Effects of Defatting Pretreatment on Polysaccharide Extraction from Rambutan Seeds Using Subcritical Water: Optimization Using the Desirability Approach
Ontology highlight
ABSTRACT:
SUBMITTER: Nilmat K
PROVIDER: S-EPMC11241141 | biostudies-literature | 2024 Jun
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Subcritical water extraction (SWE) uses hot compressed water as an effective solvent for both polar and nonpolar compounds and has been developed as an environmentally benign extraction technology for natural materials. Polysaccharides as one of the main ingredients in Dendrobium plants showed obvious biological activity. Thus, SWE of polysaccharides obtained from Dendrobium nobile Lindl. was investigated in this work. The response surface methodology (RSM) was combined with a Box-Behnken design to evaluate the influence that the three independent variables had on the response. The optimal extraction conditions (determined via RSM) were 129.83 °C extraction temperature, 16.71 min extraction time, and 1.12 MPa extraction pressure. The maximum predicted polysaccharide yield was 20.67%, which corresponded well with the experiential extraction (21.88%). The polysaccharides obtained from either the stirring extraction, refluxing extraction, ultrasound extraction, or SWE methods were compared, and the extraction processes were modeled. The molecular weight, monosaccharide composition, and antioxidative activities of the polysaccharides were analyzed.
| S-EPMC6906767 | biostudies-literature
Project description:Persimmon peel pectin (PPP) was extracted by subcritical water via the response surface methodology. The optimal crude PPP extraction yield of 7.62 ± 0.7 % was found at 138 °C, 2.84 min, and liquid-solid ratio of 1:10.02. After treatment of deproteinization and decolorization with papain and hydrogen peroxide, 83.19 % of protein and 78.56 % of the colour in crude PPP were removed, respectively. PPP owned the Mw of 21.79 kDa and its uronic acids content was 64.03 %. PPP was further affirmed by fourier transform infrared, X-ray diffractometer and 1H NMR analysis. Moreover, the degradation temperature (228.05 ℃) of PPP was verified via differential scanning calorimetry. Then, the IC50 of PPP to ABTS•+ was 9.8 times that of commercial citrus pectin. Moreover, PPP could change microbial communities and selectively enrich Bacteroides, Cetobacterium, Erysipelatoclostridium, Parabacteroides and Phocaeicola sartorii. This study demonstrated that subcritical water was practicable for extraction of persimmon peel pectin.
| S-EPMC9593855 | biostudies-literature
Project description: Not available
| S-EPMC10665808 | biostudies-literature
Project description:BackgroundRecent studies of lipid extraction from microalgae have focused primarily on dewatered or dried samples, and the processes are simple with high lipid yield. Yet, the dewatering with drying step is energy intensive, which makes the energy input during the lipid production more than energy output from obtained lipid. Thus, exploring an extraction technique for just a thickened sample without the dewatering, drying and auxiliary operation (such as cell disruption) is very significant. Whereas lipid extraction from the thickened microalgae is complicated by the high water content involved, and traditional solvent, hence, cannot work well. Dimethyl ether (DME), a green solvent, featuring a high affinity for both water and organic compounds with an ability to penetrate the cell walls has the potential to achieve this goal.ResultsThis study investigated an energy-saving method for lipid extraction using DME as the solvent with an entrainer solution (ethanol and acetone) for flocculation-thickened microalgae. Extraction efficiency was evaluated in terms of extraction time, DME dosage, entrainer dosage, and ethanol:acetone ratio. Optimal extraction occurred after 30 min using 4.2 mL DME per 1 mL microalgae, with an entrainer dosage of 8% at 1:2 ethanol:acetone. Raw lipid yields and its lipid component (represented by fatty acid methyl ester) contents were compared against those of common extraction methods (Bligh and Dryer, and Soxhlet). Thermal gravimetry/differential thermal analysis, Fourier-transform infrared spectroscopy, and C/H/N elemental analyses were used to examine differences in lipids extracted using each of the evaluated methods. Considering influence of trace metals on biodiesel utilization, inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectroscopy analyses were used to quantify trace metals in the extracted raw lipids, which revealed relatively high concentrations of Mg, Na, K, and Fe.ConclusionsOur DME-based method recovered 26.4% of total raw lipids and 54.4% of total fatty acid methyl esters at first extraction with remnants being recovered by a 2nd extraction. In additional, the DME-based approach was more economical than other methods, because it enabled simultaneous dewatering with lipid extraction and no cell disruption was required. The trace metals of raw lipids indicated a purification demand in subsequent refining process.
| S-EPMC7797121 | biostudies-literature
Project description:Optimization of prosthetic joint infection sample DNA extraction for Nanopore sequencing
| PRJEB42910 | ENA
Project description:Microalgae are a promising source of omega-3. The purpose of this study was to extract lipid with a relatively high content of eicosapentaenoic acid (EPA) from Nannochloropsis gaditana using subcritical water extraction (SWE). The effects of different temperatures (156.1-273.9°C), extraction times (6.6-23.4 minutes), and biomass loadings (33-117 g algae/L) on the extraction yield were studied. From the optimization study using central composite design (CCD), quadratic models generated for lipid yield and EPA composition were considered to be significant models (p < 0.05). The predictive equations were also formed for lipid yield and EPA composition. The predicted optimum lipid yield and EPA composition at 236.54°C, 13.95 minutes, and 60.50 g algae/L were 18.278 wt% of total biomass and 14.036 wt% of total fatty acid methyl ester (FAME), respectively.
| S-EPMC6354137 | biostudies-literature
Project description:Coriandrum sativum L. seeds are widely recognized for their traditional use in medicine. Among the most investigated components, the terpenoid linalool and monounsaturated petroselinic acid have attracted interest for their nutritional value. Instead, minor attention was paid to the polyphenolic fraction, resulting still being incomplete today. This study aimed to develop a systematic approach in which green natural deep eutectic solvents (NADES) were combined with conventional (maceration, MAC) or non-conventional (ultrasound-assisted extraction, UAE) techniques in a one-step methodology to recover polyphenols from coriander seeds. The NADES system choline chloride-citric acid (ChCl:CA, 1:1) was firstly evaluated, coupled with MAC or UAE, and then compared with ChCl-Urea (ChCl:Ur, 1:1) and ChCl-Glucose (ChCl:Glu, 1:1) under optimal conditions (20 min extraction time). The system ChCl:Ur UAE significantly improved the extraction of chlorogenic acid and its isomer (453.90 ± 4.77 and 537.42 ± 1.27 µg/g, respectively), while the system ChCl:Glu UAE improved the extraction of protocatechuic, caffeic and p-coumaric acids (131.13 ± 6.16, 269.03 ± 4.15 and 57.36 ± 0.06 µg/g, respectively). The highest levels of rutin were obtained with ChCl:CA-based NADES when the MAC technique was applied (820.31 ± 28.59 µg/g). These findings indicate that the NADES composition could be appropriately modulated to tailor extraction towards higher levels of a desirable bioactive for further applications.
| S-EPMC10741060 | biostudies-literature
Project description:The bioactive compounds and antioxidant activities of propolis extracts were investigated using subcritical water extraction (SWE). SWE was performed by varying temperature (110-200 °C) and time (10-30 min). SWE using only water as solvent successfully to extracted bioactive compounds from propolis using high-purity glass thimbles. The concentrations of galangin (16.37 ± 0.61 mg/g), and chrysin (7.66 ± 0.64 mg/g) were maximal at 200 °C for 20 min, and 170 °C for 20 min, respectively. The antioxidative properties from propolis increased with the increasing extraction temperature and extraction time on SWE. The maximum yields of the total phenolics (226.37 ± 4.37 mg/g), flavonoids (70.28 ± 1.33 mg/g), and antioxidant activities (88.73 ± 0.58%, 98.86 ± 0.69%, and 858.89 ± 11.48 mg/g) were obtained at 200 °C for 20 min. Compared with using ethanol extraction (at 25 °C for 24 h, total phenolics = 176.28 ± 0.35, flavonoids = 56.41 ± 0.65, antioxidant activities = 72.74 ± 0.41%, 95.18 ± 0.11%, 619.51 ± 8.17 mg/g), all yields of SWE extracts obtained at 200 °C for 20 min were higher. SWE is suitable for a much faster and more efficient method extracting bioactive compounds from propolis compared to traditional extraction method.
| S-EPMC10497595 | biostudies-literature
Project description:The design of a micromirror for biomedical applications requires multiple output responses to be optimized, given a set of performance parameters and constraints. This paper presents the parametric design optimization of an electrothermally actuated micromirror for the deflection angle, input power, and micromirror temperature rise from the ambient for Optical Coherence Tomography (OCT) system. Initially, a screening design matrix based on the Design of Experiments (DOE) technique is developed and the corresponding output responses are obtained using coupled structural-thermal-electric Finite Element Modeling (FEM). The interaction between the significant design factors is analyzed by developing Response Surface Models (RSM) for the output responses. The output responses are optimized by combining the individual responses into a composite function using desirability function approach. A downhill simplex method, based on the heuristic search algorithm, is implemented on the RSM models to find the optimal levels of the design factors. The predicted values of output responses obtained using multi-response optimization are verified by the FEM simulations.
| S-EPMC6189808 | biostudies-literature
Project description:The aim of this study was to find the optimum condition of pulsed electric field (PEF) and intense pulsed light (IPL) for the enhancement of subcritical water extraction (SWE), which is an eco-friendly extraction method, for extracting tea catechins from green tea leaves (Camellia sinensis). The leaves were treated with PEF under conditions of electric field strength (1, 2 and 3 kV/cm) during 60 s. Moreover, IPL was applied at various voltages (800, 1000, and 1200 V) for 60 s. The SWE was performed for 5 min at varying temperatures (110, 130, 150, 170, and 190 °C). The maximum yield of total catechin was 44.35 ± 2.00 mg/g dry green tea leaves at PEF treatment conditions of 2 kV/cm during 60 s, as well as the SWE temperature of 130 °C. In the case of IPL treatment, the largest amount of total catechin was 48.06 ± 5.03 mg/g dry green tea leaves at 800 V during 60 s when the extraction temperature was 130 °C. The total catechin content was increased by 15.43% for PEF and 25.09% for IPL compared to the value of untreated leaves. This study verified that PEF and IPL had a positive effect on the enhancement of tea catechins extraction from green tea leaves using SWE.
| S-EPMC8701373 | biostudies-literature