Dataset Information

Synthesis of modified nanocomposite material and its use on removal of cesium from aqueous media.

ABSTRACT: A nanocomposite containing Fe₃O₄, chitosan (Ch), and hexacyanoferrate (HCF) was synthesized in the form of powder. The physicochemical properties of this nanocomposite are determined using different techniques including Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM). The existence of Cs (Cs) ions onto the surface of the nanocomposite was verified by dispersive X-ray spectroscopy (EDX). FTIR spectra confirmed that the nanocomposite was well coordinated. The batch technique was applied to evaluate the influences of initial pH value, temperature, contact time, shaking rate, initial Cs concentration, and competing cations on the efficiency of Cs removal. The maximum adsorption capacity for Cs ions of nanocomposite was determined as 34.36 mg/g at the initial pH = 5 of the aqueous solution. The equilibrium data fitted well the linearized Langmuir isotherm equation, which has the higher correlation coefficient (0.999). Thermodynamic parameters such as free energy (ΔG°), enthalpy (ΔH°), and entropy (ΔS°) indicated that the adsorption was exothermic and not spontaneous.

SUBMITTER: Cetin B

PROVIDER: S-EPMC10734734 | biostudies-literature | 2022

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Synthesis of modified nanocomposite material and its use on removal of cesium from aqueous media.

Çetin Bilal B Özcan Mustafa M Karakelle Bektaş B

Turkish journal of chemistry 20210824 1

A nanocomposite containing Fe<sub>3</sub>O<sub>4</sub>, chitosan (Ch), and hexacyanoferrate (HCF) was synthesized in the form of powder. The physicochemical properties of this nanocomposite are determined using different techniques including Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM). The existence of Cs (Cs) ions onto the surface of the nanocomposite was verified by dispersive X-ray spectroscopy ( ...[more]

PMID: 38143880

Similar Datasets

Project description:PurposePer- and polyfluoroalkyl substances (PFAS) have been found to be widespread, extremely persistent and bioaccumulative with toxicity tendencies. Pre-synthesized nanocomposite-activated carbons, referred to, as physically activated maize tassel silver (PAMTAg) and chemically activated maize tassel silver (CAMTAg) were utilized in the present study. They were used for the removal of 10 PFAS from aqueous solutions.MethodsThe nanocomposite-activated carbons were characterized via scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, Brunauer Emmett Teller (BET) and other techniques. Batch equilibrium experiments were conducted in order to investigate the effects of solution pH, adsorbent dosage, initial PFAS concentration and temperature on the removal of PFAS using PAMTAg and CAMTAg. Langmuir and Freundlich adsorption isotherm models were used to analyse the equilibrium data obtained.ResultsMaximum adsorption capacities of 454.1 mg/g (0.91 mmol/g) and 321.2 mg/g (0.78 mmol/g) were recorded for perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA), respectively using CAMTAg. The values recorded for the Gibbs' free energy (ΔG°) for the adsorption of PFOS and PFOA onto PAMTAg and CAMTAg were negative; PFOS (-9.61, -9.99 and - 10.39), PFOA (-8.77, -9.76 and - 10.21) using PAMTAg; and PFOS (-13.70, -12.70 and - 12.37), PFOA (-12.86, -12.21 and - 11.17) using CAMTAg. Therefore, the adsorption processes were spontaneous and feasible. The values recorded for enthalpy (ΔH°) (kJ/mol) for the adsorption of PFOS (-26.15) and PFOA (-35.86) onto CAMTAg were negative, indicating that the adsorption mechanism is exothermic in nature. Positive values were recorded for ΔH° for the adsorption of PFOS (2.32) and PFOA (12.69) onto PAMTAg, indicative of an endothermic adsorption mechanism. Positive entropy (ΔS°) values (0.04 and 0.07) were recorded for PFOS and PFOA using PAMTAg; whereas negative values (-0.04 and - 0.08) were recorded for ΔS° using CAMTAg. A positive ΔS° indicates an increase in randomness of the adsorbate at the solid-solution interface and the reverse is the case for a negative ΔS°.ConclusionThe interplay of electrostatic attraction and hydrophobic interactions enabled the removal of PFAS using PAMTAg and CAMTAg. Findings suggest that PAMTAg and CAMTAg are effective for the removal of PFAS from aqueous media and are good alternatives to commercially available activated carbons.Graphical abstractSupplementary informationThe online version contains supplementary material available at 10.1007/s40201-020-00597-3.

Project description:Water pollution, driven by the discharge of dyes from industrial processes, poses a significant environmental and health hazard worldwide. Methylene blue, a common dye, constitutes particular concern due to its persistence and toxicity. Conventional wastewater treatment methods often struggle to effectively remove such contaminants. In this study, we introduce a novel approach utilizing a polysulfone-based composite membrane incorporating pretreated jute fibers and copper nanoparticles for the removal of methylene blue from aqueous solutions. The pretreated jute fibers undergo alkali and hydrogen peroxide treatments to enhance their adsorption capabilities, while copper nanoparticles are incorporated into the membrane to bolster its antimicrobial properties. Through comprehensive characterization techniques, including Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), dynamic light scattering (DLS), and scanning electron microscopy (SEM), we confirm the structural and chemical properties of the composite membranes. Batch adsorption studies reveal the superior performance of the composite membrane compared with individual components. Specifically, at lower methylene blue concentrations (∼20 ppm), the composite membrane demonstrates a remarkable percent removal value of about 97%, while at higher concentrations (∼100 ppm), the percent removal remains substantial at 85%. Additionally, desorption studies elucidate the retention capacity of the adsorbed dye, indicating the feasibility of the composite membrane for practical applications in wastewater treatment. These findings underscore the potential of nanocomposite-fiber membranes as sustainable and cost-effective solutions for mitigating water pollution. By harnessing advancements in nanotechnology and materials science, the presented innovative composite membranes could offer promising avenues for addressing water pollution challenges and promoting environmental sustainability.

Dataset Information

Synthesis of modified nanocomposite material and its use on removal of cesium from aqueous media.

Publications

Synthesis of modified nanocomposite material and its use on removal of cesium from aqueous media.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets