Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

NO₂-Sensitive SnO₂ Nanoparticles Prepared Using a Freeze-Drying Method.

ABSTRACT: The n-type semiconductor SnO₂ with a wide band gap (3.6 eV) is massively used in gas-sensitive materials, but pure SnO₂ still suffers from a high operating temperature, low response, and tardy responding speed. To solve these problems, we prepared small-sized pure SnO₂ using hydrothermal and freeze-drying methods (SnO₂-FD) and compared it with SnO₂ prepared using a normal drying method (SnO₂-AD). The sensor of SnO₂-FD had an ultra-high sensitivity to NO₂ at 100 °C with excellent selectivity and humidity stability. The outstanding gas sensing properties are attributed to the modulation of energy band structure and the increased carrier concentration, making it more accessible for electron exchange with NO₂. The excellent gas sensing properties of SnO₂-FD indicate its tremendous potential as a NO₂ sensor.

SUBMITTER: Liu L

PROVIDER: S-EPMC11313386 | biostudies-literature | 2024 Jul

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

NO2-Sensitive SnO2 Nanoparticles Prepared Using a Freeze-Drying Method.

Liu Lin L Zhao Jinbo J Jin Zhidong Z Liu Fei F Zhao Dewen D Liu Zhengyang Z Wang Fenglong F Wang Zhou Z Liu Jiurong J Wu Lili L

Materials (Basel, Switzerland) 20240727 15

The n-type semiconductor SnO2 with a wide band gap (3.6 eV) is massively used in gas-sensitive materials, but pure SnO2 still suffers from a high operating temperature, low response, and tardy responding speed. To solve these problems, we prepared small-sized pure SnO2 using hydrothermal and freeze-drying methods (SnO2-FD) and compared it with SnO2 prepared using a normal drying method (SnO2-AD). The sensor of SnO2-FD h ...[more]

PMID: 39124379

Similar Datasets

Effects of drying method and excipient on the structure and physical stability of protein solids: Freeze drying vs. spray freeze drying.

Project description:This study aims to determine the impacts of drying method and excipient on changes in protein structure and physical stability of model protein solids. Protein solids containing one of two model proteins (lysozyme or myoglobin) were produced with or without excipients (sucrose or mannitol) using freeze drying or spray freeze drying (SFD). The protein powders were then characterized using solid-state Fourier transform infrared spectroscopy (ssFTIR), differential scanning calorimetry (DSC), circular dichroism spectrometry (CD), size exclusion chromatography (SEC), BET surface area measurements and solid-state hydrogen deuterium exchange with mass spectrometry (ssHDX-MS). ssFTIR and CD could identify little to no difference in structure of the proteins in the formulation. ssHDX-MS was able to identify the population heterogeneity, which was undetectable by conventional characterization techniques of ssFTIR and CD. ssHDX-MS metrics such as Dmax and peak area showed a good correlation with the protein physical instability (loss of the monomeric peak area by size exclusion chromatography) in 90-day stability studies conducted at 40 °C for lysozyme. Higher specific surface area was associated with greater loss in monomer content for myoglobin-mannitol formulations as compared to myoglobin-only formulations. Spray freeze drying seems a viable manufacturing technique for protein solids with appropriate optimization of formulations. The differences observed within the formulations and between the processes using ssHDX-MS, BET surface area measurements and SEC in this study provide an insight into the influence of drying methods and excipients on protein physical stability.

| S-EPMC7856218 | biostudies-literature

Macroporous Calcium Phosphate/Chitosan Composites Prepared via Unidirectional Ice Segregation and Subsequent Freeze-Drying.

Project description:Calcium phosphate chitosan-based composites have gained much interest in recent years for biomedical purposes. In this paper, three-dimensional calcium phosphate chitosan-based composites with different mineral contents were produced using a green method called ice segregation induced self-assembly (ISISA). In this methodology, ice crystals were used as a template to produce porous structures from an aqueous solution of chitosan (CS) and hydroxyapatite (Hap) also containing acetic acid (pH = 4.5). For better characterization of the nature of the inorganic matter entrapped within the resulting composite, we performed either oxygen plasma or calcination processes to remove the organic matter. The nature of the phosphate salts was studied by XRD and NMR studies. Amorphous calcium phosphate (ACP) was identified as the mineral phase in the composites submitted to oxygen plasma, whereas crystalline Hap was obtained after calcination. SEM microscopy revealed the formation of porous structures (porosity around 80-85%) in the original composites, as well as in the inorganic matrices obtained after calcination, with porous channels of up to 50 µm in diameter in the former case and of up to 20 µm in the latter. The biocompatibility of the composites was assessed using two different cell lines: C2C12GFP premyoblastic cells and MC3T3 preosteoblastic cells.

| S-EPMC5459033 | biostudies-literature

Production of high loading insulin nanoparticles suitable for oral delivery by spray drying and freeze drying techniques.

Project description:Insulin nanoparticles (NPs) with high loading content have found diverse applications in different dosage forms. This work aimed to evaluate the impact of freeze-drying and spray drying process on the structures of insulin-loaded chitosan nanoparticles, with or without mannitol as cryoprotectants. We also assessed the quality of these nanoparticles by redissolving them. Before dehydration, the chitosan/sodium tripolyphosphate/insulin crosslinked nanoparticles were optimized to 318 nm of particle size, 0.18 of PDI, 99.4% of entrapment efficiency, and 25.01% of loading content. After reconstitution, all nanoparticles, except the one produced by the freeze-drying method without using mannitol, maintained their spherical particle structure. The nanoparticles dehydrated by spray drying without mannitol also showed the smallest mean particle size (376 nm) and highest loading content (25.02%) with similar entrapment efficiency (98.7%) and PDI (0.20) compared to mannitol-containing nanoparticles dehydrated by either spray drying or freeze-drying techniques. The nanoparticles dried by spray drying without mannitol also resulted in the fastest release and highest cellular uptake efficacy of insulin. This work shows that spray drying can dehydrate insulin nanoparticles without the need for cryoprotectants, creating a significant advantage in terms of greater loading capacity with lower additive requirements and operating costs as compared to conventional freeze drying approaches.

| S-EPMC9200718 | biostudies-literature

Freeze Drying of Polymer Nanoparticles and Liposomes Exploiting Different Saccharide-Based Approaches.

Project description:Biodegradable nanocarriers represent promising tools for controlled drug delivery. However, one major drawback related to their use is the long-term stability, which is largely influenced by the presence of water in the formulations, so to solve this problem, freeze-drying with cryoprotectants has been proposed. In the present study, the influence of the freeze-drying procedure on the storage stability of poly(lactide-co-glycolide) (PLGA) nanoparticles and liposomes was evaluated. In particular, conventional cryoprotectants were added to PLGA nanoparticle and liposome formulations in various conditions. Additionally, hyaluronic acid (HA), known for its ability to target the CD44 receptor, was assessed as a cryoprotective excipient: it was added to the nanocarriers as either a free molecule or conjugated to a phospholipid to increase the interaction with the polymer or lipid matrix while exposing HA on the nanocarrier surface. The formulations were resuspended and characterized for size, polydispersity index, zeta potential and morphology. It was demonstrated that only the highest percentages of cryoprotectants allowed the resuspension of stable nanocarriers. Moreover, unlike free HA, HA-phospholipid conjugates were able to maintain the particle mean size after the reconstitution of lyophilized nanoparticles and liposomes. This study paves the way for the use of HA-phospholipids to achieve, at the same time, nanocarrier cryoprotection and active targeting.

| S-EPMC9921637 | biostudies-literature

Inhalable aerosol microparticles with low carrier dosage and high fine particle fraction prepared by spray-freeze-drying.

Project description:Co-suspension drug-loading technology, namely Aerosphere™, can improve fine particle fraction (FPF) and delivered dose content uniformity (DDCU). However, because of its poor drug-loading efficacy, the phospholipid carrier dosage in Aerosphere™ is usually dozens of times greater than that of the drug, resulting in a high material cost and blockage of the actuator. In this study, spray-freeze-drying (SFD) technology was used to prepare inhalable distearoylphosphatidylcholine (DSPC)-based microparticles for pressurized metered-dose inhalers (pMDI). Water-soluble, low-dose formoterol fumarate was used as an indicator to evaluate the aerodynamic performance of the inhalable microparticles. Water-insoluble, high-dose mometasone furoate was used to investigate the effects of drug morphology and drug-loading mode on the drug delivery efficiency of the microparticles. The results demonstrated that DSPC-based microparticles prepared using the co-SFD technology not only achieved higher FPF and more consistent delivered dose than those of drug crystal-only pMDI, but the amount of DSPC was also reduced to approximately 4% of that prepared using the co-suspension technology. This SFD technology may also be used to improve the drug delivery efficiency of other water-insoluble and high-dose drugs.

| S-EPMC9988654 | biostudies-literature

Continuous freeze-drying of messenger RNA lipid nanoparticles enables storage at higher temperatures.

Project description:Messenger RNA (mRNA) lipid nanoparticles (LNPs) have emerged at the forefront during the COVID-19 vaccination campaign. Despite their tremendous success, mRNA vaccines currently require storage at deep freeze temperatures which complicates their storage and distribution, and ultimately leads to lower accessibility to low- and middle-income countries. To elaborate on this challenge, we investigated freeze-drying as a method to enable storage of mRNA LNPs at room- and even higher temperatures. More specifically, we explored a novel continuous freeze-drying technique based on spin-freezing, which has several advantages compared to classical batch freeze-drying including a much shorter drying time and improved process and product quality controlling. Here, we give insight into the variables that play a role during freeze-drying by evaluating the impact of the buffer and mRNA LNP formulation (ionizable lipid to mRNA weight ratio) on properties such as size, morphology and mRNA encapsulation. We found that a sufficiently high ionizable lipid to mRNA weight ratio was necessary to prevent leakage of mRNA during freeze-drying and that phosphate and Tris, but not PBS, were appropriate buffers for lyophilization of mRNA LNPs. We also studied the stability of optimally lyophilized mRNA LNPs at 4 °C, 22 °C, and 37 °C and found that transfection properties of lyophilized mRNA LNPs were maintained during at least 12 weeks. To our knowledge, this is the first study that demonstrates that optimally lyophilized mRNA LNPs can be safely stored at higher temperatures for months without losing their transfection properties.

| S-EPMC10062427 | biostudies-literature

Development of antifungal fibrous ocular insert using freeze-drying technique.

Project description:Candida species is one of the pathogenic fungi of the eye responsible for keratitis that frequently causes vision impairment and blindness. Effective treatment requires long-term use of antifungal drugs, which is opposed by the defensive mechanisms of the eye and inadequate corneal penetration. The objective of this study was to develop a carrier for prolonged ocular application of fluconazole (FLZ) to treat keratitis. FLZ was encapsulated into chitosan fibrous matrices (F1-F4) using different chitosan concentrations (0.02, 0.1, 0.5, and 1%w/v, respectively) by freeze-drying as a single-step technique. Studying the morphology and surface properties of the inserts revealed a porous matrix with fibrous features with a large surface area. Thermal stability and chemical compatibility were confirmed by DSC/TGA/DTA and FT-IR, respectively. Loading capacity (LC) and entrapment efficiency (EE) were determined. According to the in vitro release study, F4 (0.11 mg mg-1 LC and 87.53% EE) was selected as the optimum insert because it had the most sustained release, with 15.85% burst release followed by 75.62% release within 12 h. Ex vivo corneal permeation study revealed a 1.2-fold increase in FLZ permeation from F4 compared to FLZ aqueous solution. Also, in the in vivo pharmacokinetic study in rabbits, F4 increased the AUC0-8 of FLZ by 9.3-fold and its concentration in aqueous humor was maintained above the MIC through the experimentation time. Studies on cytotoxicity (MTT assay) provide evidence for the safety and biocompatibility of F4. Therefore, the freeze-dried FLZ-loaded chitosan fibrous insert could be a promising candidate for treating ocular keratitis.

| S-EPMC11291584 | biostudies-literature

Production of Glycerol Carbonate from Glycerol over Templated-Sodium-Aluminate Catalysts Prepared Using a Spray-Drying Method.

Project description:Glycerol carbonate (GLC) was synthesized from glycerol and dimethyl carbonate (DMC) over sodium aluminate (NaAlO2) catalysts. The catalysts were prepared using a spray-drying method and compared with those prepared using the conventional hot-air drying method. Polyvinylpyrrolidone and glycerol were used as a catalyst template to increase the surface area and porosity of the catalysts. Additionally, different operating conditions were investigated such as the catalyst concentration, glycerol-to-DMC ratio, reaction temperature, reaction time, and catalyst reusability. The NaAlO2 catalyst prepared using the spray-drying method with 30 wt % glycerol as the template yielded the maximum GLC (85%) with 100% GLC selectivity.

| S-EPMC6648632 | biostudies-literature

Anodic SnO2 Nanoporous Structure Decorated with Cu2O Nanoparticles for Sensitive Detection of Creatinine: Experimental and DFT Study.

Project description:Advanced anodic SnO2 nanoporous structures decorated with Cu2O nanoparticles (NPs) were employed for creatinine detection. Anodization of electropolished Sn sheets in 0.3 M aqueous oxalic acid electrolyte under continuous stirring produced complete open top, crack-free, and smooth SnO2 nanoporous structures. Structural analyses confirm the high purity of rutile SnO2 with successful functionalization of Cu2O NPs. Morphological studies revealed the formation of self-organized and highly-ordered SnO2 nanopores, homogeneously decorated with Cu2O NPs. The average diameter of nanopores is ∼35 nm, while the average Cu2O particle size is ∼23 nm. Density functional theory results showed that SnO2@Cu2O hybrid nanostructures are energetically favorable for creatinine detection. The hybrid nanostructure electrode exhibited an ultra-high sensitivity of around 24343 μA mM-1 cm-2 with an extremely lower detection limit of ∼0.0023 μM, a fast response time (less than 2 s), and wide linear detection ranges of 2.5-45 μM and 100 μM to 15 mM toward creatinine. This is ascribed to the creation of highly active surface sites as a result of Cu2O NP functionalization, SnO2 band gap diminution, and the formation of heterojunction and Cu(1)/Cu(ll)-creatinine complexes through secondary amines which occur in the creatinine structure. The real-time analysis of creatinine in blood serum by the fabricated electrode evinces the practicability and accuracy of the biosensor with reference to the commercially existing creatinine sensor. The proposed biosensor demonstrated excellent stability, reproducibility, and selectivity, which reflects that the SnO2@Cu2O nanostructure is a promising candidate for the non-enzymatic detection of creatinine.

| S-EPMC9685770 | biostudies-literature

Wet-chemically prepared low-dimensional ZnO/Al2O3/Cr2O3 nanoparticles for xanthine sensor development using an electrochemical method.

Project description:A reliable xanthine (XNT) chemical sensor was fabricated using a facile wet-chemical method (by co-precipitation) to prepare ZnO/Al2O3/Cr2O3 nanoparticles (NPs) in an alkaline medium at low temperature. Powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR) and ultraviolet-visible spectroscopy (UV-vis) were implemented for detailed characterization of the NPs. To fabricate the working electrode as a XNT chemical sensor probe, a glassy carbon electrode (GCE) with a 0.0316 cm2 surface area was coated with an ethanolic slurry of the prepared ZnO/Al2O3/Cr2O3 NPs to make a thin layer and used to analyse XNT in a phosphate buffer system. To evaluate the analytical performances of the XNT chemical sensor, the calibration curve of XNT was plotted as the relationship of current versus the concentration of XNT. The plotted calibration curve was found to be linear over the LDR (linear dynamic range) of 0.05 nM to 5.0 μM. The assembled XNT electrochemical sensor exhibited the highest sensitivity (70.8861 μA μM-1 cm-2), the lowest detection limit (1.34 ± 0.07 pM), good reproducibility performance with high accuracy and long-term stability with standard results under ambient conditions. This is a simple route to selectively detect XNT with wet-chemically prepared co-doped ZnO/Al2O3/Cr2O3 nanomaterials using a reliable electrochemical method at a large scale for safety within healthcare fields.

| S-EPMC9079617 | biostudies-literature