Enhancing Emission and Stability in Na-Doped Cs3Cu2I5 Nanocrystals
Ontology highlight
ABSTRACT:
SUBMITTER: Guo N
PROVIDER: S-EPMC11243144 | biostudies-literature | 2024 Jun
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Lead-free halide perovskite nanocrystals (NCs) have recently attracted attention due to their nontoxicity and stability as alternatives to lead-based perovskite NCs. Here, we report undoped and manganese-doped all-inorganic, lead-free double perovskite (DP) NCs: Cs2NaIn x Bi1-x Cl6 (0 < x < 1) and Cs2NaIn x Bi1-x Cl6:Mn (0 ≤ x ≤ 1) NCs. Undoped NCs exhibit blue emission. Through doping Mn2+ ions into Cs2NaIn x Bi1-x Cl6 NCs, we can avoid self-trapped exciton emission and realize bright orange red emission of Mn2+ dopants with the highest photoluminescence quantum efficiency of 44.6%. The photoluminescence (PL) is tunable from yellow emission to orange-red emission corresponding to a red shift from 583 to 614 nm with increasing In content. Interestingly, the PL emission of Mn-doped NCs shows a red shift from the bulk size to the nanoscale. The Mn-doped NCs show good stability in air. In addition, we further prove the process of dark self-trapped state-assisted Mn2+ emission in DP NCs by ultrafast transient absorption techniques.
| S-EPMC7181313 | biostudies-literature
Project description:The unusual temperature dependence of exciton emission decay in CsPbX3 perovskite nanocrystals (NCs) attracts considerable attention. Upon cooling, extremely short (sub-ns) lifetimes were observed and were explained by an inverted bright-dark state splitting. Here, we report temperature-dependent exciton lifetimes for CsPbCl3 NCs doped with 0-41% Mn2+. The exciton emission lifetime increases upon cooling from 300 to 75 K. Upon further cooling, a strong and fast sub-ns decay component develops. However, the decay is strongly biexponential and also a weak, slow decay component is observed with a ∼40-50 ns lifetime below 20 K. The slow component has a ∼5-10 times stronger relative intensity in Mn-doped NCs compared to that in undoped CsPbCl3 NCs. The temperature dependence of the slow component resembles that of CdSe and PbSe quantum dots with an activation energy of ∼19 meV for the dark-bright state splitting. Based on our observations, we propose an alternative explanation for the short, sub-ns exciton decay time in CsPbX3 NCs. Slow bright-dark state relaxation at cryogenic temperatures gives rise to almost exclusively bright state emission. Incorporation of Mn2+ or high magnetic fields enhances the bright-dark state relaxation and allows for the observation of the long-lived dark state emission at cryogenic temperatures.
| S-EPMC6410607 | biostudies-literature
Project description:The morphology of hexagonal phase NaYF4:Er(3+) nanorods synthesized by hydrothermal method changed greatly after a continuing calcination, along with a phase transformation to cubic phase. Photoluminescence (PL) spectra indicated that mid-infrared (MIR) emission was obtained in both hexagonal and cubic phase NaYF4:Er(3+) nanocrystals for the first time. And the MIR emission of NaYF4:Er(3+) nanocrystals enhanced remarkably at higher calcination temperature. To prevent uncontrollable morphology from phase transformation, the cubic phase NaYF4:Er(3+) nanospheres with an average size of ~100 nm were prepared via a co-precipitation method directly. In contrast, the results showed better morphology and size of cubic phase NaYF4:Er(3+) nanocrystals have realized when calcined at different temperatures. And PL spectra demonstrated a more intense MIR emission in the cubic phase NaYF4:Er(3+) nanocrystals with an increasing temperature. Besides, the MIR emission peak of Er(3+) ions had an obvious splitting in cubic phase NaYF4. Therefore, cubic phase NaYF4:Er(3+) nanospheres with more excellent MIR luminescent properties seems to provide a new material for nanocrystal-glass composites, which is expected to open a broad new field for the realization of MIR lasers gain medium.
| S-EPMC4958980 | biostudies-literature
Project description:Recently, the polarization effect has been receiving tremendous attention, as it can result in improved stability and charge transfer efficiency of metal-halide perovskites (MHPs). However, realizing the polarization effect on CsPbX3 NCs still remains a challenge. Here, metal ions with small radii (such as Mg2+, Li+, Ni2+, etc.) are introduced on the surface of CsPbX3 NCs, which facilitate the arising of electric dipole and surface polarization. The surface polarization effect promotes redistribution of the surface electron density, leading to reinforced surface ligand bonding, reduced surface defects, near unity photoluminescence quantum yields (PLQYs), and enhanced stability. Moreover, further introduction of hydroiodic acid results in the in situ formation of tert-butyl iodide (TBI), which facilitates the successful synthesis of pure iodine-based CsPbI3 NCs with high PLQY (95.3%) and stability under ambient conditions. The results of this work provide sufficient evidence to exhibit the crucial role of the surface polarization effect, which promotes the synthesis of high-quality MHPs and their applications in the fields of optoelectronic devices.
| S-EPMC10445435 | biostudies-literature
Project description:Monodisperse lanthanide oxyfluorides LnOF (Ln = Gd, Y) with mid-infrared emissions were controllably synthesized via a mild co-precipitation route and a subsequent heat-treatment. The detailed composition and morphology were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and high resolution transmission electron microscopy (HRTEM). The results showed that monodisperse GdOF:Er3+ were nano-riced shape with length about 350 nm and width about 120 nm, while the quasi-spherical YOF:Er3+ were uniform nanocrystals with an average size around 100 nm. The influence of calcination temperature on the size and phase transition of LnOF nanocrystals was also investigated. The photoluminescence (PL) spectra indicated that the 2.7 μm emission of Er3+ had achieved in both GdOF and YOF nanocrystals, which were calcined at different temperatures. In addition, the decay time of both 4I13/2 and 4I13/2 energy levels corresponding to Er3+ in YOF nanocrystals were also studied in detail. The results suggested that both rice-shaped GdOF nanocrystals and YOF nanocrystals could provide suitable candidate materials for nanocrystals-glass composites, which could be a step forward to the realization of mid-infrared laser materials.
| S-EPMC5066252 | biostudies-literature
Project description:Recently proposed bimetallic octahedral Pt-Ni electrocatalysts for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cell (PEMFC) cathodes suffer from particle instabilities in the form of Ni corrosion and shape degradation. Advanced trimetallic Pt-based electrocatalysts have contributed to their catalytic performance and stability. In this work, we propose and analyse a novel quaternary octahedral (oh-)Pt nanoalloy concept with two distinct metals serving as stabilizing surface dopants. An efficient solvothermal one-pot strategy was developed for the preparation of shape-controlled oh-PtNi catalysts doped with Rh and Mo in its surface. The as-prepared quaternary octahedral PtNi(RhMo) catalysts showed exceptionally high ORR performance accompanied by improved activity and shape integrity after stability tests compared to previously reported bi- and tri-metallic systems. Synthesis, performance characteristics and degradation behaviour are investigated targeting deeper understanding for catalyst system improvement strategies. A number of different operando and on-line analysis techniques were employed to monitor the structural and elemental evolution, including identical location scanning transmission electron microscopy and energy dispersive X-ray analysis (IL-STEM-EDX), operando wide angle X-ray spectroscopy (WAXS), and on-line scanning flow cell inductively coupled plasma mass spectrometry (SFC-ICP-MS). Our studies show that doping PtNi octahedral catalysts with small amounts of Rh and Mo suppresses detrimental Pt diffusion and thus offers an attractive new family of shaped Pt alloy catalysts for deployment in PEMFC cathode layers.
| S-EPMC9384817 | biostudies-literature
Project description:Fluorine-doped tin oxide (FTO) is one of the most studied and established materials for transparent electrode applications. However, the syntheses for FTO nanocrystals are currently very limited, especially for stable and well-dispersed colloids. Here, we present the synthesis and detailed characterization of FTO nanocrystals using a colloidal heat-up reaction. High-quality SnO2 quantum dots are synthesized with a tuneable fluorine amount up to ~10% atomic, and their structural, morphological and optical properties are fully characterized. These colloids show composition-dependent optical properties, including the rise of a dopant-induced surface plasmon resonance in the near infrared.
| S-EPMC7712819 | biostudies-literature
Project description:One of the important obstacles on the way to application of Si nanocrystals for development of practical devices is their typically low emissivity. In this study we explore the limits of external quantum yield of photoluminescence of solid-state dispersions of Si nanocrystals in SiO2. By making use of a low-temperature hydrogen passivation treatment we demonstrate a maximum emission quantum efficiency of approximately 35%. This is the highest value ever reported for this type of material. By cross-correlating PL lifetime with EQE values, we obtain a comprehensive understanding of the efficiency limiting processes induced by Pb-defects. We establish that the observed record efficiency corresponds to an interface density of Pb-centers of 1.3 × 10(12) cm(12), which is 2 orders of magnitude higher than for the best Si/SiO2 interface. This result implies that Si nanocrystals with up to 100% emission efficiency are feasible.
| S-EPMC4726123 | biostudies-literature
Project description:Understanding and tuning the ligand shell composition in colloidal halide perovskite nanocrystals (NCs) has been done systematically only for Pb-based perovskites, while much less is known on the surface of Pb-free perovskite systems. Here, we reveal the ligand shell architecture of Bi-doped Cs2Ag1-x Na x InCl6NCs via nuclear magnetic resonance analysis. This material, in its bulk form, was found to have a photoluminescence quantum yield (PLQY) as high as 86%, a record value for halide double perovskites. Our results show that both amines and carboxylic acids are present and homogeneously distributed over the surface of the NCs. Notably, even for an optimized surface ligand coating, achieved by combining dodecanoic acid and decylamine, a maximum PLQY value of only 37% is reached, with no further improvements observed when exploiting post-synthesis ligand exchange procedures (involving Cs-oleate, different ammonium halides, thiocyanates and sulfonic acids). Our density functional theory calculations indicate that, even with the best ligands combination, a small fraction of unpassivated surface sites, namely undercoordinated Cl ions, is sufficient to create deep trap states, opposite to the case of Pb-based perovskites that exhibit much higher defect tolerance. This was corroborated by our transient absorption measurements, which showed that an ultrafast trapping of holes (most likely mediated by surface Cl-trap states) competes with their localization at the AgCl6 octahedra, from where, instead, they can undergo an optically active recombination yielding the observed PL emission. Our results highlight that alternative surface passivation strategies should be devised to further optimize the PLQY of double perovskite NCs, which might include their incorporation inside inorganic shells.
| S-EPMC7901666 | biostudies-literature
Project description:The past decade has seen a rapid development in metal halide perovskite nanocrystals (NCs), which has been witnessed by their potential applications in nanotechnology. The inimitable chemical nature behind their unique photoluminescence characteristics has attracted a growing body of researchers. However, the low intrinsic stability and surface defects of perovskite NCs have hampered their widespread applications. Therefore, numerous techniques such as doping and encapsulation (polymer matrices, silica coating, salt matrix, etc.) have been examined for the surface modification of perovskite NCs and to increase their efficiency and stability. In this study, we demonstrated the self-passivation method for surface defects by introducing potassium (K) or rubidium (Rb) during the colloidal fabrication of NCs, resulting in the much-improved crystallinity, photoluminescence, and improved radiative efficiency. In addition, K-doped NCs showed a long-term colloidal stability of more than 1 month, which indicates the strong bonding between the NCs and the smaller-sized potassium cations (K+). We observed the enhancement of the radiative lifetime that can also be explained by the prevention of "Frenkel defects" when K+ stays at the interstitial site of the nanocrystal structure. Furthermore, our current findings signify the importance of surface modification techniques using alkali metal ions to reduce the surface traps of perovskite nanocrystals (PeNCs). Comparable developments could be applied to polycrystalline perovskite thin films to reduce the interface trap densities. The findings of this study have several important implications for future light-emitting applications.
| S-EPMC10809411 | biostudies-literature