Nanoliposomes Permeability in a Microfluidic Drug Delivery Platform across a 3D Hydrogel
Ontology highlight
ABSTRACT:
SUBMITTER: Peyret C
PROVIDER: S-EPMC11207390 | biostudies-literature | 2024 Jun
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Conventional high-throughput screening (HTS) platforms suffer from the need for large cell volumes, high reagent consumption, significant assembly cost, and handling efforts. The assembly of three-dimensional (3D) bioprinted hydrogel-based microfluidic chips within platforms can address these problems. We present a continuous and seamless manufacturing approach to create a bioprinted microfluidic chips with a circular pattern scalable toward HTS platforms. Digital light processing 3D bioprinting is used to tune the local permeability of our chip, made of polyethylene glycol diacrylate and cell-laden gelatin methacryloyl, for creating predefined gradients of biochemical properties. We measured the flow-induced physical characteristics, the mass transport of drug agents, and the biological features of the proposed chip. We measured reactive oxygen species from the encapsulated cells through an integrated process and showed the capacity of the hydrogel-based chip for creating drug/agent gradients. This work introduces a chip design based on a hydrogel that can be changed and could be used for modern HTS platforms such as in vitro organoids.
| S-EPMC11375967 | biostudies-literature
Project description:An endothelial-lined blood vessel model is obtained in a PDMS (Polydimethylsiloxane) microfluidic system, where vascular endothelial cells are grown under physiological shear stress, allowing -like maturation. This experimental model is employed for enhanced drug delivery studies, aimed at characterising the increase in endothelial permeability upon microbubble-enhanced ultrasound-induced (USMB) cavitation. We developed a multi-step protocol to couple the optical and the acoustic set-ups, thanks to a 3D-printed insonation chamber, provided with direct optical access and a support for the US transducer. Cavitation-induced interendothelial gap opening is then analysed using a customised code that quantifies gap area and the relative statistics. We show that exposure to US in presence of microbubbles significantly increases endothelial permeability and that tissue integrity completely recovers within 45 min upon insonation. This protocol, along with the versatility of the microfluidic platform, allows to quantitatively characterise cavitation-induced events for its potential employment in clinics.
| S-EPMC8229805 | biostudies-literature
Project description:Patient-derived xenografts (PDX), generated when resected patient tumor tissue is engrafted directly into immunocompromised mice, remain biologically stable, thereby preserving molecular, genetic, and histological features, as well as heterogeneity of the original tumor. However, using these models to perform a multitude of experiments, including drug screening, is prohibitive both in terms of cost and time. Three-dimensional (3D) culture systems are widely viewed as platforms in which cancer cells retain their biological integrity through biochemical interactions, morphology, and architecture. Our team has extensive experience culturing PDX cells in vitro using 3D matrices composed of hyaluronic acid (HA). In order to separate mouse fibroblast stromal cells associated with PDXs, we use rotation culture, where stromal cells adhere to the surface of tissue culture-treated plates while dissociated PDX tumor cells float and self-associate into multicellular clusters. Also floating in the supernatant are single, often dead cells, which present a challenge in collecting viable PDX clusters for downstream encapsulation into hydrogels for 3D cell culture. In order to separate these single cells from live cell clusters, we have employed density step gradient centrifugation. The protocol described here allows for the depletion of non-viable single cells from the healthy population of cell clusters that will be used for further in vitro experimentation. In our studies, we incorporate the 3D cultures in microfluidic plates which allow for media perfusion during culture. After assessing the resultant cultures using a fluorescent image-based viability assay of purified versus non-purified cells, our results show that this additional separation step substantially reduced the number of non-viable cells from our cultures.
| S-EPMC9250080 | biostudies-literature
Project description:Phospholipid-based deformable nanovesicles (DNVs) that have flexibility in shape offer an adaptable and facile method to encapsulate diverse classes of therapeutics and facilitate localized transdermal delivery while minimizing systemic exposure. Here we report the use of a microfluidic reactor for the synthesis of DNVs and show that alteration of input parameters such as flow speeds as well as molar and flow rate ratios increases entrapment efficiency of drugs and allows fine-tuning of DNV size, elasticity, and surface charge. To determine the ability of DNV-encapsulated drug to be delivered transdermally to a local site, we synthesized, characterized, and tested DNVs carrying the fluorescently labeled hydrophilic bisphosphonate drug AF-647 zoledronate (AF647-Zol). AF647-Zol DNVs were lyophilized, resuspended, and applied topically as a paste to the calvarial skin of mice. High-resolution fluorescent imaging and confocal microscopy revealed significant increase of encapsulated payload delivery to the target tissue-cranial bone-by DNVs as compared to nondeformable nanovesicles (NVs) or aqueous drug solutions. Interestingly, NV delivery was not superior to aqueous drug solution. Our studies show that microfluidic reactor-synthesized DNVs can be produced in good yield, with high encapsulation efficiency, reproducibility, and stability after storage, and represent a useful vehicle for localized transdermal drug delivery.
| S-EPMC5396447 | biostudies-literature
Project description:The objective of this study was to develop a novel hybrid genipin-crosslinked dual-sensitive hydrogel/nanostructured lipid carrier (NLC) drug delivery platform. An ophthalmic anti-inflammatory drug, baicalin (BN) was chosen as the model drug. BN-NLC was prepared using melt-emulsification combined with ultra-sonication technique. Additionally, a dual pH- and thermo-sensitive hydrogel composed of carboxymethyl chitosan (CMCS) and poloxamer 407 (F127) was fabricated by a cross-linking reaction with a nontoxic crosslinker genipin (GP). GP-CMCS/F127 hydrogel was characterized by FTIR, NMR, XRD and SEM. The swelling studies showed GP-CMCS/F127 hydrogel was both pH- and thermo-sensitive. The results of in vitro release suggested BN-NLC gel can prolong the release of baicalin comparing with BN eye drops and BN-NLC. Ex vivo cornea permeation study was evaluated using Franz diffusion cells. The apparent permeability coefficient (Papp ) of BN-NLC gel was much higher (4.46-fold) than that of BN eye drops. Through the determination of corneal hydration levels, BN-NLC gel was confirmed that had no significant irritation to cornea. Ex vivo precorneal retention experiments were carried out by a flow-through approach. The results indicated that the NLC-based hydrogel can prolong precorneal residence time. In conclusion, the hybrid NLC-based hydrogel has a promising potential for application in ocular drug delivery.
| S-EPMC7032125 | biostudies-literature
Project description:Nanomedicine is a growing research field dealing with the creation and manipulation of materials at a nanometer scale for the better treatment, diagnosis and imaging of diseases. In cancer medicine, the use of nanoparticles as drug delivery systems has advanced the bioavailability, in vivo stability, intestinal absorption, solubility, sustained and targeted delivery, and therapeutic effectiveness of several anticancer agents. The expansion of novel nanoparticles for drug delivery is an exciting and challenging research filed, in particular for the delivery of emerging cancer therapies, including small interference RNA (siRNA) and microRNA (miRNAs)-based molecules. In this review, we focus on the currently available drug delivery systems for anticancer agents. In addition, we will discuss the promising use of nanoparticles for novel cancer treatment strategies.
| S-EPMC3854016 | biostudies-other
Project description:Intracellular delivery of macromolecules is a challenge in research and therapeutic applications. Existing vector-based and physical methods have limitations, including their reliance on exogenous materials or electrical fields, which can lead to toxicity or off-target effects. We describe a microfluidic approach to delivery in which cells are mechanically deformed as they pass through a constriction 30-80% smaller than the cell diameter. The resulting controlled application of compression and shear forces results in the formation of transient holes that enable the diffusion of material from the surrounding buffer into the cytosol. The method has demonstrated the ability to deliver a range of material, such as carbon nanotubes, proteins, and siRNA, to 11 cell types, including embryonic stem cells and immune cells. When used for the delivery of transcription factors, the microfluidic devices produced a 10-fold improvement in colony formation relative to electroporation and cell-penetrating peptides. Indeed, its ability to deliver structurally diverse materials and its applicability to difficult-to-transfect primary cells indicate that this method could potentially enable many research and clinical applications.
| S-EPMC3568376 | biostudies-literature
Project description:The development of organs-on-a-chip has resulted in advances in the reconstruction of 3D cellular microenvironments. However, there remain limitations regarding applicability and manufacturability. Here, we present an injection-molded plastic array 3D universal culture platform (U-IMPACT) for various biological applications in a single platform, such as cocultures of various cell types, and spheroids (e.g., tumor spheroids, neurospheres) and tissues (e.g., microvessels). The U-IMPACT consists of three channels and a spheroid zone with a 96-well plate form factor. Specifically, organoids or spheroids (~500 μm) can be located in designated areas, while cell suspensions or cell-laden hydrogels can be selectively placed in three channels. For stable multichannel patterning, we developed a new patterning method based on capillary action, utilizing capillary channels and the native contact angle of the materials without any modification. We derived the optimal material hydrophilicity (contact angle of the body, 45–90°; substrate, <30°) for robust patterning through experiments and theoretical calculations. We demonstrated that the U-IMPACT can implement 3D tumor microenvironments for angiogenesis, vascularization, and tumor cell migration. Furthermore, we cultured neurospheres from induced neural stem cells. The U-IMPACT can serve as a multifunctional organ-on-a-chip platform for high-content and high-throughput screening.
| S-EPMC9719897 | biostudies-literature
Project description:Hydrogels are being extensively used for three-dimensional immobilization and culture of cells in fundamental biological studies, biochemical processes, and clinical treatments. However, it is still a challenge to support viability and regulate phenotypic activities of cells in a structurally stable gel, because the gel becomes less permeable with increasing rigidity. To resolve this challenge, this study demonstrates a unique method to enhance the permeability of a cell-laden hydrogel while avoiding a significant change in rigidity of the gel. Inspired by the grooved skin textures of marine organisms, a hydrogel is assembled to present computationally optimized micro-sized grooves on the surface. Separately, a gel is engineered to preset aligned microchannels similar to a plant's vascular bundles through a uniaxial freeze-drying process. The resulting gel displays significantly increased water diffusivity with reduced changes of gel stiffness, exclusively when the microgrooves and microchannels are aligned together. No significant enhancement of rehydration is achieved when the microgrooves and microchannels are not aligned. Such material design greatly enhances viability and neural differentiation of stem cells and 3D neural network formation within the gel.
| S-EPMC4353999 | biostudies-literature
Project description:BackgroundLiposome particles with smaller sizes could increase transdermal drug delivery efficacy for enhanced skin penetration. While microfluidic methods have enabled controlled liposome synthesis, achieving efficient production of ultrasmall nanoliposomes (NLPUS) with a size smaller than 40 nm yet remains an unmet challenge.MethodsIn this study, we employed a helical-blade-strengthened co-flow focusing (HBSCF) device to efficiently synthesize NLPUS, which demonstrated superior skin permeation and retention.ResultsLiposome formulation primarily contains unsaturated lecithin, which endows an unprecedented capacity to NLPUS to scavenge reactive oxygen species (ROS). Moreover, NLPUS can effectively encapsulate a broad spectrum of anti-aging agents, including coenzyme Q10 (CoQ10), while preserving its physical properties. In a photoaged skin model, topical application of CoQ10-loaded NLPUS (CoQ10@NLPUS) inhibited ultraviolet B (UVB)-induced matrix metalloproteinase-1 (MMP-1) production, and promoted collagen type I (Col-I) synthesis in skin cells, thereby effectively rejuvenating the photoaged skin.ConclusionsThis study presents a straightforward and efficient method for the production of NLPUS, thereby offering a promising platform for transdermal delivery of diverse therapeutic agents.
| S-EPMC11853437 | biostudies-literature