How Does Radiation Affect Curcumin Raw Material?
Ontology highlight
ABSTRACT:
SUBMITTER: Rosiak N
PROVIDER: S-EPMC10931914 | biostudies-literature | 2024 Feb
REPOSITORIES: biostudies-literature
Publications
How Does Radiation Affect Curcumin Raw Material?
Rosiak Natalia N Garbiec Ewa E Bednarski Waldemar W Skibiński Robert R Lewandowska Kornelia K Bazan-Woźniak Aleksandra A Pietrzak Robert R Cielecka-Piontek Judyta J Zalewski Przemysław P
International journal of molecular sciences 20240221 5
Turmeric, known for its curcuminoid-rich rhizome, particularly curcumin, exhibits notable antioxidant and antiviral properties. The likelihood of microbial contamination necessitates finding reliable techniques for subjecting the sample to radiation from this plant-based raw material. One alternative is to expose curcumin to radiation (e-beam), which was carried out as part of this research. Confirmation of the lack of curcumin decomposition was carried out using HPLC-DAD/MS techniques. Addition ...[more]
Similar Datasets
Project description:Turmeric (Curcuma longa L.) has been used as a spice and a medicinal herb since ancient times. The main active ingredient of turmeric is curcumin, a polyphenol that helps prevent and control neurological, respiratory, cardiovascular, metabolic, inflammatory, and autoimmune diseases and some cancers. However, curcumin has drawbacks such as low water-solubility, poor absorption, fast metabolism, quick systemic elimination, low bioavailability, poor pharmacokinetics, low stability, and low penetration targeting efficacy. To overcome these drawbacks, a common method used is encapsulating curcumin in nanocarriers for targeted delivery. However, the degraded products of nanocarriers have raised concerns. In this research, we synthesized nanoparticles of curcumin, nanocurcumin without using nanocarriers. To do so, curcumin was soxhlet extracted from raw turmeric rhizome. The stock solutions of different curcumin concentrations prepared in dichloromethane were added to boiling water at different flow rates and sonicated for different time intervals. An average particle size of 82 ± 04 nm was obtained with 5.00 mg/mL stock solution concentration, at 0.10 mL/min flow rate and 30 min sonication time. The particle size tends to increase with the flow rate and the concentration of curcumin in the stock solution but decreases with the sonication time. X-ray diffraction shows sharp and intense diffraction peaks for curcumin, indicating its identity and high crystallinity, but nanocurcumins are amorphous. Fourier-transform infrared spectroscopy spectra confirm the presence of all the functional groups of curcumin in nanocurcumin. Transmission electron microscopy and scanning electron microscopy images show the perfectly spherical morphology of nanocurcumin. Although curcumin is not water-soluble, nano-curcumin formulations are freely dispersible in water.
| S-EPMC8015141 | biostudies-literature
Project description:The probability of human exposure to damaging radiation is increased in activities associated with long-term space flight, medical radiation therapies, and responses to nuclear accidents. However, the development of responsive countermeasures to combat radiation damage to biological tissue is lagging behind rates of human exposure. Herein, we report a radiation-responsive drug delivery system that releases doses of curcumin from a chitosan polymer/film in response to low level gamma radiation exposure. As a fibrous chitosan-curcumin polymer, 1 Gy gamma irradiation (137Cs) released 5 ± 1% of conjugated curcumin, while 6 Gy exposure releases 98 ± 1% of conjugated curcumin. The same polymer was formed into a film through solvent casting. The films showed similar, albeit attenuated behavior in water (100% released) and isopropyl alcohol (32% released) with statistically significant drug release following 2 Gy irradiation. ATR FT-IR studies confirmed glycosidic bond cleavage in the chitosan-curcumin polymer in response to gamma radiation exposure. Similar behavior was noted upon exposure of the polymer to 20 cGy (1 GeV amu-1, at 20 cGy min-1) high linear energy transfer (LET) 56Fe radiation based on FTIR studies. Density Functional Theory calculations indicate homolytic bond scission as the primary mechanism for polymer disintegration upon radiation exposure. Films did not change in thickness during the course of radiation exposure. The successful demonstration of radiation-triggered drug release may lead to new classes of radio-protective platforms for developing countermeasures to biological damage from ionizing radiation.
| S-EPMC9052875 | biostudies-literature
Project description:Animals that manufacture foraging tools face the challenge of identifying suitable raw materials among a multitude of options. New Caledonian crows exhibit strong population-specific material preferences for the manufacture of hooked stick tools, but it is unknown how they identify their favourite plants. We investigated experimentally whether crows pay attention to the stems of plants (from which the tools are made) and/or their leaves (which are usually discarded during manufacture but may enable rapid and reliable species identification at a distance). Subjects were highly selective in choice trials with multiple plant species. Two additional treatments with experimental leaf-stem combinations revealed that birds can identify their preferred plant species by its stems alone, and possibly also its leaves. These findings encourage future experiments that investigate whether New Caledonian crows attend to features of the stem that are required for the production of efficient hooked stick tools. Our study provides one of the most detailed assessments to date of how non-human animals identify raw materials for tool manufacture.
| S-EPMC6405461 | biostudies-literature
Project description:Decreasing oil extraction stimulates attempts to use biologically available sources to produce polyols, which are the basic components for obtaining polyurethane foams. Plants are inexhaustible source of oils, sugars, starches, and cellulose. Similar substrates to obtain polyols are chitosans. Commercially available modified chitosans are soluble in water, which gives them the possibility to react with hydroxyalkylating agents. We used a water-soluble chitosan previously to obtain polyols suitable for producing rigid polyurethane foams. Here, we described hydroxyalkylation of a low-molecular-weight chitosan (oligomeric chitosan) with glycidol and ethylene carbonate to obtain polyols. The polyols were isolated and studied in detail by IR, 1H-NMR, and MALDI-ToF methods. Their properties, such as density, viscosity, surface tension, and hydroxyl numbers, were determined. The progress of the hydroxyalkylation reaction of water-soluble chitosan and chitosan oligomer with glycidol was compared in order to characterize the reactivity and mechanism of the process. We found that the hydroxyalkylation of chitosan with glycidol in glycerol resulted in the formation of a multifunctional product suitable for further conversion to polyurethane foams with favorable properties. The straightforward hydroxyalkylation of chitosan with glycidol was accompanied by the oligomerization of glycidol. The hydroxyalkylation of chitosan with glycidol in the presence of ethylene carbonate was accompanied by minor hydroxyalkylation of chitosan with ethylene carbonate. The chosen polyols were used to obtain rigid polyurethane foams which were characterized by physical parameters such as apparent density, water uptake, dimension stability, heat conductance, compressive strength, and heat resistance at 150 and 175 °C. The properties of polyurethane foams obtained from chitosan-oligomer and water-soluble-chitosan sources were compared. Polyurethane foams obtained from polyols synthesized in the presence of glycerol had advantageous properties such as low thermal conductivity, enhanced thermal resistance, dimensional stability, low water uptake, and high compressive strength, growing remarkably upon thermal exposure.
| S-EPMC10384285 | biostudies-literature
Project description:Measuring circularity is necessary to prove the feasibility of transforming linear technologies into circular ones. However, most of the circular economic researches consider water only as a medium. Food industry processes are excellent examples of systems that are hard to break free from linearity, albeit not impossible. This paper explores solutions to include water in circularity calculations using a Hungarian poultry processing plant as a case study. Two circular economic indicators, the questionnaire-type Circular Economy Indicator Prototype (CEIP) and the product-centric Material Circularity Indicator (MCI and MCI') and the Water Footprint were examined in detail and modified to fit the needs of assessing circularity with water included as raw material. The calculations were supported by Life Cycle Assessment (LCA). The impact on circularity and the environment were quantified by considering different reuse scenarios. As the results of CEIP show, including water reuse in the technology or recycling for irrigation could increase the indicator values from low to medium-high level of circularity. However, the level of improvement highly depends on the amount of water used. LCA highlighted the significant environmental effects of packaging (<2% of product mass) and the relative benefits of recycling and reuse. The MCI' values (including water as raw material) increased from 0.171 to 0.848 when water demand was reduced by 50% and 100% reused within the processes. This led to a reduction of 76% in the environmental effect. On the other hand, Water Footprint analysis showed that 99% of the water is incorporated in the product itself; therefore, technological water consumption should be treated separately from broiler breeding. The results show that a fairly linear process can be directed towards circularity. However, environmental benefits are not guaranteed with higher circularity points, and recycling may lead to unexpected results.
| S-EPMC10359734 | biostudies-literature
Project description:ObjectiveThis study was initiated and conducted by several laboratories, 3 of the main cosmetic ingredient suppliers and 4 brands of cosmetics in France. Its objective is to show the interest and robustness of coupling chemical and genetic analyses in the identification of plant species. In this study, the Lavandula genus was used.MethodsIn this study, we used two analytical methods. Chemical analysis from UHPLC (ultra-high-performance liquid chromatography) and genetic analysis from barcoding with genetic markers.ResultsEleven lavender species were selected (botanically authenticated) and analysed. The results show that three chemical compounds (coumaric acid hexoside, ferulic acid hexoside and rosmarinic acid) and three genetic markers (RbcL, trnH-psbA and ITS) are of interest for the differentiation of species of the genus lavandula.ConclusionThe results show that the combination of complementary analytical methods is a relevant system to prove the botanical identification of lavender species. This first study, carried out on a plant of interest for cosmetics, demonstrates the need for authentication using a tool combining genetic and chemical analysis as an advance over traditional investigation methods used alone, in terms of identification and authentication reliability.
| S-EPMC9305429 | biostudies-literature
Project description:Grapevine canes are viticulture waste that is usually discarded without any further use. However, recent studies have shown that they contain significant concentrations of health-promoting compounds, such as stilbenes, secondary metabolites of plants produced as a response to biotic and abiotic stress from fungal disease or dryness. Stilbenes have been associated with antioxidant, anti-inflammatory, and anti-microbial properties and they have been tested as potential treatments of cardiovascular and neurological diseases, and even cancer, with promising results. Stilbenes have been described in the different genus of the Vitaceae family, the Vitis genera being one of the most widely studied due to its important applications and economic impact around the world. This review presents an in-depth study of the composition and concentration of stilbenes in grapevine canes. The results show that the concentration of stilbenes in grapevine canes is highly influenced by the Vitis genus and cultivar aspects (growing conditions, ultraviolet radiation, fungal attack, etc.). Different methods for extracting stilbenes from grapevine canes have been reviewed, and the extraction conditions have also been studied, underlining the advantages and disadvantages of each technique. After the stilbenes were extracted, they were analyzed to determine the stilbene composition and concentration. Analytical techniques have been employed with this aim, in most cases using liquid chromatography, coupled with others such as mass spectrometry and/or nuclear magnetic resonance to achieve the individual quantification. Finally, stilbene extracts may be applied in multiple fields based on their properties. The five most relevant are preservative, antifungal, insecticide, and biostimulant applications. The current state-of-the-art of the above applications and their prospects are discussed.
| S-EPMC7464460 | biostudies-literature
Project description:Many objects that we encounter have typical material qualities: spoons are hard, pillows are soft, and Jell-O dessert is wobbly. Over a lifetime of experiences, strong associations between an object and its typical material properties may be formed, and these associations not only include how glossy, rough, or pink an object is, but also how it behaves under force: we expect knocked over vases to shatter, popped bike tires to deflate, and gooey grilled cheese to hang between two slices of bread when pulled apart. Here we ask how such rich visual priors affect the visual perception of material qualities and present a particularly striking example of expectation violation. In a cue conflict design, we pair computer-rendered familiar objects with surprising material behaviors (a linen curtain shattering, a porcelain teacup wrinkling, etc.) and find that material qualities are not solely estimated from the object's kinematics (i.e., its physical [atypical] motion while shattering, wrinkling, wobbling etc.); rather, material appearance is sometimes "pulled" toward the "native" motion, shape, and optical properties that are associated with this object. Our results, in addition to patterns we find in response time data, suggest that visual priors about materials can set up high-level expectations about complex future states of an object and show how these priors modulate material appearance.
| S-EPMC7645227 | biostudies-literature
Project description:Radiation therapy is an effective method to kill cancer cells and shrink tumors using high-energy X-ray or γ-ray. Radiation pneumonitis (RP) is one of the most serious complications of radiation therapy for thoracic cancers, commonly leading to serious respiratory distress and poor prognosis. Here, we prepared curcumin-loaded mesoporous polydopamine nanoparticles (CMPN) for prevention and treatment of RP by pulmonary delivery. Mesoporous polydopamine nanoparticles (MPDA) were successfully synthesized with an emulsion-induced interface polymerization method and curcumin was loaded in MPDA via π‒π stacking and hydrogen bonding interaction. MPDA owned the uniform spherical morphology with numerous mesopores that disappeared after loading curcumin. More than 80% curcumin released from CMPN in 6 h and mesopores recovered. CMPN remarkably protected BEAS-2B cells from γ-ray radiation injury by inhibiting apoptosis. RP rat models were established after a single dose of 15 Gy 60Co γ-ray radiation was performed on the chest area. Effective therapy of RP was achieved by intratracheal administration of CMPN due to free radical scavenging and anti-oxidation ability, and reduced proinflammatory cytokines, high superoxide dismutase, decreased malondialdehyde, and alleviated lung tissue damages were observed. Inhaled CMPN paves a new avenue for the treatment of RP.
| S-EPMC9136532 | biostudies-literature
Project description:Hoard finds from the Bronze Age have appeared all over Europe, prompting questions about their functions (either as raw materials for recycling or votive objects). The hoard trove of raw materials from Przybysław in Greater Poland is an interesting example of a discovery that is related to the foundry activities of Late Bronze Age and Early Iron Age communities (c. 600 BC). The deposit consists of fragments of raw materials that were damaged end products intended for smelting. The research included the characterisation of the material in terms of the variety of the raw materials that were used. The individual elements of the hoard were characterised in terms of their chemical compositions, microstructures, and properties. A range of modern instrumental research methods were used: metallographic macroscopic and microscopic observations by optical microscopy (OM), scanning electron microscopy (SEM), chemical-composition analysis by X-ray fluorescence spectroscopy (ED-XRF), X-ray microanalysis (EDS), and detailed crystallisation analysis by electron microscopy with an emphasis on electron backscatter diffraction (EBSD). As part of this study, model alloys were also prepared for two of the selected chemical compositions, (i.e., CuPbSn and CuPb). These alloys were analysed for their mechanical and technological properties. This research of the hoard from Przybysław (Jarocin district, Greater Poland) has contributed to the recognition and interpretation of the function and nature of the hoard by using modern research and modelling methods as a cultic raw material deposit.
| S-EPMC10780300 | biostudies-literature