Dataset Information

Failure mechanisms data analysis during tension of additively manufactured Ti-6Al-4V alloy reinforced with nano-zirconia particles: Investigations of the crack path.

ABSTRACT: The data presented here aim to show how to analyze crack propagation of a novel metallic matrix composite of Ti-6Al-4V reinforced with 1 wt.% nano-yttria-stabilized zirconia processed by laser powder bed fusion technology. The data was acquired via microstructural observations and electron backscatter diffraction (EBSD) analyses after the quasistatic tensile tests at room temperature. The overall crack path configuration based on the fracture surface observation by scanning electron microscopy (SEM) was first operated, presenting two main regions: (i) local inclined planes (hereafter denoted as "stair-like"), and (ii) region in accordance with the theoretical mode I fracture plane. Thereafter, a series of EBSD data set on a surface obtained after longitudinal cut off operation on one failed piece was conducted at three distinct positions: (i) in the stair-like configuration region, (ii) in the mode I fracture region, and (iii) in the region where the crack path made his transition between these two mechanisms. Since the EBSD data sets were not prone to any post-processing filtering operation, comparison of the observed mechanism with other Ti-6Al-4V alloy processed by additive manufacturing (AM) technology can be easily carried out.

SUBMITTER: Guennec B

PROVIDER: S-EPMC10957374 | biostudies-literature | 2024 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Failure mechanisms data analysis during tension of additively manufactured Ti-6Al-4V alloy reinforced with nano-zirconia particles: Investigations of the crack path.

Guennec Benjamin B Hattal Amine A Nagano Kentaro K Hocini Azziz A Mukhtarova Kamilla K Kinoshita Takahiro T Horikawa Noriyo N Fujiwara Hiroshi H Gubicza Jenő J Djemaï Madjid M Dirras Guy G

Data in brief 20240301

The data presented here aim to show how to analyze crack propagation of a novel metallic matrix composite of Ti-6Al-4V reinforced with 1 wt.% nano-yttria-stabilized zirconia processed by laser powder bed fusion technology. The data was acquired via microstructural observations and electron backscatter diffraction (EBSD) analyses after the quasistatic tensile tests at room temperature. The overall crack path configuration based on the fracture surface observation by scanning electron microscopy ( ...[more]

PMID: 38524838

Similar Datasets

Project description:The addition of porosity to the traditionally used solid titanium metal implants has been suggested to more closely mimic the natural mechanical properties of bone and increase osseointegration in dental and orthopedic implants. The objective of this study was to evaluate cellular response to three-dimensional (3D) porous Ti-6Al-4V constructs fabricated by additive manufacturing using laser sintering with low porosity (LP), medium porosity (MP), and high porosity (HP) with low resolution (LR) and high resolution (HR) based on a computed tomography scan of human trabecular bone. After surface processing, construct porosity ranged from 41.0% to 76.1%, but all possessed micro-/nanoscale surface roughness and similar surface chemistry containing mostly Ti, O, and C. Biological responses (osteoblast differentiation, maturation, and local factor production) by MG63 osteoblast-like cells and normal human osteoblasts favored 3D than two-dimensional (2D) solid constructs. First, MG63 cells were used to assess differences in cell response to 2D compared to LR and HR porous 3D constructs. MG63 cells were sensitive to porosity resolution and exhibited increased osteocalcin (OCN), vascular endothelial growth factor (VEGF), osteoprotegerin (OPG), and bone morphogenetic protein 2 (BMP2) on HR 3D constructs than on 2D and LR 3D constructs. MG63 cells also exhibited porosity-dependent responses on HR constructs, with up to a 6.9-fold increase in factor production on LP-HR and MP-HR constructs than on HP-HR constructs. NHOsts were then used to validate biological response on HR constructs. NHOsts exhibited decreased DNA content and alkaline phosphatase activity and up to a 2.9-fold increase in OCN, OPG, VEGF, BMP2, and BMP4 on 3D HR constructs than on 2D controls. These results indicate that osteoblasts prefer a 3D architecture than a 2D surface and that osteoblasts are sensitive to the resolution of trabecular detail and porosity parameters of laser-sintered 3D Ti-6Al-4V constructs.

Dataset Information

Failure mechanisms data analysis during tension of additively manufactured Ti-6Al-4V alloy reinforced with nano-zirconia particles: Investigations of the crack path.

Publications

Failure mechanisms data analysis during tension of additively manufactured Ti-6Al-4V alloy reinforced with nano-zirconia particles: Investigations of the crack path.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets