Dataset Information

Standardization of a CT Protocol for Imaging Patients with Suspected COVID-19-A RACOON Project.

ABSTRACT: CT protocols that diagnose COVID-19 vary in regard to the associated radiation exposure and the desired image quality (IQ). This study aims to evaluate CT protocols of hospitals participating in the RACOON (Radiological Cooperative Network) project, consolidating CT protocols to provide recommendations and strategies for future pandemics. In this retrospective study, CT acquisitions of COVID-19 patients scanned between March 2020 and October 2020 (RACOON phase 1) were included, and all non-contrast protocols were evaluated. For this purpose, CT protocol parameters, IQ ratings, radiation exposure (CTDI_vol), and central patient diameters were sampled. Eventually, the data from 14 sites and 534 CT acquisitions were analyzed. IQ was rated good for 81% of the evaluated examinations. Motion, beam-hardening artefacts, or image noise were reasons for a suboptimal IQ. The tube potential ranged between 80 and 140 kV_p, with the majority between 100 and 120 kV_p. CTDI_vol was 3.7 ± 3.4 mGy. Most healthcare facilities included did not have a specific non-contrast CT protocol. Furthermore, CT protocols for chest imaging varied in their settings and radiation exposure. In future, it will be necessary to make recommendations regarding the required IQ and protocol parameters for the majority of CT scanners to enable comparable IQ as well as radiation exposure for different sites but identical diagnostic questions.

SUBMITTER: Steuwe A

PROVIDER: S-EPMC10968361 | biostudies-literature | 2024 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Standardization of a CT Protocol for Imaging Patients with Suspected COVID-19-A RACOON Project.

Steuwe Andrea A Kamp Benedikt B Afat Saif S Akinina Alena A Aludin Schekeb S Bas Elif Gülsah EG Berger Josephine J Bohrer Evelyn E Brose Alexander A Büttner Susanne Martina SM Ehrengut Constantin C Gerwing Mirjam M Grosu Sergio S Gussew Alexander A Güttler Felix F Heinrich Andreas A Jiraskova Petra P Kloth Christopher C Kottlors Jonathan J Kuennemann Marc-David MD Liska Christian C Lubina Nora N Manzke Mathias M Meinel Felix G FG Meyer Hans-Jonas HJ Mittermeier Andreas A Persigehl Thorsten T Schmill Lars-Patrick LP Steinhardt Manuel M The Racoon Study Group Antoch Gerald G Valentin Birte B

Bioengineering (Basel, Switzerland) 20240222 3

CT protocols that diagnose COVID-19 vary in regard to the associated radiation exposure and the desired image quality (IQ). This study aims to evaluate CT protocols of hospitals participating in the RACOON (Radiological Cooperative Network) project, consolidating CT protocols to provide recommendations and strategies for future pandemics. In this retrospective study, CT acquisitions of COVID-19 patients scanned between March 2020 and October 2020 (RACOON phase 1) were included, and all non-contr ...[more]

PMID: 38534481

Similar Datasets

Project description:ObjectivesCOVID-19 and Non-Covid-19 (NC) Pneumonia encountered high CT imaging overlaps during pandemic. The study aims to evaluate the effectiveness of image-based quantitative CT features in discriminating COVID-19 from NC Pneumonia.Materials and methods145 patients with highly suspected COVID-19 were retrospectively enrolled from four centers in Sichuan Province during January 23 to March 23, 2020. 88 cases were confirmed as COVID-19, and 57 patients were NC. The dataset was randomly divided by 3:2 into training and testing sets. The quantitative CT radiomics features were extracted and screened sequentially by correlation analysis, Mann-Whitney U test, the least absolute shrinkage and selection operator (LASSO) logistic regression (LR) and backward stepwise LR with minimum AIC methods. The selected features were used to construct the LR model for differentiating COVID-19 from NC. Meanwhile, the differentiation performance of traditional quantitative CT features such as lesion volume ratio, ground glass opacity (GGO) or consolidation volume ratio were also considered and compared with Radiomics-based method. The receiver operating characteristic curve (ROC) analysis were conducted to evaluate the predicting performance.ResultsCompared with traditional CT quantitative features, radiomics features performed best with the highest Area Under Curve (AUC), sensitivity, specificity and accuracy in the training (0.994, 0.942, 1.0 and 0.965) and testing sets (0.977, 0.944, 0.870, 0.915) (Delong test, P < 0.001). Among CT volume-ratio based models using lesion or GGO component ratio, the model combining CT lesion score and component ratio performed better than others, with the AUC, sensitivity, specificity and accuracy of 0.84, 0.692, 0.853, 0.756 in the training set and 0.779, 0.667, 0.826, 0.729 in the testing set. The significant difference of the most selected wavelet transformed radiomics features between COVID-19 and NC might well reflect the CT signs.ConclusionsThe differentiation between COVID-19 and NC could be well improved by using radiomics features, compared with traditional CT quantitative values.

Project description:BackgroundCorona Virus Disease 2019 (COVID-19) is currently a worldwide pandemic and has a huge impact on public health and socio-economic development. The purpose of this study is to explore the diagnostic value of the quantitative computed tomography (CT) method by using different threshold segmentation techniques to distinguish between patients with or without COVID-19 pneumonia.MethodsA total of 47 patients with suspected COVID-19 were retrospectively analyzed, including nine patients with positive real-time fluorescence reverse transcription polymerase chain reaction (RT-PCR) test (confirmed case group) and 38 patients with negative RT-PCR test (excluded case group). An improved 3D convolutional neural network (VB-Net) was used to automatically extract lung lesions. Eight different threshold segmentation methods were used to define the ground glass opacity (GGO) and consolidation. The receiver operating characteristic (ROC) curves were used to compare the performance of various parameters with different thresholds for diagnosing COVID-19 pneumonia.ResultsThe volume of GGO (VOGGO) and GGO percentage in the whole lung (GGOPITWL) were the most effective values for diagnosing COVID-19 at a threshold of - 300 HU, with areas under the curve (AUCs) of 0.769 and 0.769, sensitivity of 66.67 and 66.67%, specificity of 94.74 and 86.84%. Compared with VOGGO or GGOPITWL at a threshold of - 300 Hounsfield units (HU), the consolidation percentage in the whole lung (CPITWL) with thresholds at - 400 HU, - 350 HU, and - 250 HU were statistically different. There were statistical differences in the infection volume and percentage of the whole lung, right lung, and lobes between the two groups. VOGGO, GGOPITWL, and volume of consolidation (VOC) were also statistically different at the threshold of - 300 HU.ConclusionsQuantitative CT provides an image quantification method for the auxiliary diagnosis of COVID-19 and is expected to assist in confirming patients with COVID-19 pneumonia in suspected cases.

Project description:Background There are conflicting data regarding the diagnostic performance of chest CT for COVID-19 pneumonia. Disease extent at CT has been reported to influence prognosis. Purpose To create a large publicly available data set and assess the diagnostic and prognostic value of CT in COVID-19 pneumonia. Materials and Methods This multicenter, observational, retrospective cohort study involved 20 French university hospitals. Eligible patients presented at the emergency departments of the hospitals involved between March 1 and April 30th, 2020, and underwent both thoracic CT and reverse transcription-polymerase chain reaction (RT-PCR) testing for suspected COVID-19 pneumonia. CT images were read blinded to initial reports, RT-PCR, demographic characteristics, clinical symptoms, and outcome. Readers classified CT scans as either positive or negative for COVID-19 based on criteria published by the French Society of Radiology. Multivariable logistic regression was used to develop a model predicting severe outcome (intubation or death) at 1-month follow-up in patients positive for both RT-PCR and CT, using clinical and radiologic features. Results Among 10 930 patients screened for eligibility, 10 735 (median age, 65 years; interquartile range, 51-77 years; 6147 men) were included and 6448 (60%) had a positive RT-PCR result. With RT-PCR as reference, the sensitivity and specificity of CT were 80.2% (95% CI: 79.3, 81.2) and 79.7% (95% CI: 78.5, 80.9), respectively, with strong agreement between junior and senior radiologists (Gwet AC1 coefficient, 0.79). Of all the variables analyzed, the extent of pneumonia at CT (odds ratio, 3.25; 95% CI: 2.71, 3.89) was the best predictor of severe outcome at 1 month. A score based solely on clinical variables predicted a severe outcome with an area under the curve of 0.64 (95% CI: 0.62, 0.66), improving to 0.69 (95% CI: 0.6, 0.71) when it also included the extent of pneumonia and coronary calcium score at CT. Conclusion Using predefined criteria, CT reading is not influenced by reader's experience and helps predict the outcome at 1 month. ClinicalTrials.gov identifier: NCT04355507 Published under a CC BY 4.0 license. Online supplemental material is available for this article. See also the editorial by Rubin in this issue.

Project description:ObjectivesThe current study aimed to design an ultra-low-dose CT examination protocol using a deep learning approach suitable for clinical diagnosis of COVID-19 patients.MethodsIn this study, 800, 170, and 171 pairs of ultra-low-dose and full-dose CT images were used as input/output as training, test, and external validation set, respectively, to implement the full-dose prediction technique. A residual convolutional neural network was applied to generate full-dose from ultra-low-dose CT images. The quality of predicted CT images was assessed using root mean square error (RMSE), structural similarity index (SSIM), and peak signal-to-noise ratio (PSNR). Scores ranging from 1 to 5 were assigned reflecting subjective assessment of image quality and related COVID-19 features, including ground glass opacities (GGO), crazy paving (CP), consolidation (CS), nodular infiltrates (NI), bronchovascular thickening (BVT), and pleural effusion (PE).ResultsThe radiation dose in terms of CT dose index (CTDIvol) was reduced by up to 89%. The RMSE decreased from 0.16 ± 0.05 to 0.09 ± 0.02 and from 0.16 ± 0.06 to 0.08 ± 0.02 for the predicted compared with ultra-low-dose CT images in the test and external validation set, respectively. The overall scoring assigned by radiologists showed an acceptance rate of 4.72 ± 0.57 out of 5 for reference full-dose CT images, while ultra-low-dose CT images rated 2.78 ± 0.9. The predicted CT images using the deep learning algorithm achieved a score of 4.42 ± 0.8.ConclusionsThe results demonstrated that the deep learning algorithm is capable of predicting standard full-dose CT images with acceptable quality for the clinical diagnosis of COVID-19 positive patients with substantial radiation dose reduction.Key points• Ultra-low-dose CT imaging of COVID-19 patients would result in the loss of critical information about lesion types, which could potentially affect clinical diagnosis. • Deep learning-based prediction of full-dose from ultra-low-dose CT images for the diagnosis of COVID-19 could reduce the radiation dose by up to 89%. • Deep learning algorithms failed to recover the correct lesion structure/density for a number of patients considered outliers, and as such, further research and development is warranted to address these limitations.

Dataset Information

Standardization of a CT Protocol for Imaging Patients with Suspected COVID-19-A RACOON Project.

Publications

Standardization of a CT Protocol for Imaging Patients with Suspected COVID-19-A RACOON Project.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets