Arterial and venous peripheral vascular assessment using wearable electro-resistive morphic sensors.
Ontology highlight
ABSTRACT:
SUBMITTER: Varaki ES
PROVIDER: S-EPMC10789795 | biostudies-literature | 2024 Jan
REPOSITORIES: biostudies-literature
Publications
Arterial and venous peripheral vascular assessment using wearable electro-resistive morphic sensors.
Varaki Elham Shabani ES Gargiulo Gaetano D GD Malone Matthew M Breen Paul P PP
Scientific reports 20240115 1
Peripheral vascular diseases (PVDs) represent a significant burden on global human health and healthcare systems. With continued growth in obesity and diabetes, it is likely that the incidence of these conditions will increase. As many PVDs remain undiagnosed, low-cost and easy to use diagnostic methods are required. This work uses newly developed wearable electro-resistive morphic sensors to assess venous and arterial competence in the lower limbs of 36 healthy subjects. Comparison of this HeMo ...[more]
Similar Datasets
Project description:BackgroundFatigue is a broad, multifactorial concept encompassing feelings of reduced physical and mental energy levels. Fatigue strongly impacts patient health-related quality of life across a huge range of conditions, yet, to date, tools available to understand fatigue are severely limited.MethodsAfter using a recurrent neural network-based algorithm to impute missing time series data form a multisensor wearable device, we compared supervised and unsupervised machine learning approaches to gain insights on the relationship between self-reported non-pathological fatigue and multimodal sensor data.ResultsA total of 27 healthy subjects and 405 recording days were analyzed. Recorded data included continuous multimodal wearable sensor time series on physical activity, vital signs, and other physiological parameters, and daily questionnaires on fatigue. The best results were obtained when using the causal convolutional neural network model for unsupervised representation learning of multivariate sensor data, and random forest as a classifier trained on subject-reported physical fatigue labels (weighted precision of 0.70 ± 0.03 and recall of 0.73 ± 0.03). When using manually engineered features on sensor data to train our random forest (weighted precision of 0.70 ± 0.05 and recall of 0.72 ± 0.01), both physical activity (energy expenditure, activity counts, and steps) and vital signs (heart rate, heart rate variability, and respiratory rate) were important parameters to measure. Furthermore, vital signs contributed the most as top features for predicting mental fatigue compared to physical ones. These results support the idea that fatigue is a highly multimodal concept. Analysis of clusters from sensor data highlighted a digital phenotype indicating the presence of fatigue (95% of observations) characterized by a high intensity of physical activity. Mental fatigue followed similar trends but was less predictable. Potential future directions could focus on anomaly detection assuming longer individual monitoring periods.ConclusionTaken together, these results are the first demonstration that multimodal digital data can be used to inform, quantify, and augment subjectively captured non-pathological fatigue measures.
| S-EPMC7768149 | biostudies-literature
Project description:Introduction The aim of this study was to investigate the prevalence of arterial and venous complications in patients requiring peripheral venoarterial extracorporeal membrane oxygenation (VA ECMO) and its risk factors at the time of cannulation and during extracorporeal membrane oxygenation (ECMO) support and to assess vascular complications in association with decannulation. Material and methods Between January 2010 to January 2020, out of 1,030 eligible patients requiring VA-ECMO, 427 with analyzable vascular screening were included. Duplex sonography and/or CT scan after decannulation were used to screen for thrombosis and pulmonary embolism as well as arterial complications. Near-infrared spectrometry (NIRS) was established at the time of cannulation and was continuously monitored during the ECMO therapy. Results The prevalence of venous complications was 27%. Thrombosis and pulmonary embolism were observed in 21 and 7% of patients, respectively. Pulmonary embolism was more frequently diagnosed in patients with thrombosis (22 vs. 3%, p < 0.001). In multivariate analysis, cannulation in the jugular vein was determined as a risk factor for venous thrombosis in contrast to the extent of anticoagulation. The prevalence of arterial complications was 37%, mainly ischemia followed by bleeding, dissection, and compartment syndrome. Vascular surgery was necessary for 19% of the patients, of whome 1% required major amputations. A distal perfusion cannula (DPC) was implanted at cannulation in 24% of patients and secondarily in 16% of patients after cannulation as required during ECMO support. In the multivariate analysis, risk factors for leg ischemia at the time of cannulation were elevated D-dimers, lower NIRS on the cannulated leg, and lack of a DPC. The best discriminative parameter was the difference in NIRS between the non-cannulated leg and the cannulated leg. In contrast, during ECMO support, only the lack of a DPC was associated with leg ischemia. A similar rate of complications associated with decannulation, mainly arterial thrombosis, ischemia, or bleeding, was seen with percutaneous and surgical approaches (18 vs. 17%, p = 0.295). Conclusion Patients requiring VA ECMO should be routinely screened for vascular complications. The decision to insert a DPC should be evaluated individually. However, NIRS monitoring of the cannulated leg and the non-cannulated leg is essential to identify the legs at risk for critical ischemia. As complications associated with decannulation were equally distributed between percutaneous and surgical approaches, the applied method may be chosen according to local experience.
| S-EPMC9365977 | biostudies-literature
Project description:Falls are among the most frequent and costly population health issues, costing $50bn each year in the US. In current clinical practice, falls (and associated fall risk) are often self-reported after the "first fall", delaying primary prevention of falls and development of targeted fall prevention interventions. Current methods for assessing falls risk can be subjective, inaccurate, have low inter-rater reliability, and do not address factors contributing to falls (poor balance, gait speed, transfers, turning). 8521 participants (72.7 ± 12.0 years, 5392 female) from six countries were assessed using a digital falls risk assessment protocol. Data consisted of wearable sensor data captured during the Timed Up and Go (TUG) test along with self-reported questionnaire data on falls risk factors, applied to previously trained and validated classifier models. We found that 25.8% of patients reported a fall in the previous 12 months, of the 74.6% of participants that had not reported a fall, 21.5% were found to have a high predicted risk of falls. Overall 26.2% of patients were predicted to be at high risk of falls. 29.8% of participants were found to have slow walking speed, while 19.8% had high gait variability and 17.5% had problems with transfers. We report an observational study of results obtained from a novel digital fall risk assessment protocol. This protocol is intended to support the early identification of older adults at risk of falls and inform the creation of appropriate personalized interventions to prevent falls. A population-based approach to management of falls using objective measures of falls risk and mobility impairment, may help reduce unnecessary outpatient and emergency department utilization by improving risk prediction and stratification, driving more patients towards clinical and community-based falls prevention activities.
| S-EPMC6906412 | biostudies-literature
Project description:Background: Studies aiming to objectively quantify movement disorders during upper limb tasks using wearable sensors have recently increased, but there is a wide variety in described measurement and analyzing methods, hampering standardization of methods in research and clinics. Therefore, the primary objective of this review was to provide an overview of sensor set-up and type, included tasks, sensor features and methods used to quantify movement disorders during upper limb tasks in multiple pathological populations. The secondary objective was to identify the most sensitive sensor features for the detection and quantification of movement disorders on the one hand and to describe the clinical application of the proposed methods on the other hand. Methods: A literature search using Scopus, Web of Science, and PubMed was performed. Articles needed to meet following criteria: 1) participants were adults/children with a neurological disease, 2) (at least) one sensor was placed on the upper limb for evaluation of movement disorders during upper limb tasks, 3) comparisons between: groups with/without movement disorders, sensor features before/after intervention, or sensor features with a clinical scale for assessment of the movement disorder. 4) Outcome measures included sensor features from acceleration/angular velocity signals. Results: A total of 101 articles were included, of which 56 researched Parkinson's Disease. Wrist(s), hand(s) and index finger(s) were the most popular sensor locations. Most frequent tasks were: finger tapping, wrist pro/supination, keeping the arms extended in front of the body and finger-to-nose. Most frequently calculated sensor features were mean, standard deviation, root-mean-square, ranges, skewness, kurtosis/entropy of acceleration and/or angular velocity, in combination with dominant frequencies/power of acceleration signals. Examples of clinical applications were automatization of a clinical scale or discrimination between a patient/control group or different patient groups. Conclusion: Current overview can support clinicians and researchers in selecting the most sensitive pathology-dependent sensor features and methodologies for detection and quantification of upper limb movement disorders and objective evaluations of treatment effects. Insights from Parkinson's Disease studies can accelerate the development of wearable sensors protocols in the remaining pathologies, provided that there is sufficient attention for the standardisation of protocols, tasks, feasibility and data analysis methods.
| S-EPMC9879015 | biostudies-literature
Project description:BackgroundArterial stiffness is an independent predictor of outcomes for patients with cardiovascular disease. Although measurement of pulse wave velocity is a widely accepted, noninvasive approach for the assessment of arterial stiffness, its accuracy is affected by changes in blood pressure.SummaryThe cardio-ankle vascular index (CAVI) is an index of the overall stiffness of the artery from the origin of the aorta to the ankle and is theoretically independent of blood pressure at the time of measurement. CAVI increases linearly with age and is elevated even in mild arteriosclerotic disease. It can identify differences in the degree of arteriosclerosis among patients with severe arteriosclerotic disease and better reflects the severity of disease of the coronary artery than does brachial-ankle pulse wave velocity. Patients with higher CAVI values show a poor prognosis compared with those with lower CAVI values. Furthermore, CAVI can be lowered by controlling diabetes mellitus and hypertension.Key messagesThe primary aims of assessing arterial stiffness using CAVI are to assist in the early detection of arteriosclerosis, allowing timely treatment and lifestyle modification, and to quantitatively evaluate the progression of disease and the effectiveness of treatment. Whether CAVI-guided therapy can improve prognosis in high-risk patients needs to be further examined to confirm the clinical usefulness of this measure.
| S-EPMC4949370 | biostudies-literature
Project description:Surgery is a common first-line treatment for many types of disease, including cancer. Mortality rates after general elective surgery have seen significant decreases whilst postoperative complications remain a frequent occurrence. Preoperative assessment tools are used to support patient risk stratification but do not always provide a precise and accessible assessment. Wearable sensors (WS) provide an accessible alternative that offers continuous monitoring in a non-clinical setting. They have shown consistent uptake across the perioperative period but there has been no review of WS as a preoperative assessment tool. This paper reviews the developments in WS research that have application to the preoperative period. Accelerometers were consistently employed as sensors in research and were frequently combined with photoplethysmography or electrocardiography sensors. Pre-processing methods were discussed and missing data was a common theme; this was dealt with in several ways, commonly by employing an extraction threshold or using imputation techniques. Research rarely processed raw data; commercial devices that employ internal proprietary algorithms with pre-calculated heart rate and step count were most commonly employed limiting further feature extraction. A range of machine learning models were used to predict outcomes including support vector machines, random forests and regression models. No individual model clearly outperformed others. Deep learning proved successful for predicting exercise testing outcomes but only within large sample-size studies. This review outlines the challenges of WS and provides recommendations for future research to develop WS as a viable preoperative assessment tool.
| S-EPMC10820534 | biostudies-literature
Project description:Ionic thermoelectric supercapacitors (ITESCs) are noted for their high ionic Seebeck coefficient (α) to convert thermal energy into electrical current through charging. This work demonstrates the utilization of the charging and discharging current from ITESCs to directly operate resistive sensors. The humidity monitoring is powered by applying a periodic temperature gradient to a connected ITESC. By leveraging these properties and residual environmental heat, ITESCs can offer a promising method for autonomously powered portable sensors.
| S-EPMC11809375 | biostudies-literature
Project description:Polysomnography (PSG) is the current gold standard in high-resolution sleep monitoring; however, this method is obtrusive, expensive, and time-consuming. Conversely, commercially available wrist monitors such as ActiWatch can monitor sleep for multiple days and at low cost, but often overestimate sleep and cannot differentiate between sleep stages, such as rapid eye movement (REM) and non-REM. Wireless wearable sensors are a promising alternative for their portability and access to high-resolution data for customizable analytics. We present a multimodal sensor system measuring hand acceleration, electrocardiography, and distal skin temperature that outperforms the ActiWatch, detecting wake and sleep with a recall of 74.4% and 90.0%, respectively, as well as wake, non-REM, and REM with recall of 73.3%, 59.0%, and 56.0%, respectively. This approach will enable clinicians and researchers to more easily, accurately, and inexpensively assess long-term sleep patterns, diagnose sleep disorders, and monitor risk factors for disease in both laboratory and home settings.
| S-EPMC6925191 | biostudies-literature
Project description:Wearable devices have attracted great attentions as next-generation electronic devices. For the comfortable, portable, and easy-to-use system platform in wearable electronics, a key requirement is to replace conventional bulky and rigid energy devices into thin and deformable ones accompanying the capability of long-term energy supply. Here, we demonstrate a wearable fall detection system composed of a wristband-type deformable triboelectric generator and lithium ion battery in conjunction with integrated sensors, controllers, and wireless units. A stretchable conductive nylon is used as electrodes of the triboelectric generator and the interconnection between battery cells. Ethoxylated polyethylenimine, coated on the surface of the conductive nylon electrode, tunes the work function of a triboelectric generator and maximizes its performance. The electrical energy harvested from the triboelectric generator through human body motions continuously recharges the stretchable battery and prolongs hours of its use. The integrated energy supply system runs the 3-axis accelerometer and related electronics that record human body motions and send the data wirelessly. Upon the unexpected fall occurring, a custom-made software discriminates the fall signal and an emergency alert is immediately sent to an external mobile device. This wearable fall detection system would provide new opportunities in the mobile electronics and wearable healthcare.
| S-EPMC4657018 | biostudies-literature
Project description:ObjectiveInpatient rehabilitation represents a critical setting for stroke treatment, providing intensive, targeted therapy and task-specific practice to minimize a patient's functional deficits and facilitate their reintegration into the community. However, impairment and recovery vary greatly after stroke, making it difficult to predict a patient's future outcomes or response to treatment. In this study, the authors examined the value of early-stage wearable sensor data to predict 3 functional outcomes (ambulation, independence, and risk of falling) at rehabilitation discharge.MethodsFifty-five individuals undergoing inpatient stroke rehabilitation participated in this study. Supervised machine learning classifiers were retrospectively trained to predict discharge outcomes using data collected at hospital admission, including patient information, functional assessment scores, and inertial sensor data from the lower limbs during gait and/or balance tasks. Model performance was compared across different data combinations and was benchmarked against a traditional model trained without sensor data.ResultsFor patients who were ambulatory at admission, sensor data improved the predictions of ambulation and risk of falling (with weighted F1 scores increasing by 19.6% and 23.4%, respectively) and maintained similar performance for predictions of independence, compared to a benchmark model without sensor data. The best-performing sensor-based models predicted discharge ambulation (community vs household), independence (high vs low), and risk of falling (normal vs high) with accuracies of 84.4%, 68.8%, and 65.9%, respectively. Most misclassifications occurred with admission or discharge scores near the classification boundary. For patients who were nonambulatory at admission, sensor data recorded during simple balance tasks did not offer predictive value over the benchmark models.ConclusionThese findings support the continued investigation of wearable sensors as an accessible, easy-to-use tool to predict the functional recovery after stroke.ImpactAccurate, early prediction of poststroke rehabilitation outcomes from wearable sensors would improve our ability to deliver personalized, effective care and discharge planning in the inpatient setting and beyond.
| S-EPMC10851859 | biostudies-literature