Project description:Photonic lattices of mutually interacting indistinguishable cavities represent a cornerstone of collective phenomena in optics and could become important in advanced sensing or communication devices. The disorder induced by fabrication technologies has so far hindered the development of such resonant cavity architectures, while post-fabrication tuning methods have been limited by complexity and poor scalability. Here we present a new simple and scalable tuning method for ensembles of microphotonic and nanophotonic resonators, which enables their permanent collective spectral alignment. The method introduces an approach of cavity-enhanced photoelectrochemical etching in a fluid, a resonant process triggered by sub-bandgap light that allows for high selectivity and precision. The technique is presented on a gallium arsenide nanophotonic platform and illustrated by finely tuning one, two and up to five resonators. It opens the way to applications requiring large networks of identical resonators and their spectral referencing to external etalons.
Project description:Circular Bragg gratings compose a very appealing photonic platform and nanophotonic interface for the controlled light-matter coupling of emitters in nanomaterials. Here, we discuss the integration of exfoliated monolayers of WSe2 with GaInP Bragg gratings. We apply hyperspectral imaging to our coupled system, and explore the spatio-spectral characteristics of our coupled monolayer-cavity system. Our work represents a valuable step towards the integration of atomically thin quantum emitters in semiconductor nanophotonic cavities.
Project description:Cavity-enhanced emission of electrically controlled semiconductor quantum dots (QDs) is essential in the development of bright quantum devices for real-world quantum photonic applications. Combining the circular Bragg grating (CBG) approach with a PIN-diode structure, we propose and implement designs for ridge-based electrically contacted QD-CBG resonators. Through fine-tuning of device parameters in numerical simulations and deterministic nanoprocessing, we produced electrically controlled single QD-CBG resonators with excellent electro-optical emission properties. These include multiple wavelength-tunable emission lines and a photon extraction efficiency (PEE) of up to 30.4(3.4)%, where refined numerical optimization based on experimental findings suggests a substantial improvement, promising PEE > 50%. Additionally, the developed quantum light sources yield single-photon purity reaching 99.2(2)% and photon indistinguishability of 75(5)% under quasi-resonant p-shell excitation. Our results present high-performance quantum devices with combined cavity enhancement and deterministic charge-environment controls, which are relevant for the development of photonic quantum information systems such as complex quantum repeater networks.
Project description:The emitter-cavity strong coupling manifests crucial significance for exploiting quantum technology, especially in the scale of individual emitters. However, due to the small light-matter interaction cross-section, the single emitter-cavity strong coupling has been limited by its harsh requirement on the quality factor of the cavity and the local density of optical states. Herein, we present a strategy termed waveguide-assisted energy quantum transfer (WEQT) to improve the single emitter-cavity coupling strength by extending the interaction cross-section. Multiple ancillary emitters are optically linked by a waveguide, providing an indirect coupling channel to transfer the energy quantum between target emitter and cavity. An enhancement factor of coupling strength g̃/g>10 can be easily achieved, which dramatically release the rigorous design of cavity. As an extension of concept, we further show that the ancillae can be used as controlling bits for a photon gate, opening up new degrees of freedom in quantum manipulation.
Project description:Mechanical resonators are promising systems for storing and manipulating information. To transfer information between mechanical modes, either direct coupling or an interface between these modes is needed. In previous works, strong coupling between different modes in a single mechanical resonator and direct interaction between neighboring mechanical resonators have been demonstrated. However, coupling between distant mechanical resonators, which is a crucial request for long-distance classical and quantum information processing using mechanical devices, remains an experimental challenge. Here, we report the experimental observation of strong indirect coupling between separated mechanical resonators in a graphene-based electromechanical system. The coupling is mediated by a far-off-resonant phonon cavity through virtual excitations via a Raman-like process. By controlling the resonant frequency of the phonon cavity, the indirect coupling can be tuned in a wide range. Our results may lead to the development of gate-controlled all-mechanical devices and open up the possibility of long-distance quantum mechanical experiments.
Project description:We demonstrate a deterministic Purcell-enhanced single photon source realized by integrating an atomically thin WSe2 layer with a circular Bragg grating cavity. The cavity significantly enhances the photoluminescence from the atomically thin layer and supports single photon generation with g(2)(0) < 0.25. We observe a consistent increase of the spontaneous emission rate for WSe2 emitters located in the center of the Bragg grating cavity. These WSe2 emitters are self-aligned and deterministically coupled to such a broadband cavity, configuring a new generation of deterministic single photon sources, characterized by their simple and low-cost production and intrinsic scalability.
Project description:By using Mie resonance coupling effects, low-loss silicon particles as receiving or transmitting antennas can strongly localize the electromagnetic field. Enhanced extraordinary optical transmission (EEOT) is generated by placing two such silicon particles symmetrically on both sides of subwavelength hole arrays in the terahertz (THz) region. When the hole radius r is 17 times smaller than the resonance wavelength λ (r/λ = 0.06), the enhancement factors of the resonator-hole and the resonator-resonator coupling structures are 154- and 629-fold compared to that of the hole-only structure, respectively. The current distribution, magnetic field and Poynting vector are numerically simulated to reveal the mechanism of the proposed structure. Moreover, the Mie resonance coupling and the induced THz EEOT can be tuned in a wide frequency range. Our results provide a reference for the miniaturization of THz systems.
Project description:Despite the recent emergence of microcavity resonators as label-free biological and chemical sensors, practical applications still require simple and robust methods to impart chemical selectivity and reduce the cost of fabrication. We introduce the use of hydrocarbon-in-fluorocarbon-in-water (HC/FC/W) double emulsions as a liquid top cladding that expands the versatility of optical resonators as chemical sensors. The all-liquid complex emulsions are tunable droplets that undergo dynamic and reversible morphological transformations in response to a change in the chemical environment (e.g., exposure to targeted analytes). This chemical-morphological coupling drastically modifies the effective refractive index, allowing the complex emulsions to act as a chemical transducer and signal amplifier. We detect this large change in the refractive index by tracking the shift of the enveloped resonant spectrum of a silicon nitride (Si3N4) racetrack resonator-based sensor, which correlates well with a change in the morphology of the complex droplets. This combination of soft materials (dynamic complex emulsions) and hard materials (on-chip resonators) provides a unique platform for liquid-phase, real-time, and continuous detection of chemicals and biomolecules for miniaturized and remote, environmental, medical, and wearable sensing applications.
Project description:Emerging photonic information processing systems require chip-level integration of controllable nanoscale light sources at telecommunication wavelengths. Currently, substantial challenges remain in the dynamic control of the sources, the low-loss integration into a photonic environment, and in the site-selective placement at desired positions on a chip. Here, we overcome these challenges using heterogeneous integration of electroluminescent (EL), semiconducting carbon nanotubes (sCNTs) into hybrid two dimensional - three dimensional (2D-3D) photonic circuits. We demonstrate enhanced spectral line shaping of the EL sCNT emission. By back-gating the sCNT-nanoemitter we achieve full electrical dynamic control of the EL sCNT emission with high on-off ratio and strong enhancement in the telecommunication band. Using nanographene as a low-loss material to electrically contact sCNT emitters directly within a photonic crystal cavity enables highly efficient EL coupling without compromising the optical quality of the cavity. Our versatile approach paves the way for controllable integrated photonic circuits.
Project description:Optical cavities can enhance and control light-matter interactions. This level of control has recently been extended to the nanoscale with single emitter strong coupling even at room temperature using plasmonic nanostructures. However, emitters in static geometries, limit the ability to tune the coupling strength or to couple different emitters to the same cavity. Here, we present tip-enhanced strong coupling (TESC) with a nanocavity formed between a scanning plasmonic antenna tip and the substrate. By reversibly and dynamically addressing single quantum dots, we observe mode splitting up to 160 meV and anticrossing over a detuning range of ~100 meV, and with subnanometer precision over the deep subdiffraction-limited mode volume. Thus, TESC enables previously inaccessible control over emitter-nanocavity coupling and mode volume based on near-field microscopy. This opens pathways to induce, probe, and control single-emitter plasmon hybrid quantum states for applications from optoelectronics to quantum information science at room temperature.