Single-atom platinum with asymmetric coordination environment on fully conjugated covalent organic framework for efficient electrocatalysis
Ontology highlight
ABSTRACT:
SUBMITTER: Zhang Z
PROVIDER: S-EPMC10960042 | biostudies-literature | 2024 Jan
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Covalent organic frameworks (COFs) are a promising alternative toward catalysis, due to the unique framework structure and the excellent chemical stability. However, the scarcity of unsaturated metal sites and the low conductivity have constrained the advancement of these materials for catalysis of electrochemical reactions. Exploring next-generation conductive metal-covalent organic frameworks (M-COFs) with extra metal active sites is crucial for improving their catalytic activity. Herein, a novel fully-conjugated M-COFs (Co-PorBpy-Co) with two types of metal sites is proposed and achieved by solvothermal method in the presence of carbon nanotube (CNT). The electrocatalyst constructed by the Co-PorBpy-Co exhibits excellent oxygen reduction reaction (ORR) activity (E1/2 = 0.84 V vs RHE, n = 3.86), superior to most COFs-based catalysts. Theoretical result shows the CoN2 sites are extremely active for ORR, and Co-PorBpy-Co exhibits excellent conductivity for electron transfer. The Zn-air battery constructed by Co-PorBpy-Co/CNT manifests excellent power density (159.4 mW cm-2 ) and great cycling stability, surpassing that of 20 wt% Pt/C catalyst. This work not only proposes a novel design concept for electrocatalysts, but establishes a mechanism platform for single-metal atom electrocatalysis and synergistic effect.
| S-EPMC10037685 | biostudies-literature
Project description:Structural modularity of polymer frameworks is a key advantage of covalent organic polymers, however, only C, N, O, Si, and S have found their way into their building blocks so far. Here, the toolbox available to polymer and materials chemists is expanded by one additional nonmetal, phosphorus. Starting with a building block that contains a λ5 -phosphinine (C5 P) moiety, a number of polymerization protocols are evaluated, finally obtaining a π-conjugated, covalent phosphinine-based framework (CPF-1) through Suzuki-Miyaura coupling. CPF-1 is a weakly porous polymer glass (72.4 m2 g-1 BET at 77 K) with green fluorescence (λmax =546 nm) and extremely high thermal stability. The polymer catalyzes hydrogen evolution from water under UV and visible light irradiation without the need for additional co-catalyst at a rate of 33.3 μmol h-1 g-1 . These results demonstrate for the first time the incorporation of the phosphinine motif into a complex polymer framework. Phosphinine-based frameworks show promising electronic and optical properties, which might spark future interest in their applications in light-emitting devices and heterogeneous catalysis.
| S-EPMC6790668 | biostudies-literature
Project description:While metal-organic frameworks (MOF) alone offer a wide range of structural tunability, the formation of composites, through the introduction of other non-native species, like polymers, can further broaden their structure/property spectrum. Here we demonstrate that a polymer, placed inside the MOF pores, can support the collapsible MOF and help inhibit the aggregation of nickel during pyrolysis; this leads to the formation of single atom nickel species in the resulting nitrogen doped carbons, and dramatically improves the activity, CO selectivity and stability in electrochemical CO2 reduction reaction. Considering the vast number of multifarious MOFs and polymers to choose from, we believe this strategy can open up more possibilities in the field of catalyst design, and further contribute to the already expansive set of MOF applications.
| S-EPMC8162436 | biostudies-literature
Project description:Radioactive iodine in the nuclear field is considered very dangerous nuclear waste because of its chemical toxicity, high mobility and long radioactive half-life. Herein, a conjugated two-dimensional covalent organic framework, TPB-TMPD-COF, has been designed and synthesized for iodine capture. TPB-TMPD-COF has been well characterized by several techniques and showed long order structure and a large surface area (1090 m2 g-1). Moreover, TPB-TMPD-COF shows a high iodine capture value at 4.75 g g-1 under 350 K and normal pressure conditions, benefitting from the increased density of adsorption sites. By using multiple techniques, the iodine vapor adsorbed into the pores may readily generate the electron transfer species (I3- and I5-) due to the strong interactions between imine groups and iodine molecules, which contributes to the high iodine uptake for TPB-TMPD-COF. Our study will stimulate the design and synthesis of COFs as a solid-phase adsorbent for iodine uptake.
| S-EPMC10767867 | biostudies-literature
Project description:Conjugated coordination polymers (CCPs) with extended π-d conjugation, which can effectively promote long-range delocalization of electrons and enhance conductivity, are superior to traditional metal-organic frameworks (MOFs) and attracted great attention for potential applications in chemical sensors, electronics, energy conversion/storage devices, etc. However, the precise construction of CCPs is still challenging due to the complex and uncontrollable reactions of CCPs. Herein, two different framework dimensions of CCPs are controllably realized by employing the same ligand (2,3,5,6-tetraaminobenzoquinone (TABQ)) and the same metal (copper) as center ions. The manipulation of reaction leads to different valences of ligands and metal ions, different coordination geometries, and thereby 1D-CuTABQ and 2D-CuTABQ frameworks, respectively. High performance of charge storage is hence achieved involving the storage of both cations and anions, and therein, 2D-CuTABQ shows a high reversible capacity of ≈305 mAh g-1 , good rate capability and high capacity retention (≈170 mAh g-1 after 2000 cycles at 5 A g-1 with 0.01% decay per cycle), which outperforms 1D-CuTABQ and almost all of the reported MOFs as cathodes for batteries. These results highlight the delicate structural control of CCPs for high-performance batteries and other various applications.
| S-EPMC9929263 | biostudies-literature
Project description:Tailoring the local chemistry environment to optimize the geometric and electronic properties of single atom catalysts has received much attention recently. Yet, most efforts have been devoted to establishing the preferable binding between the solid support and the single metal atom. In this work, a hybrid coordination environment was created for Fe-based single atom catalysts, comprising inorganic anchoring site from the support and organic ligands from the precursor. Using N,S co-doped graphene oxide as the support, Fe phthalocyanine was selectively anchored by the N/S sites, creating the unique N/S-Fe-N4 active sites as evidenced by extended X-ray absorption fine structure and Mössbauer spectrometry. Compared with other analogues with different metal centers or support, N/S-Fe-N4 showed much improved activity in oxygen reduction reaction, delivering onset and half-wave potentials of 1.02 and 0.94 V. This was superior over the state-of-the-art 20 wt % Pt/C and the classic Fe-N4 carbon catalysts. Density functional theory calculations revealed that the interaction between phthalocyanine ligands and heteroatom dopant from the support pushed electrons of Fe site to para-position, facilitating O2 adsorption and activation. This work shows the exciting opportunities of creating a hybrid coordination environment in single atom catalysts and paves a new avenue of improving their catalytic performance.
| S-EPMC9311226 | biostudies-literature
Project description:Chiral nitriles and their derivatives are prevalent in pharmaceuticals and bioactive compounds. Enantioselective alkene hydrocyanation represents a convenient and efficient approach for synthesizing these molecules. However, a generally applicable method featuring a broad substrate scope and high functional group tolerance remains elusive. Here, we address this long-standing synthetic problem using dual electrocatalysis. Using this strategy, we leverage electrochemistry to seamlessly combine two canonical radical reactions-cobalt-mediated hydrogen-atom transfer and copper-promoted radical cyanation-to accomplish highly enantioselective hydrocyanation without the need for stoichiometric oxidants. We also harness electrochemistry's unique feature of precise potential control to optimize the chemoselectivity of challenging substrates. Computational analysis uncovers the origin of enantio-induction, for which the chiral catalyst imparts a combination of attractive and repulsive non-covalent interactions to direct the enantio-determining C-CN bond formation. This work demonstrates the power of electrochemistry in accessing new chemical space and providing solutions to pertinent challenges in synthetic chemistry.
| S-EPMC7390704 | biostudies-literature
Project description:Improved oxygen electrocatalysis is crucial for the ever-growing energy demand. Metal-nitrogen-carbon (M-N-C) materials are promising candidates for catalysts. Their activity is tunable via varying electronic and geometric properties, such as porosity. Because of the difficulty in modeling porosity, M-N-Cs with variable surface curvature remained largely unexplored. In this work, we developed a realistic in-pore dual-atom site M-N-C model and applied density functional theory to investigate the surface curvature effect on oxygen reduction and evolution reactions. We show that surface curving tailors both scaling relations and energy barriers. Thus, we predict that adjusting the surface curvature can improve the catalytic activity toward mono- and bifunctional oxygen electrocatalysis.
| S-EPMC10013177 | biostudies-literature
Project description:For seeking high enantiopurity, the previously reported thermal asymmetric catalysis is usually carried out at low temperature sometimes with limited yield, that is, the high enantiomeric excess (ee) usually at the cost of high yield. Thus, the achieving both high stereoselectivity and yield is an enormous challenge. We report herein two metal nanoparticle (M NP)-loaded and porphyrin-containing homochiral covalent organic framework (CCOF)-based composite catalysts, and their application in the thermally-driven asymmetric one-pot Henry and A3-coupling reactions. All the reactions are conducted at elevated temperatures with both excellent stereoselectivity and yield which resulted from the synergy of CCOF confinement effect and M NP catalytic activation. Notably, the needed thermal energy for the asymmetric reactions herein is derived from the photothermal conversion via porphyrin-based CCOF upon irradiation with visible light. Remarkably, the CCOF confinement effect can be effectively maintained up to 100 °C for the asymmetric one-pot Henry and A3-coupling reactions herein.
| S-EPMC6662712 | biostudies-literature
Project description:Photocatalytic hydrogen production has been considered a promising approach to obtain green hydrogen energy. Crystalline porous materials have arisen as key photocatalysts for efficient hydrogen production. Here, we report a strategy to in situ photodeposit platinum clusters as cocatalyst on a covalent organic framework, which makes it an efficient photocatalyst for light-driven hydrogen evolution. Periodically dispersed adsorption sites of platinum species are constructed by introducing adjacent hydroxyl group and imine-N in the region of the covalent organic framework structural unit where photogenerated electrons converge, leading to the in situ reduction of the adsorbed platinum species into metal clusters by photogenerated electrons. The widespread platinum clusters on the covalent organic framework expose large active surface and greatly facilitate the electron transfer, finally contributing to a high photocatalytic hydrogen evolution rate of 42432 μmol g-1 h-1 at 1 wt% platinum loading. This work provides a direction for structural design on covalent organic frameworks to precisely manipulate cocatalyst morphologies and positions at the atomic level for developing efficient photocatalysts.
| S-EPMC8924255 | biostudies-literature