been developed to quantify viscoelastic properties and spasticity of patients with upper motor neuron lesions. However, in clinical practice, subjective and nonvalid clinical scales are still commonly used. To understand the limited use of diagnostic robotic devices assessing viscoelastic joint properties and spasticity in clinical practice, we evaluate the diagnostic level of evidence of studies on these devices.MethodA systematic literature review was performed using multiple databases. Two of the authors independently screened all articles. Studies investigating human subjects diagnosed with stroke or cerebral palsy, measured with a mechanical device to assess viscoelastic joint properties and/or spasticity of an extremity. All articles were assigned a diagnostic level of evidence, which was established with a classification strategy based on the number of participants and the design of the study, from a Level 0 (less than 10 subjects) to a Level IV, reporting the long-term clinical consequences in daily care.ResultsFifty-nine articles were included. Most studies measured the upper limb (64%) in stroke patients (81%). The highest level of evidence found was Level IIa (53%); these studies correlated the test values of the robotic device with a clinical test or within subgroups. Level 0 (30%) and Level I (17%; determining the range of values of the robotic test) were also common. None of the studies tested their device for diagnostic accuracy (Level III), clinical added value (Level IV).ConclusionThe diagnostic evidence needed for implementing robotic devices in clinical practice is lacking. Our findings indicate that more effort should be invested in studying diagnostic accuracy (Level III) or added value for clinical care (Level IV); only these studies can provide clinicians with evidence that robotic devices have added value above the currently-used clinical scales.

| S-EPMC8832664 | biostudies-literature

An Improved Experiment for Measuring Lithium Concentration-Dependent Material Properties of Graphite Composite Electrodes.

Project description:The in situ curvature measurement of bilayer beam electrodes is widely used to measure the lithium concentration-dependent material properties of lithium-ion battery electrodes, and further understand the mechano-electrochemical coupling behaviors during electrochemical cycling. The application of this method relies on the basic assumption that lithium is uniformly distributed along the length and thickness of the curved active composite layer. However, when the electrode undergoes large bending deformation, the distribution of lithium concentration in the electrolyte and active composite layer challenges the reliability of the experimental measurements. In this paper, an improved experiment for simultaneously measuring the partial molar volume and the elastic modulus of the graphite composite electrode is proposed. The distance between the two electrodes in the optical electrochemical cell is designed and graphite composite electrodes with four different thickness ratios are measured. The quantitative experimental data indicate that the improved experiment can better satisfy the basic assumptions. The partial molar volume and the elastic modulus of the graphite composite electrode evolve nonlinearly with the increase of lithium concentration, which are related to the phase transition of graphite and also affected by the other components in the composite active layer. This improved experiment is valuable for the reliable characterization of the Li concentration-dependent material properties in commercial electrodes, and developing next-generation lithium batteries with more stable structures and longer lifetimes.

| S-EPMC9783245 | biostudies-literature

A new method for obtaining model-free viscoelastic material properties from atomic force microscopy experiments using discrete integral transform techniques.

Project description:Viscoelastic characterization of materials at the micro- and the nanoscale is commonly performed with the aid of force-distance relationships acquired using atomic force microscopy (AFM). The general strategy for existing methods is to fit the observed material behavior to specific viscoelastic models, such as generalized viscoelastic models or power-law rheology models, among others. Here we propose a new method to invert and obtain the viscoelastic properties of a material through the use of the Z-transform, without using a model. We present the rheological viscoelastic relations in their classical derivation and their z-domain correspondence. We illustrate the proposed technique on a model experiment involving a traditional ramp-shaped force-distance AFM curve, demonstrating good agreement between the viscoelastic characteristics extracted from the simulated experiment and the theoretical expectations. We also provide a path for calculating standard viscoelastic responses from the extracted material characteristics. The new technique based on the Z-transform is complementary to previous model-based viscoelastic analyses and can be advantageous with respect to Fourier techniques due to its generality. Additionally, it can handle the unbounded inputs traditionally used to acquire force-distance relationships in AFM, such as ramp functions, in which the cantilever position is displaced linearly with time for a finite period of time.

| S-EPMC8474069 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data