Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Ultrasmall InGa(As)P Dielectric and Plasmonic Nanolasers.

ABSTRACT: Nanolasers have great potential for both on-chip light sources and optical barcoding particles. We demonstrate ultrasmall InGaP and InGaAsP disk lasers with diameters down to 360 nm (198 nm in height) in the red spectral range. Optically pumped, room-temperature, single-mode lasing was achieved from both disk-on-pillar and isolated particles. When isolated disks were placed on gold, plasmon polariton lasing was obtained with Purcell-enhanced stimulated emission. UV lithography and plasma ashing enabled wafer-scale fabrication of nanodisks with an intended random size variation. Silica-coated nanodisk particles generated stable subnanometer spectra from within biological cells across an 80 nm bandwidth from 635 to 715 nm.

SUBMITTER: Sarkar D

PROVIDER: S-EPMC11229223 | biostudies-literature | 2023 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Ultrasmall InGa(As)P Dielectric and Plasmonic Nanolasers.

Sarkar Debarghya D Cho Sangyeon S Yan Hao H Martino Nicola N Dannenberg Paul H PH Yun Seok Hyun SH

ACS nano 20230731 16

Nanolasers have great potential for both on-chip light sources and optical barcoding particles. We demonstrate ultrasmall InGaP and InGaAsP disk lasers with diameters down to 360 nm (198 nm in height) in the red spectral range. Optically pumped, room-temperature, single-mode lasing was achieved from both disk-on-pillar and isolated particles. When isolated disks were placed on gold, plasmon polariton lasing was obtained with Purcell-enhanced stimulated emission. UV lithography and plasma ashing ...[more]

PMID: 37523588

Similar Datasets

Plasmonic Hinge Modes in Metal-Coated Nanolasers.

Project description:Plasmonic lasers have traditionally been built on flat metal substrates. Here, we introduce substrate-free plasmonic lasers created by coating semiconductor particles with an optically thin layer of noble metal. This architecture supports plasmonic "hinge" modes highly localized along the particle's edges and corners, exhibiting Purcell factors exceeding 100 and Q-factors of 15-20 near the plasmon resonance frequency. We demonstrate hinge-mode lasing in submicron CsPbBr3 perovskite cubes encapsulated with conformal 15-nm-thick gold shells. The lasing is achieved with 480-nm nanosecond pumping at 10 pJ/μm2 through the translucent gold layer, producing a line width of 0.6 at 538 nm. Their rapidly decaying evanescent fields outside the gold coating show distinct sensitivities to long- and short-range external perturbations. Our results suggest the potential of these novel laser modes for sensing and imaging applications.

| S-EPMC11528437 | biostudies-literature

Single-crystalline aluminum film for ultraviolet plasmonic nanolasers.

Project description:Significant advances have been made in the development of plasmonic devices in the past decade. Plasmonic nanolasers, which display interesting properties, have come to play an important role in biomedicine, chemical sensors, information technology, and optical integrated circuits. However, nanoscale plasmonic devices, particularly those operating in the ultraviolet regime, are extremely sensitive to the metal and interface quality. Thus, these factors have a significant bearing on the development of ultraviolet plasmonic devices. Here, by addressing these material-related issues, we demonstrate a low-threshold, high-characteristic-temperature metal-oxide-semiconductor ZnO nanolaser that operates at room temperature. The template for the ZnO nanowires consists of a flat single-crystalline Al film grown by molecular beam epitaxy and an ultrasmooth Al2O3 spacer layer synthesized by atomic layer deposition. By effectively reducing the surface plasmon scattering and metal intrinsic absorption losses, the high-quality metal film and the sharp interfaces formed between the layers boost the device performance. This work should pave the way for the use of ultraviolet plasmonic nanolasers and related devices in a wider range of applications.

| S-EPMC4728607 | biostudies-literature

Surface roughness effects on aluminium-based ultraviolet plasmonic nanolasers.

Project description:We systematically investigate the effects of surface roughness on the characteristics of ultraviolet zinc oxide plasmonic nanolasers fabricated on aluminium films with two different degrees of surface roughness. We demonstrate that the effective dielectric functions of aluminium interfaces with distinct roughness can be analysed from reflectivity measurements. By considering the scattering losses, including Rayleigh scattering, electron scattering, and grain boundary scattering, we adopt the modified Drude-Lorentz model to describe the scattering effect caused by surface roughness and obtain the effective dielectric functions of different Al samples. The sample with higher surface roughness induces more electron scattering and light scattering for SPP modes, leading to a higher threshold gain for the plasmonic nanolaser. By considering the pumping efficiency, our theoretical analysis shows that diminishing the detrimental optical losses caused by the roughness of the metallic interface could effectively lower (~33.1%) the pumping threshold of the plasmonic nanolasers, which is consistent with the experimental results.

| S-EPMC5206644 | biostudies-literature

Unusual scaling laws for plasmonic nanolasers beyond the diffraction limit.

Project description:Plasmonic nanolasers are a new class of amplifiers that generate coherent light well below the diffraction barrier bringing fundamentally new capabilities to biochemical sensing, super-resolution imaging, and on-chip optical communication. However, a debate about whether metals can enhance the performance of lasers has persisted due to the unavoidable fact that metallic absorption intrinsically scales with field confinement. Here, we report plasmonic nanolasers with extremely low thresholds on the order of 10 kW cm-2 at room temperature, which are comparable to those found in modern laser diodes. More importantly, we find unusual scaling laws allowing plasmonic lasers to be more compact and faster with lower threshold and power consumption than photonic lasers when the cavity size approaches or surpasses the diffraction limit. This clarifies the long-standing debate over the viability of metal confinement and feedback strategies in laser technology and identifies situations where plasmonic lasers can have clear practical advantage.

| S-EPMC5709497 | biostudies-literature

On-Chip Monolithically Integrated Ultraviolet Low-Threshold Plasmonic Metal-Semiconductor Heterojunction Nanolasers.

Project description:The metal-semiconductor heterojunction is imperative for the realization of electrically driven nanolasers for chip-level platforms. Progress in developing such nanolasers has hitherto rarely been realized, however, because of their complexity in heterojunction fabrication and the need to use noble metals that are incompatible with microelectronic manufacturing. Most plasmonic nanolasers lase either above a high threshold (101 -103 MW cm-2 ) or at a cryogenic temperature, and lasing is possible only after they are removed from the substrate to avoid the large ohmic loss and the low modal reflectivity, making monolithic fabrication impossible. Here, for the first time, record-low-threshold, room-temperature ultraviolet (UV) lasing of plasmon-coupled core-shell nanowires that are directly grown on silicon is demonstrated. The naturally formed core-shell metal-semiconductor heterostructure of the nanowires leads to a 100-fold improvement in growth density over previous results. This unprecedentedly high nanowire density creates intense plasmonic resonance, which is outcoupled to the resonant Fabry-Pérot microcavity. By boosting the emission strength by a factor of 100, the hybrid photonic-plasmonic system successfully facilitates a record-low laser threshold of 12 kW cm-2 with a spontaneous emission coupling factor as high as ≈0.32 in the 340-360 nm range. Such architecture is simple and cost-competitive for future UV sources in silicon integration.

| S-EPMC10558691 | biostudies-literature

Current Modulation of Plasmonic Nanolasers by Breaking Reciprocity on Hybrid Graphene-Insulator-Metal Platforms.

Project description:A hybrid graphene-insulator-metal (GIM) platform is proposed with a supported surface plasmon polariton (SPP) wave that can be manipulated by breaking Lorentz reciprocity. The ZnO SPP nanowire lasers on the GIM platforms are demonstrated up to room temperature to be actively modulated by applying external current to graphene, which transforms the cavity mode from the standing to propagation wave pattern. With applying 100 mA external current, the laser threshold increases by ≈100% and a 1.2 nm Doppler shift is observed due to the nonreciprocal propagation characteristic. The nanolaser performance also depends on the orientation of the nanowire with respect to the current flow direction. The GIM platform can be a promising platform for integrated plasmonic system functioning laser generation, modulation, and detection.

| S-EPMC7740083 | biostudies-literature

Functional optical design of thickness-optimized transparent conductive dielectric-metal-dielectric plasmonic structure.

Project description:Dielectric/metal/dielectric plasmonic transparent structures play an important role in tailoring the high-optical performance of various optoelectronic devices. Though these structures are in significant demand in applications, including modification of the optical properties, average visible transmittance (AVT) and colour render index (CRI) and correlated colour temperature (CCT), obtaining optimal ones require precise thickness optimization. The overall objective of this study is the estimation of the optimal design concept of MoO3/Ag/WO3 (10/dAg/dWO3 nm) plasmonic structure. To explore the proper use in optoelectronic devices, we are motivated to conduct a rigorous optical evaluation on the thickness of layers. Having calculated optical characteristics and achieved the highest AVT of 97.3% for dAg = 4 nm and dWO3 = 6 nm by the transfer matrix method, it is quite possible to offer the potential of the structure acting as a transparent contact. Notably, the colour coordinates of the structure are x = 0.3110 and y = 0.3271, namely, it attributes very close to the Planckian locus. This superior colour performance displays that MoO3/Ag/WO3 shall undergo rapid development in neutral-colour windows and LED technologies. Structure with dAg = 6 nm and dWO3 = 16 nm exhibits the highest CRI of 98.58, thus identifying an optimal structure that can be integrated into LED lighting applications and imaging technologies. Besides the colour of structure with dAg = 4 nm and dWO3 = 8 nm is equal for D65 Standard Illuminant, the study reports that the range of CCTs are between 5000 and 6500 K. This optimization makes the structure employable as a near-daylight broadband illuminant. The study emphasizes that optimal MoO3/Ag/WO3 plasmonic structures can be used effectively to boost optoelectronic devices' performance.

| S-EPMC9132950 | biostudies-literature

Molecular chirality detection using plasmonic and dielectric nanoparticles.

Project description:Nanoscale particles and structures hold promise in circular dichroism (CD) spectroscopy for overcoming the weakness of molecular CD signals. Significant effort have been made to characterize nanophotonic CD enhancement and find efficient ways to boost molecular chirality, but the best solution is yet to be found. In this paper, we present a rigorous analytic study of the nanophotonic CD enhancement of typical nanoparticles. We consider metallic and dielectric nanoparticles capped with chiral molecules and analyze the effect of multipolar nanoparticles on the molecular CD. We identify the spectral features of the molecular CD resulting from the electric and magnetic resonances of nanoparticles and suggest better ways to boost molecular chirality. We also clarify the contribution of particle scattering and absorption to the molecular CD and the dependence on particle size. Our work provides an exact analytic approach to nanophotonic CD enhancement and offers a rule for selecting the most efficient particle for sensitive molecular chirality detection.

| S-EPMC11502060 | biostudies-literature

Ultrasmall and tunable TeraHertz surface plasmon cavities at the ultimate plasmonic limit.

Project description:The ability to confine THz photons inside deep-subwavelength cavities promises a transformative impact for THz light engineering with metamaterials and for realizing ultrastrong light-matter coupling at the single emitter level. To that end, the most successful approach taken so far has relied on cavity architectures based on metals, for their ability to constrain the spread of electromagnetic fields and tailor geometrically their resonant behavior. Here, we experimentally demonstrate a comparatively high level of confinement by exploiting a plasmonic mechanism based on localized THz surface plasmon modes in bulk semiconductors. We achieve plasmonic confinement at around 1 THz into record breaking small footprint THz cavities exhibiting mode volumes as low as [Formula: see text], excellent coupling efficiencies and a large frequency tunability with temperature. Notably, we find that plasmonic-based THz cavities can operate until the emergence of electromagnetic nonlocality and Landau damping, which together constitute a fundamental limit to plasmonic confinement. This work discloses nonlocal plasmonic phenomena at unprecedentedly low frequencies and large spatial scales and opens the door to novel types of ultrastrong light-matter interaction experiments thanks to the plasmonic tunability.

| S-EPMC10667513 | biostudies-literature

Tuning Fluorescence Direction with Plasmonic Metal-Dielectric- Metal Substrates.

Project description:Controlling the emission properties of fluorophores is essential for improving the performance of fluorescence-based techniques in modern biochemical research, medical diagnosis, and sensing. Fluorescence emission is isotropic in nature, which makes it difficult to capture more than a small fraction of the total emission. Metal- dielectric-metal (MDM) substrates, discussed in this Letter, convert isotropic fluorescence into beaming emission normal to the substrate. This improves fluorescence collection efficiency and also opens up new avenues for a wide range of fluorescence-based applications. We suggest that MDM substrates can be readily adapted for multiple uses, such as in microarray formats, for directional fluorescence studies of multiple probes or for molecule-specific sensing with a high degree of spatial control over the fluorescence emission.SectionPhysical Processes in Nanomaterials and Nanostructures.

| S-EPMC3762509 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data