Correction to “Ligand Chromophore Modification Approach for Predictive Incremental Tuning of Metal–Organic Framework Color”
Ontology highlight
ABSTRACT:
SUBMITTER:
PROVIDER: S-EPMC10870409 | biostudies-literature | 2024 Jan
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:In this study, we report the luminescence color tuning in the lanthanide metal-organic framework (LnMOF) ([La(bpdc)Cl(DMF)] (1); bpdc2- = [1,1'-biphenyl]-4,4'-dicarboxylate, DMF = N,N-dimethylformamide) by introducing dual emission properties in a La3+ MOF scaffold through doping with the blue fluorescent 2,2'-diamino-[1,1'-biphenyl]-4,4'-dicarboxylate (dabpdc2-) and the red emissive Eu3+. With a careful adjustment of the relative doping levels of the lanthanide ions and bridging ligands, the color of the luminescence was modulated, while at the same time the photophysical characteristics of the two chromophores were retained. In addition, the photophysical properties of the parent MOF (1) and its doped counterparts with various dabpdc2-/bpdc2- and Eu3+/La3+ ratios and the photoinduced energy transfer pathways that are possible within these materials are discussed. Finally, the temperature dependence study on the emission profile of a doped analogue containing 10% dabpdc2- and 2.5% Eu3+ (7) is presented, highlighting the potential of this family of materials to behave as temperature sensors.
| S-EPMC7037827 | biostudies-literature
Project description:Linker functionalization is a common route used to affect the electronic and catalytic properties of metal-organic frameworks. By either pre- or post-synthetically installing linkages with differing linker moieties the band gap, workfunction, and exciton lifetimes have been shown to be affected. One overlooked aspect of linker functionalization, however, has been the impact on the metal d-orbital energies to which they are bound. The ligand field differences should result in substantial changes in d-splitting. In this study we use density functional theory (DFT) to study the energetics of d-orbital energy tuning as a function of linker chemistry. We offer a general descriptor, linker pKa, as a tool to predict resultant band energies in metal-organic frameworks (MOFs). Our calculations reveal that simple functionalizations can affect the band energies, of primarily metal d lineage, by up to 2 eV and illustrate the significance of this band modularity using four archetypal MOFs: UiO-66, MIL-125, ZIF-8, and MOF-5. Together, we show that linker functionalization dramatically affects d-energies in MOF clusters and highlight that linker functionalization is a useful route for fine-tuning band edges centered on the metals, rather than linkers themselves.
| S-EPMC10097619 | biostudies-literature
Project description:The neutral or A state of the green fluorescent protein (GFP) chromophore is a remarkable example of a photoacid naturally embedded in the protein environment and accounts for the large Stokes shift of GFP in response to near UV excitation. Its color tuning mechanism has been largely overlooked, as it is less preferred for imaging applications than the redder anionic or B state. Past studies, based on site-directed mutagenesis or solvatochromism of the isolated chromophore, have concluded that its color tuning range is much narrower than its anionic counterpart. However, as we performed extensive investigation on more GFP mutants, we found that the color of the neutral chromophore can be more sensitive to protein electrostatics than can the anionic counterpart. Electronic Stark spectroscopy reveals a fundamentally different electrostatic color tuning mechanism for the neutral state of the chromophore that demands a three-form model as compared to that of the anionic state, which requires only two forms ( J. Am. Chem. Soc. 2019, 141, 15250-15265). Specifically, an underlying zwitterionic charge-transfer state is required to explain its sensitivity to electrostatics. As the Stokes shift is tightly linked to excited-state proton transfer (ESPT) of the protonated chromophore, we infer design principles of the GFP chromophore as a photoacid through the color tuning mechanisms of both protonation states. The three-form model could also be applied to similar biological and nonbiological dyes and complements the failure of the two-form model for donor-acceptor systems with localized ground-state electronic distributions.
| S-EPMC7485587 | biostudies-literature
Project description:We report on the epitaxial growth of periodic para-hexaphenyl (p-6P)/α-sexi-thiophene (6T) multilayer heterostructures on top of p-6P nanotemplates. By the chosen approach, 6T molecules are forced to align parallel to the p-6P template molecules, which yields highly polarized photoluminescence (PL)-emission of both species. The PL spectra show that the fabricated multilayer structures provide optical emission from two different 6T phases, interfacial 6T molecules, and 3-dimensional crystallites. By a periodical deposition of 6T monolayers and p-6P spacers it is demonstrated that the strongly polarized spectral contribution of interfacial 6T can be precisely controlled and amplified. By analyzing the PL emission of both 6T phases as a function of p-6P spacer thickness (Δd(p-6P)) we have determined a critical value of Δd(p-6P )≈ 2.73 nm where interfacial 6T runs into saturation and the surplus of 6T starts to cluster in 3-dimensional crystallites. These results are further substantiated by UPS and XRD measurements. Moreover, it is demonstrated by morphological investigations, provided by scanning force microscopy and fluorescence microscopy, that periodical deposition of 6T and p-6P leads to a significant improvement of homogeneity in PL-emission and morphology of nanofibers. Photoluminescence excitation experiments in combination with time-resolved photoluminescence demonstrate that the spectral emission of the organic multilayer nanofibers is dominated by a resonant energy transfer from p-6P host- to 6T guest-molecules. The sensitization time of the 6T emission in the 6T/p-6P multilayer structures depends on the p-6P spacer thickness, and can be explained by well separated layers of host-guest molecules obtained by organic-organic heteroepitaxy. The spectral emission and consequently the fluorescent color of the nanofibers can be efficiently tuned from the blue via white to the yellow-green spectral range.
| S-EPMC3395255 | biostudies-literature
Project description:Fluorescence significantly improves the performance of gels. Various strategies, such as embedment and crosslinking, have been used to integrate extrinsic luminophores into gel systems, but the procedures are usually complex. Herein, for the first time, we report gels with intrinsic and tunable emission color prepared with 5-boronoisophthalic acid (5-bop) and Eu3+, Tb3+, and/or Dy3+ similar to the procedure for the preparation of metal-organic frameworks (MOFs). The single-metal gels exhibit intrinsic trichromatic fluorescence, due to which full-color emissions are readily obtained by tuning the type and/or ratio of Ln3+ ions to prepare mixed-metal gels. The emission is governed by an antenna effect and is thus excited with single-wavelength at 275 nm. The nucleation-growth mechanism reveals that the Ln3+ ions and 5-bop produce separated layers, which then grow anisotropically to form nanoribbons by high coordinated valence of Ln3+ ions and biased carboxyl distribution as well as steric hindrance and hydrogen bonds of the boric acid group in 5-bop. The nanoribbons entangle together to generate chemical-physical hybrid gels. To the best of our knowledge, this is the first example of gels with inherent and tunable emission color. Due to their optical and viscoelastic properties, the gels have numerous potential applications such as tunable emission and multi-target detection.
| S-EPMC6369438 | biostudies-literature
Project description:Melt-quenched metal-organic framework (MOF) glasses have gained significant interest as the first new category of glass reported in 50 years. In this work, an amine-functionalized zeolitic imidazolate framework (ZIF), denoted ZIF-UC-6, was prepared and demonstrated to undergo both melting and glass formation. The presence of an amine group resulted in a lower melting temperature compared to other ZIFs, while also allowing material properties to be tuned by post-synthetic modification (PSM). As a prototypical example, the ZIF glass surface was functionalized with octyl isocyanate, changing its behavior from hydrophilic to hydrophobic. PSM therefore provides a promising strategy for tuning the surface properties of MOF glasses.
| S-EPMC9100367 | biostudies-literature
Project description:We investigate here a systematic way to tune two-photon transition strengths (δ2PA) and two-photon absorption (2PA) cross sections (σ2PA) of the rhodopsin's chromophore 11-cis-retinal protonated Schiff base (RPSB) via the modulation of the methyl groups pattern along its polyene chain. Our team employed the resolution of identity, coupled cluster approximate second order (RI-CC2) method with Dunning's aug-cc-pVDZ basis set, to determine the structural impact on δ2PA, as well as its correlation to both transition dipole moments and permanent electric dipole moments. Seven structures were probed in vacuo, including five-double-bond-conjugated model of the native chromophore, shortened by the β-ionone ring (RPSB5), and its de/methylated analogues: 9-methyl, 13-methyl, planar and twisted models of 9,10-dimethyl and 9,10,13-trimethyl. Our results demonstrate that the magnitude of δ2PA is dictated by both the position and number of methylated groups attached to its polyene chain as well as the degree of dihedral twist that is introduced due to the de/methylation. In fact, a strong correlation between δ2PA enhancement and the presence of a C13-methyl group in the planar RPSB5 species is found. Trends in δ2PA values follow the trends observed in their corresponding changes in the permanent dipole moment upon the S0-S1 excitation nearly exactly. The assessment of four DFT functionals, i.e., M11, MN15, CAM-B3LYP, and BHandHLYP, previously found most successful in predicting 2PA properties in biological chromophores, points to a long-range-corrected hybrid meta-GGA M11 as the top-performing functional, albeit still delivering underestimated δ2PA and σ2PA values by a factor of 3.3-5.3 with respect to the CC2 results. In the case of global-hybrid meta-NGA (MN15), as well as CAM-B3LYP and BHandHLYP functionals, this factor deteriorates significantly to 6.7-20.9 and is mostly related to significantly lower quality of the ground- and excited-state dipole moments.
| S-EPMC11428129 | biostudies-literature
Project description:We present a nanoscale color detector based on a single-walled carbon nanotube functionalized with azobenzene chromophores, where the chromophores serve as photoabsorbers and the nanotube as the electronic read-out. By synthesizing chromophores with specific absorption windows in the visible spectrum and anchoring them to the nanotube surface, we demonstrate the controlled detection of visible light of low intensity in narrow ranges of wavelengths. Our measurements suggest that upon photoabsorption, the chromophores isomerize from the ground state trans configuration to the excited state cis configuration, accompanied by a large change in dipole moment, changing the electrostatic environment of the nanotube. All-electron ab initio calculations are used to study the chromophore-nanotube hybrids and show that the chromophores bind strongly to the nanotubes without disturbing the electronic structure of either species. Calculated values of the dipole moments support the notion of dipole changes as the optical detection mechanism.
| S-EPMC3258674 | biostudies-literature
Project description:A major challenge for the development of organic water oxidation catalysts is their low chemical stability and low catalytic efficiency. Herein, we first demonstrate that both the chemical stability and catalytic efficiency of an organic ligand for water oxidation can be improved by incorporating it into the framework of a stable MOF. This opens up a promising avenue for the development of stable and efficient organic water oxidation catalysts.
| S-EPMC5590092 | biostudies-literature
Project description:Stable cathodes with multiple redox-active centres affording a high energy density, fast redox kinetics and a long life are continuous pursuits for aqueous zinc-organic batteries. Here, we achieve a high-performance zinc-organic battery by tuning the electron delocalization within a designed fully conjugated two-dimensional hydrogen-bonded organic framework as a cathode material. Notably, the intermolecular hydrogen bonds endow this framework with a transverse two-dimensional extended stacking network and structural stability, whereas the multiple C = O and C = N electroactive centres cooperatively trigger multielectron redox chemistry with super delocalization, thereby sharply boosting the redox potential, intrinsic electronic conductivity and redox kinetics. Further mechanistic investigations reveal that the fully conjugated molecular configuration enables reversible Zn2+/H+ synergistic storage accompanied by 10-electron transfer. Benefitting from the above synergistic effects, the elaborately tailored organic cathode delivers a reversible capacity of 498.6 mAh g-1 at 0.2 A g-1, good cyclability and a high energy density (355 Wh kg-1).
| S-EPMC10462634 | biostudies-literature