Dataset Information

Compressive Stress and Charge Redistribution during CO Adsorption onto Pt.

ABSTRACT: The change in surface stress associated with the adsorption and oxidative stripping of carbon monoxide (CO) on (111)-textured Pt is examined using the wafer curvature method in 0.1 mol/L KHCO₃ electrolyte. The curvature of the Pt cantilever electrode was monitored as a function of potential in both CO-free and CO-saturated electrolytes. Although CO adsorbs as a neutral molecule, significant compressive stress, up to -1.3 N/m, is induced in the Pt. The magnitude of the stress change correlates directly with the CO coverage and, within the detection limits of the stress measurement, is elastically reversible. Density functional theory calculations of a CO-bound Pt surface indicate that charge redistribution from the first atomic layer of Pt to subsurface layers accounts for the observed compressive stress induced by the charge neutral adsorption of CO. A better understanding of adsorbate-induced surface stress is critical for the development of material platforms for sensing and catalysis.

SUBMITTER: Raciti D

PROVIDER: S-EPMC10938457 | biostudies-literature | 2022 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Compressive Stress and Charge Redistribution during CO Adsorption onto Pt.

Raciti David D Schwarz Kathleen A KA Vinson John J Stafford Gery R GR

The journal of physical chemistry. C, Nanomaterials and interfaces 20220301 9

The change in surface stress associated with the adsorption and oxidative stripping of carbon monoxide (CO) on (111)-textured Pt is examined using the wafer curvature method in 0.1 mol/L KHCO<sub>3</sub> electrolyte. The curvature of the Pt cantilever electrode was monitored as a function of potential in both CO-free and CO-saturated electrolytes. Although CO adsorbs as a neutral molecule, significant compressive stress, up to -1.3 N/m, is induced in the Pt. The magnitude of the stress change co ...[more]

PMID: 38487392

Similar Datasets

Project description:A leading challenge in drinking water treatment is to remove small-sized viruses from the water in a simple and efficient manner. Multi-walled carbon nanotubes (MWCNT) are new generation adsorbents with previously demonstrated potential as filter media to improve virus removal. This study therefore aimed to evaluate the field applicability of MWCNT-filters for virus removal in water containing natural organic matter (NOM) as co-solute to viruses, using batch equilibrium experiments. Contrary to previous studies, our results showed with MS2 bacteriophages single-solute systems that the affinity of MWCNT for MS2 was low, since after 3 h of equilibration only 4 log10 reduction value (LRV) of MS2 (20 mL at an initial concentration of 106 PFU MS2/mL) were reached. Single solute experiments with Suwannee river NOM (SRNOM) performed with environmentally-relevant concentrations showed MWCNT surface saturation at initial SRNOM concentrations between 10 and 15 mgC/L, for water pH between 5.2 and 8.7. These results suggested that at NOM:virus ratios found in natural waters, the NOM would competitively suppress virus adsorption onto MWCNT, even at low NOM concentrations. We confirmed this expectation with SRNOM-MS2 co-solute experiments, which showed an exponential decrease of the MS2 LRV by MWCNT with an increase in the initial SRNOM concentration. More interestingly, we showed that pre-equilibrating MWCNT with a SRNOM solution at a concentration as low as 0.4 mgC/L resulted in a LRV decrease of 3 for MS2, due to the formation of a negatively charged SRNOM adlayer on the MWCNT surface. Complementary batch experiments with natural NOM-containing waters and competition experiments with SRNOM in the presence of CaCl2 confirmed that the presence of NOM in waters challenges virus removal by MWCNT-filters, irrespective of the concentration and type of NOM and also in the presence of Ca2+. We therefore conclude that MWCNT-filters produced with commercially available pristine MWCNT cannot be considered as a viable technology for drinking water virus removal.

Project description:The adsorption of thallium (Tl) onto phyllosilicate minerals plays a critical role in the retention of Tl in soils and sediments and the potential transfer of Tl into plants and groundwater. Especially micaceous minerals are thought to strongly bind monovalent Tl(I), in analogy to their strong binding of Cs. To advance the understanding of Tl(I) adsorption onto phyllosilicate minerals, we studied the adsorption of Tl(I) onto Na- and K-saturated illite and Na-saturated smectite, two muscovites, two vermiculites and a naturally Tl-enriched soil clay mineral fraction. Macroscopic adsorption isotherms were combined with the characterization of the adsorbed Tl by X-ray absorption spectroscopy (XAS). In combination, the results suggest that the adsorption of Tl(I) onto phyllosilicate minerals can be interpreted in terms of three major uptake paths: (i) highest-affinity inner-sphere adsorption of dehydrated Tl+ on a very low number of adsorption sites at the wedge of frayed particle edges of illite and around collapsed zones in vermiculite interlayers through complexation between two siloxane cavities, (ii) intermediate-affinity inner-sphere adsorption of partially dehydrated Tl+ on the planar surfaces of illite and muscovite through complexation onto siloxane cavities, (iii) low-affinity adsorption of hydrated Tl+, especially in the hydrated interlayers of smectite and expanded vermiculite. At the frayed edges of illite particles and in the vermiculite interlayer, Tl uptake can lead to the formation of new wedge sites that enable further adsorption of dehydrated Tl+. On the soil clay fraction, a shift in Tl(I) uptake from frayed edge sites (on illite) to planar sites (on illite and muscovite) was observed with increasing Tl(I) loading. The results from this study show that the adsorption of Tl(I) onto phyllosilicate minerals follows the same trends as reported for Cs and Rb and thus suggests that concepts to describe the retention of (radio)cesium by different types of phyllosilicate minerals in soils, sediments and rocks are also applicable to Tl(I).

Project description:The sensitive electronic environment at the quantum dot (QD)-dye interface becomes a roadblock to enhancing the energy conversion efficiency of dye-functionalized quantum dots (QDs). Energy alignments and electronic couplings are the critical factors governing the directions and rates of different charge transfer pathways at the interface, which are tunable by changing the specific linkage groups that connect a dye to the QD surface. The variation of specific anchors changes the binding configurations of a dye on the QD surface. In addition, the presence of a co-adsorbent changes the dipole-dipole and electronic interactions between a QD and a dye, resulting in different electronic environments at the interface. In the present work, we performed density functional theory (DFT)-based calculations to study the different binding configurations of N719 dye on the surface of a Cd33Se33 QD with a co-adsorbent D131 dye. The results revealed that the electronic couplings for electron transfer were greater than for hole transfer when the structure involved isocyanate groups as anchors. Such strong electronic couplings significantly stabilize the occupied states of the dye, pushing them deep inside the valence band of the QD and making hole transfer in these structures thermodynamically unfavourable. When carboxylates were involved as anchors, the electronic couplings for hole transfer were comparable to electron transfer, implying efficient charge separation at the QD-dye interface and reduced electron-hole recombination within the QD. We also found that the electronic couplings for electron transfer were larger than those for back electron transfer, suggesting efficient charge separation in photoexcited QDs. Overall, the current computational study reveals some fundamental aspects of the relationship between the interfacial charge transfer for QD@dye composites and their morphologies which benefit the design of QD-based nanomaterials for photovoltaic applications.

Dataset Information

Compressive Stress and Charge Redistribution during CO Adsorption onto Pt.

Publications

Compressive Stress and Charge Redistribution during CO Adsorption onto Pt.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets