Sustainable Electrosynthesis of Cyclohexanone Oxime through Nitrate Reduction on a Zn–Cu Alloy Catalyst
Ontology highlight
ABSTRACT:
SUBMITTER: Sharp J
PROVIDER: S-EPMC10913030 | biostudies-literature | 2024 Feb
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Coupling with the nitrate electroreduction reaction (NitRR), the electrosynthesis of cyclohexanone oxime (CHO, the vital feedstock in the nylon-6 industry) from cyclohexanone provides a promising alternative to the traditional energy consumption process. However, it still suffers from low efficiency because selective production of *NH2OH intermediate from NitRR under large current densities is challenging. We here report a Cu1MoOx/nitrogen-doped carbon (NC) electrocatalyst with high-density Cu-Mo dual sites for NitRR to selectively produce and stabilize *NH2OH, with the subsequent cyclohexanone oximation achieving the highest CHO Faradaic efficiency of 94.5% and a yield rate of 3.0 mol g-1 h-1 at an industrially relevant current density of 0.5 A cm-2. Furthermore, in situ characterizations evidenced that the Cu-Mo dual sites in Cu1MoOx/NC effectively inhibited hydrodeoxygenation of hydroxyl-containing intermediates of NitRR, selectively producing *NH2OH and thus achieving cyclohexanone oximation with high efficiency. This work provides a high-performance catalyst for CHO electrosynthesis from nitrogenous waste, showing promising application potential in industrial production of CHO.
| S-EPMC11688659 | biostudies-literature
Project description:Renewable energy-driven electrocatalytic nitrate reduction reaction presents a low-carbon and sustainable route for ammonia synthesis under mild conditions. Yet, the practical application of this process is currently hindered by unsatisfactory electrocatalytic activity and long-term stability. Herein we achieve high-rate ammonia electrosynthesis using a stable amorphous/crystalline dual-phase Cu catalyst. The ammonia partial current density and formation rate reach 3.33 ± 0.005 A cm-2 and 15.5 ± 0.02 mmol h-1 cm-2 at a low cell voltage of 2.6 ± 0.01 V, respectively. Remarkably, the dual-phase Cu catalyst can maintain stable ammonia production with a Faradaic efficiency of around 90% at a high current density of 1.5 A cm-2 for up to 300 h. A scale-up demonstration with an electrode size of 100 cm2 achieves an ammonia formation rate as high as 11.9 ± 0.5 g h-1 at a total current of 160 A. The impressive electrocatalytic performance is ascribed to the presence of stable amorphous Cu domains which promote the adsorption and hydrogenation of nitrogen-containing intermediates, thus improving reaction kinetics for ammonia formation. This work underscores the importance of stabilizing metastable amorphous structures for improving electrocatalytic reactivity and long-term stability.
| S-EPMC11751377 | biostudies-literature
Project description:A series of Cu-Pd alloy nanoparticles supported on Al2O3 were prepared and tested as catalysts for deNO x reactions. XRD, HAADF-STEM, XAFS, and FT-IR analyses revealed that a single-atom alloy structure was formed when the Cu/Pd ratio was 5, where Pd atoms were well isolated by Cu atoms. Compared with Pd/Al2O3, Cu5Pd/Al2O3 exhibited outstanding catalytic activity and N2 selectivity in the reduction of NO by CO: for the first time, the complete conversion of NO to N2 was achieved even at 175 °C, with long-term stability for at least 30 h. High catalytic performance was also obtained in the presence of O2 and C3H6 (model exhaust gas), where a 90% decrease in Pd use was achieved with minimum evolution of N2O. Kinetic and DFT studies demonstrated that N-O bond breaking of the (NO)2 dimer was the rate-determining step and was kinetically promoted by the isolated Pd.
| S-EPMC7006621 | biostudies-literature
Project description:Electrochemical nitrate reduction reaction (NO3RR) to ammonia has been regarded as a promising strategy to balance the global nitrogen cycle. However, it still suffers from poor Faradaic efficiency (FE) and limited yield rate for ammonia production on heterogeneous electrocatalysts, especially in neutral solutions. Herein, we report one-pot synthesis of ultrathin nanosheet-assembled RuFe nanoflowers with low-coordinated Ru sites to enhance NO3RR performances in neutral electrolyte. Significantly, RuFe nanoflowers exhibit outstanding ammonia FE of 92.9% and yield rate of 38.68 mg h-1 mgcat-1 (64.47 mg h-1 mgRu-1) at -0.30 and -0.65 V (vs. reversible hydrogen electrode), respectively. Experimental studies and theoretical calculations reveal that RuFe nanoflowers with low-coordinated Ru sites are highly electroactive with an increased d-band center to guarantee efficient electron transfer, leading to low energy barriers of nitrate reduction. The demonstration of rechargeable zinc-nitrate batteries with large-specific capacity using RuFe nanoflowers indicates their great potential in next-generation electrochemical energy systems.
| S-EPMC10410719 | biostudies-literature
Project description:The electrocatalytic reduction of nitrogenous waste offers a sustainable approach to producing nitrogen-containing chemicals. The selective synthesis of high-value hydroxylamine (NH2OH) is challenging due to the instability of NH2OH as an intermediate. Here, we present a rational electrocatalyst design strategy for promoting NH2OH electrosynthesis by suppressing the competing pathways of further reduction. We screen zinc phthalocyanines (ZnPc) with a high energy barrier for NH2OH reduction by regulating their intrinsic activity. Additionally, we discover that carbon nanotube substrates exhibit significant NH3-producing activity, which can be effectively inhibited by the high coverage of ZnPc molecules. In-situ characterizations reveal that NH2OH and HNO are generated as intermediates in nitrate reduction to NH3, and NH2OH can be enriched in the ZnPc electrode. In the H-cell, the optimized ZnPc catalyst demonstrates a Faradaic efficiency (FE) of 53 ± 1.7% for NH2OH with a partial current density exceeding 270 mA cm-2 and a turnover frequency of 7.5 ± 0.2 s-1. It also enables the rapid electrosynthesis of cyclohexanone oxime from nitrite with a FE of 64 ± 1.0%.
| S-EPMC11557954 | biostudies-literature
Project description:Despite the recent achievements in urea electrosynthesis from co-reduction of nitrogen wastes (such as NO3-) and CO2, the product selectivity remains fairly mediocre due to the competing nature of the two parallel reduction reactions. Here we report a catalyst design that affords high selectivity to urea by sequentially reducing NO3- and CO2 at a dynamic catalytic centre, which not only alleviates the competition issue but also facilitates C-N coupling. We exemplify this strategy on a nitrogen-doped carbon catalyst, where a spontaneous switch between NO3- and CO2 reduction paths is enabled by reversible hydrogenation on the nitrogen functional groups. A high urea yield rate of 596.1 µg mg-1 h-1 with a promising Faradaic efficiency of 62% is obtained. These findings, rationalized by in situ spectroscopic techniques and theoretical calculations, are rooted in the proton-involved dynamic catalyst evolution that mitigates overwhelming reduction of reactants and thereby minimizes the formation of side products.
| S-EPMC10761727 | biostudies-literature
Project description:At present research, we highlight ultrasonic treatment as a new way to create materials with a gradient change of chemical or physical properties. We demonstrate the possibility to fabricate novel materials with biocide activity based on simple and cheap Cu-Zn alloy. In this research, we propose a green preparative technique for the sonication of an alloy in an alkali solution. The method leads to a significant visual change and differentiation of particles into three different fractions. Due to the chemical micro gradients in media near the solid surface under intensive sonication, fast formation of specific functional groups occurs on the particles' surface. The particles were studied X-ray diffraction analysis (XRD) analysis, the field-emission scanning electron microscope (SEM) as well as electron backscatter diffraction (EBSD) mode, X-ray Photoelectron Spectroscopy (XPS), the differential pulse anodic stripping voltammetry (DPASV) technique. A strong correlation of both methods proves a redistribution of copper ions from Fraction I to Fraction III that influence for the antibacterial properties of the prepared material. The different biocidal activity was demonstrated for each separated Fraction that could be related to their different phase content and ability to release the different types of ions.
| S-EPMC9763737 | biostudies-literature
Project description:Rechargeable aqueous zinc-metal batteries, considered as the possible post-lithium-ion battery technology for large-scale energy storage, face severe challenges such as dendrite growth and hydrogen evolution side reaction (HER) on Zn negative electrode. Herein, a three-dimensional Cu-In alloy interface is developed through a facile potential co-replacement route to realize uniform Zn nucleation and HER anticatalytic effect simultaneously. Both theoretical calculations and experimental results demonstrate that this bifunctional Cu-In alloy interface inherits the merits of low Zn-nucleation overpotential and high HER overpotential from individual copper and indium constituents, respectively. Moreover, the dynamical self-reconstruction during cycling leads to an HER-anticatalytic and zincophilic gradient hierarchical structure, enabling highly reversible Zn chemistry with dendrite-free Zn (002) deposition and inhibited HER. Moreover, the improved interface stability featured by negligible pH fluctuations in the diffusion layer and suppressed by-product formation is evidenced by in-situ scanning probe technology, Raman spectroscopy, and electrochemical gas chromatography. Consequently, the lifespan of the CuIn@Zn symmetric cell is extended to more than one year with a voltage hysteresis of 6 mV. Importantly, the CuIn@Zn negative electrode is also successfully coupled with high-loading iodine positive electrode to fabricate Ah-level (1.1 Ah) laminated pouch cell, which exhibits a capacity retention of 67.9% after 1700 cycles.
| S-EPMC11530701 | biostudies-literature
Project description:Electrocatalytic urea synthesis is an emerging alternative technology to the traditional energy-intensive industrial urea synthesis protocol. Novel strategies are urgently needed to promote the electrocatalytic C-N coupling process and inhibit the side reactions. Here, we report a CuWO4 catalyst with native bimetallic sites that achieves a high urea production rate (98.5 ± 3.2 μg h-1 mg-1cat) for the co-reduction of CO2 and NO3- with a high Faradaic efficiency (70.1 ± 2.4%) at -0.2 V versus the reversible hydrogen electrode. Mechanistic studies demonstrated that the combination of stable intermediates of *NO2 and *CO increases the probability of C-N coupling and reduces the potential barrier, resulting in high Faradaic efficiency and low overpotential. This study provides a new perspective on achieving efficient urea electrosynthesis by stabilizing the key reaction intermediates, which may guide the design of other electrochemical systems for high-value C-N bond-containing chemicals.
| S-EPMC10372083 | biostudies-literature
Project description:Electrochemical conversion of nitrate to ammonia offers an efficient approach to reducing nitrate pollutants and a potential technology for low-temperature and low-pressure ammonia synthesis. However, the process is limited by multiple competing reactions and NO3- adsorption on cathode surfaces. Here, we report a Fe/Cu diatomic catalyst on holey nitrogen-doped graphene which exhibits high catalytic activities and selectivity for ammonia production. The catalyst enables a maximum ammonia Faradaic efficiency of 92.51% (-0.3 V(RHE)) and a high NH3 yield rate of 1.08 mmol h-1 mg-1 (at - 0.5 V(RHE)). Computational and theoretical analysis reveals that a relatively strong interaction between NO3- and Fe/Cu promotes the adsorption and discharge of NO3- anions. Nitrogen-oxygen bonds are also shown to be weakened due to the existence of hetero-atomic dual sites which lowers the overall reaction barriers. The dual-site and hetero-atom strategy in this work provides a flexible design for further catalyst development and expands the electrocatalytic techniques for nitrate reduction and ammonia synthesis.
| S-EPMC10279643 | biostudies-literature