Dataset Information

Economic analysis of reciprocating engine generating with bio-syngas at predicted maximum power condition.

ABSTRACT: In order to effectively utilize woody biomass, which has a low abundance density, it is necessary to develop a power generation system that can convert it with high efficiency even with a small capacity as less than 2 MW. For electricity generation, it is reasonable to use a small reciprocating engine. In the case of a naturally aspirated spark ignition reciprocating engine (SIRE), the amount of aspirated gas in one cycle is determined almost entirely by the displacement. The thermal efficiency of the SIRE generally increases with the power. Therefore, to improve the thermal efficiency, it is effective to make the low heating value (LHV) of the fuel higher to increase the power of the naturally aspirated SIRE. In this paper, three methods are used to increase the LHV of the bio-syngas: 1) reducing the nitrogen density of the bio-syngas (upgrade bio-syngas), 2) adding hydrogen to the bio-syngas, and 3) adding methane to the bio-syngas. Using these fuels, 1) the conditions for high power, and 2) the costs assumed for each condition, are evaluated through experiments and estimates. The results showed that the upgrade bio-syngas, obtained by gasification with oxygen-enriched air, had the highest power and the best cost-effectiveness.

SUBMITTER: Enomoto H

PROVIDER: S-EPMC11320148 | biostudies-literature | 2024 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Economic analysis of reciprocating engine generating with bio-syngas at predicted maximum power condition.

Enomoto Hiroshi H Nakagawa Ryo R Yoshimichi Ayako A

Heliyon 20240711 15

In order to effectively utilize woody biomass, which has a low abundance density, it is necessary to develop a power generation system that can convert it with high efficiency even with a small capacity as less than 2 MW. For electricity generation, it is reasonable to use a small reciprocating engine. In the case of a naturally aspirated spark ignition reciprocating engine (SIRE), the amount of aspirated gas in one cycle is determined almost entirely by the displacement. The thermal efficiency ...[more]

PMID: 39145003

Similar Datasets

Project description:A micro-reciprocating piston internal combustion engine with liquid hydrocarbon fuel has the potential to supply ultrahigh density energy to micro electro mechanical system because of its high-density energy, simple structure, and mature energy conversion principle. However, the diagnostic test of the combustion characteristics of the micro reciprocating piston internal combustion engine shows that its combustion characteristics are poor, and the combustion rate was lower with the combustion duration of more than 50 °CA. The mean indicated pressure (Pmi) value was only 0.137 MPa, the combustion stability was very poor, and the cycle variation rate of the Pmi was up to 60%. To improve its combustion performance, the method to enhance combustion in micro-space is explored then. Mechanism studies have shown that the pyrolysis reaction of nitromethane and hydrogen peroxide can produce amounts of free radicals OH, with the possibility of improving the combustion of methanol. Therefore, a method for adjusting the composition of methanol fuel to enhance combustion is proposed, and the method is theoretically confirmed. Finally, based on this method, the test was carried out. The results showed that the combustion rate increased and the combustion duration decreased by 6% after adding nitromethane. The power performance was enhanced, and the Pmi value was increased by 30%. The combustion stability was enhanced, and the cycle variation rate of the Pmi was reduced to 16.9%. Nitromethane has a significant effect on improving the combustion characteristics of methanol, and the enhancement of the latter was mainly reflected in the ignition phase of the combustion process. This study indicates that exploring the fuel additive that can increase the concentration of OH radical in the reaction is an effective method to improve the micro-space combustion, which will facilitate the development of micro-piston internal combustion engine to supply energy to a micro electro mechanical system.

Project description:Laser and photocell quantum heat engines (QHEs) are powered by thermal light and governed by the laws of quantum thermodynamics. To appreciate the deep connection between quantum mechanics and thermodynamics we need only recall that in 1901 Planck introduced the quantum of action to calculate the entropy of thermal light, and in 1905 Einstein's studies of the entropy of thermal light led him to introduce the photon. Then in 1917, he discovered stimulated emission by using detailed balance arguments. Half a century later, Scovil and Schulz-DuBois applied detailed balance ideas to show that maser photons were produced with Carnot quantum efficiency (see Fig. 1A). Furthermore, Shockley and Quiesser invoked detailed balance to obtain the efficiency of a photocell illuminated by "hot" thermal light (see Fig. 2A). To understand this detailed balance limit, we note that in the QHE, the incident light excites electrons, which can then deliver useful work to a load. However, the efficiency is limited by radiative recombination in which the excited electrons are returned to the ground state. But it has been proven that radiatively induced quantum coherence can break detailed balance and yield lasing without inversion. Here we show that noise-induced coherence enables us to break detailed balance and get more power out of a laser or photocell QHE. Surprisingly, this coherence can be induced by the same noisy (thermal) emission and absorption processes that drive the QHE (see Fig. 3A). Furthermore, this noise-induced coherence can be robust against environmental decoherence.Fig. 1.(A) Schematic of a laser pumped by hot photons at temperature T(h) (energy source, blue) and by cold photons at temperature T(c) (entropy sink, red). The laser emits photons (green) such that at threshold the laser photon energy and pump photon energy is related by Carnot efficiency (4). (B) Schematic of atoms inside the cavity. Lower level b is coupled to the excited states a and ?. The laser power is governed by the average number of hot and cold thermal photons, and . (C) Same as B but lower b level is replaced by two states b(1) and b(2), which can double the power when there is coherence between the levels.Fig. 2.(A) Schematic of a photocell consisting of quantum dots sandwiched between p and n doped semiconductors. Open circuit voltage and solar photon energy ??(h) are related by the Carnot efficiency factor where T(c) is the ambient and T(h) is the solar temperature. (B) Schematic of a quantum dot solar cell in which state b is coupled to a via, e.g., solar radiation and coupled to the valence band reservoir state ? via optical phonons. The electrons in conduction band reservoir state ? pass to state ? via an external circuit, which contains the load. (C) Same as B but lower level b is replaced by two states b(1) and b(2), and when coherently prepared can double the output power.Fig. 3.(A) Photocell current j = ??(??) (laser photon flux P(l)/?(?(l))) (in arbitrary units) generated by the photovoltaic cell QHE (laser QHE) of Fig. 1C (Fig. 2C) as a function of maximum work (in electron volts) done by electron (laser photon) E(?) - E(?) + kT(c) log(?(??)/?(??)) with full (red line), partial (brown line), and no quantum interference (blue line). (B) Power of a photocell of Fig. 2C as a function of voltage for different decoherence rates , 100?(1c). Upper curve indicates power acquired from the sun.

Dataset Information

Economic analysis of reciprocating engine generating with bio-syngas at predicted maximum power condition.

Publications

Economic analysis of reciprocating engine generating with bio-syngas at predicted maximum power condition.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets