Dataset Information

Batch production prediction for the mechanical cutting industry based on process capability.

ABSTRACT: In the mechanical cutting industry, trial production is used for predicting and evaluating the quality of product processes before batch production, and it can be expressed through the qualification rate. However, it cannot objectively and comprehensively evaluate the quality of product processes. This study optimizes the analysis of outliers and stability in mathematical statistics to better apply it in the mechanical cutting industry; then, it combines them with process capability analysis. Simultaneously, considering the non-normal distribution of process parameters, a batch production-prediction model is proposed. The reliability of batch production-prediction model is verified by the diameter, roundness and roughness of structural common samples. Meanwhile, for other mechanical parts in the mechanical cutting industry, the model proposed in this paper can be used to quickly and accurately predict and evaluate batch production.

SUBMITTER: Xu G

PROVIDER: S-EPMC11316087 | biostudies-literature | 2024 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Batch production prediction for the mechanical cutting industry based on process capability.

Xu Guangtao G Liu Tianyi T Wang Weichuan W Qiao Zeyuan Z Wang Gang G Peng Zhenlong Z Zhao Minghao M

Scientific reports 20240809 1

In the mechanical cutting industry, trial production is used for predicting and evaluating the quality of product processes before batch production, and it can be expressed through the qualification rate. However, it cannot objectively and comprehensively evaluate the quality of product processes. This study optimizes the analysis of outliers and stability in mathematical statistics to better apply it in the mechanical cutting industry; then, it combines them with process capability analysis. Si ...[more]

PMID: 39122861

Similar Datasets

Project description:Although process intensification by continuous operation has been successfully applied in the chemical industry, the biopharmaceutical industry primarily uses fed-batch, rather than continuous or perfusion methods, to produce stable monoclonal antibodies (mAbs) from Chinese hamster ovary (CHO) cells. Conventional fed-batch bioreactors may start with an inoculation viable cell density (VCD) of ~0.5 × 106 cells/mL. Increasing the inoculation VCD in the fed-batch production bioreactor (referred to as N stage bioreactor) to 2-10 × 106 cells/mL by introducing perfusion operation or process intensification at the seed step (N-1 step) prior to the production bioreactor has recently been used because it increases manufacturing output by shortening cell culture production duration. In this study, we report that increasing the inoculation VCD significantly improved the final titer in fed-batch production within the same 14-day duration for 3 mAbs produced by 3 CHO GS cell lines. We also report that other non-perfusion methods at the N-1 step using either fed batch or batch mode with enriched culture medium can similarly achieve high N-1 final VCD of 22-34 × 106 cells/mL. These non-perfusion N-1 seeds supported inoculation of subsequent production fed-batch production bioreactors at increased inoculation VCD of 3-6 × 106 cells/mL, where these achieved titer and product quality attributes comparable to those inoculated using the perfusion N-1 seeds demonstrated in both 5-L bioreactors, as well as scaled up to 500-L and 1000-L N-stage bioreactors. To operate the N-1 step using batch mode, enrichment of the basal medium was critical at both the N-1 and subsequent intensified fed-batch production steps. The non-perfusion N-1 methodologies reported here are much simpler alternatives in operation for process development, process characterization, and large-scale commercial manufacturing compared to perfusion N-1 seeds that require perfusion equipment, as well as preparation and storage vessels to accommodate large volumes of perfusion media. Although only 3 stable mAbs produced by CHO cell cultures are used in this study, the basic principles of the non-perfusion N-1 seed strategies for shortening seed train and production culture duration or improving titer should be applicable to other protein production by different mammalian cells and other hosts at any scale biologics facilities.

Project description:BackgroundFed-batch conditions are advantageous for industrial cultivations as they avoid unfavorable phenomena appearing in batch cultivations. Those are for example the formation of overflow metabolites, catabolite repression, oxygen limitation or inhibition due to elevated osmotic concentrations. For both, the early bioprocess development and the optimization of existing bioprocesses, small-scale reaction vessels are applied to ensure high throughput, low costs and prompt results. However, most conventional small-scale procedures work in batch operation mode, which stands in contrast to fed-batch conditions in large-scale bioprocesses. Extensive expenditure for installations and operation accompany almost all cultivation systems in the market allowing fed-batch conditions in small-scale. An alternative, more cost efficient enzymatic glucose release system is strongly influenced by environmental conditions. To overcome these issues, this study investigates a polymer-based fed-batch system for controlled substrate release in microtiter plates.ResultsImmobilizing a solid silicone matrix with embedded glucose crystals at the bottom of each well of a microtiter plate is a suitable technique for implementing fed-batch conditions in microtiter plates. The results showed that the glucose release rate depends on the osmotic concentration, the pH and the temperature of the medium. Moreover, the applied nitrogen source proved to influence the glucose release rate. A new developed mathematical tool predicts the glucose release for various media conditions. The two model organisms E. coli and H. polymorpha were cultivated in the fed-batch microtiter plate to investigate the general applicability for microbial systems. Online monitoring of the oxygen transfer rate and offline analysis of substrate, product, biomass and pH confirmed that fed-batch conditions are comparable to large-scale cultivations. Furthermore, due to fed-batch conditions in microtiter plates, product formation could be enhanced by the factor 245 compared to batch cultivations.ConclusionsThe polymer-based fed-batch microtiter plate represents a sophisticated and cost efficient system to mimic typical industrial fed-batch conditions in small-scale. Thus, a more reliable strain screening and early process development can be performed. A systematical scale-down with low expenditure of work, time and money is possible.

Dataset Information

Batch production prediction for the mechanical cutting industry based on process capability.

Publications

Batch production prediction for the mechanical cutting industry based on process capability.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets