Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The Preparation of Thin Conductive Polyimide Foils for Nuclear Targets.

ABSTRACT: Thin and conductive plastic foils are of great interest to the target preparation and nuclear physics communities as a backing support for neutron-induced reaction measurements. This paper describes the preparation and characterization of thin, freestanding conductive polyimide films with an areal density suitable for target preparation in nuclear chemistry applications. The films were fabricated by blending a variety of graphene-based nanoparticles, a custom-made graphene suspension, and carbon nanotubes within a polymer matrix. The fabrication of freestanding polyimide films with an areal density of 30 μg/cm² (∼210 nm) was both time-consuming and difficult. Here, a novel approach is described that employs a sacrificial layer and graphene material to make thin (pure and conductive) polyimide foils readily available within 24 h.

SUBMITTER: Karpinska J

PROVIDER: S-EPMC11339984 | biostudies-literature | 2024 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

The Preparation of Thin Conductive Polyimide Foils for Nuclear Targets.

Karpinska Jolanta J Lewis David D Sibbens Goedele G Aregbe Yetunde Y

ACS omega 20240805 33

Thin and conductive plastic foils are of great interest to the target preparation and nuclear physics communities as a backing support for neutron-induced reaction measurements. This paper describes the preparation and characterization of thin, freestanding conductive polyimide films with an areal density suitable for target preparation in nuclear chemistry applications. The films were fabricated by blending a variety of graphene-based nanoparticles, a custom-made graphene suspension, and carbon ...[more]

PMID: 39184459

Similar Datasets

Preparation of Palladium/Silver-Coated Polyimide Nanotubes: Flexible, Electrically Conductive Fibers.

Project description:A simple and practical method for coating palladium/silver nanoparticles on polyimide (PI) nanotubes is developed. The key steps involved in the process are silver ion exchange/reduction and displacement reactions between silver and palladium ions. With the addition of silver, the conductivity of the PI nanotubes is greatly enhanced. Further, the polyimide nanotubes with a dense, homogeneous coating of palladium nanoparticles remain flexible after heat treatment and show the possibility for use as highly efficient catalysts. The approach developed here is applicable for coating various noble metals on a wide range of polymer matrices, and can be used for obtaining polyimide nanotubes with metal loaded on both the inner and outer surface.

| S-EPMC5706210 | biostudies-literature

Thermally conductive thin films derived from defect free graphene-natural rubber latex nanocomposite: Preparation and properties.

Project description:Commercially useful rubber products viz. gloves, condoms, tyres, and rubber hoses used in high temperature environments, etc., require efficient thermal conductivity, which increases the lifetime of these products. Graphene can fetch this property, if it is effectively incorporated into the rubber matrix. The great challenge in preparing graphene-rubber nanocomposites is formulating a scalable method to produce defect free graphene and its homogeneous dispersion into polymer matrices through an aqueous medium. Here, we used a simple method to produce defect free few layer (2-5) graphene, which can be easily dispersed into natural rubber (NR) latex without adversely affecting its colloidal stability. The resulting new composite showed large increase in thermal conductivity (480-980%) along with 40% increase in tensile properties and 60% improvement in electrical conductivity. This study provides a novel and generalized approach for the preparation of graphene based thermally conductive rubber nanocomposites.

| S-EPMC5465946 | biostudies-literature

AZ31 Magnesium Alloy Foils as Thin Anodes for Rechargeable Magnesium Batteries.

Project description:In recent decades, rechargeable Mg batteries (RMBs) technologies have attracted much attention because the use of thin Mg foil anodes may enable development of high-energy-density batteries. One of the most critical challenges for RMBs is finding suitable electrolyte solutions that enable efficient and reversible Mg cells operation. Most RMB studies concentrate on the development of novel electrolyte systems, while only few studies have focused on the practical feasibility of using pure metallic Mg as the anode material. Pure Mg metal anodes have been demonstrated to be useful in studying the fundamentals of nonaqueous Mg electrochemistry. However, pure Mg metal may not be suitable for mass production of ultrathin foils (<100 microns) due to its limited ductility. The metals industry overcomes this problem by using ductile Mg alloys. Herein, the feasibility of processing ultrathin Mg anodes in electrochemical cells was demonstrated by using AZ31 Mg alloys (3 % Al; 1 % Zn). Thin-film Mg AZ31 anodes presented reversible Mg dissolution and deposition behavior in complex ethereal Mg electrolytes solutions that was comparable to that of pure Mg foils. Moreover, it was demonstrated that secondary Mg battery prototypes comprising ultrathin AZ31 Mg alloy anodes (≈25 μm thick) and Mgx Mo6 S8 Chevrel-phase cathodes exhibited cycling performance equal to that of similar cells containing thicker pure Mg foil anodes. The possibility of using ultrathin processable Mg metal anodes is an important step in the realization of rechargeable Mg batteries.

| S-EPMC8596635 | biostudies-literature

Inhibition of Pseudomonas aeruginosa biofilm formation on copper-based thin foils.

Project description:The development of Healthcare-Associated Infections (HAIs) represents an increasing threat to patient health. In this context, Pseudomonas aeruginosa is responsible for various HAIs, determining about 20% of the infections in hospitalized patients, which makes it one of the most effective pathogens due to its strong ability to form biofilms. Using Cu-based materials as foils on high-touch surfaces can help to prevent and mitigate P. aeruginosa contamination in biohazardous settings. However, the antibiofilm properties of Cu-based surfaces against P. aeruginosa may vary due to frequent touches combined with indoor environmental exposure. The main aim of this study is to investigate the impact of accelerated ageing, mimicking a high-touch frequency by cyclic exposure to artificial sweat solution as well as to temperature and relative humidity variations, on the efficacy of Cu-based thin foils against P. aeruginosa biofilms. Three Cu-based materials (rolled and annealed Phosphorous High-Conductivity (PHC) Cu, Cu15Zn brass, and Cu18Ni20Zn nickel silver) were evaluated. The ageing process enhanced the antibiofilm properties, due to an increment in Cu ion release: aged PHC Cu and Cu15Zn exhibited the highest Cu ion release and hence the highest biofilm inhibition (decrease in colony forming unit (CFU)) in comparison to their pristine counterpart, while aged Cu18Ni20Zn displayed the lowest biofilm formation reduction, despite showing the highest aesthetic and morphological stability. The Cu-based surface, which highlited the highest biofilm formation inhibition due to accelerated ageing, was Cu15Zn.

| S-EPMC11620393 | biostudies-literature

Structural Effect of Polyimide Precursors on Highly Thermally Conductive Graphite Films.

Project description:In this study, polyimide (PI) with high carbonization yield was used as a precursor to prepare graphite films with high thermal conductivity. The crystallinity, grain size, and thermal conductivity of the graphite films were characterized and found to vary according to the chemical structure of the PI precursor. Aromatic PIs containing ortho-substituted hydroxyl groups in the PI main chain (DHB-BPDA) were synthesized by the polycondensation reaction of 3,3'-dihydroxybenzidine (DHB) and 3,3',4,4'-biphenyltetracarboxylic dianhydride (BPDA). The DHB-BPDA is converted to a polybenzoxazole (PBO) structure through thermolysis reaction during carbonization. The PBO containing a benzene ring and a heterocycle group can provide a strong main chain and high thermal stability due to its resonant structure. The graphite film prepared from DHB-BPDA exhibited a large grain size (63.727 nm) and a high thermal conductivity of 916 W/(mK).

| S-EPMC9330194 | biostudies-literature

Pool-Boiling Performance on Thin Metal Foils with Graphene-Oxide-Nanoflake Deposit.

Project description:The pool-boiling performance of water on thin metal foils with graphene-oxide deposition was studied. The boiling performance was evaluated both on fully coated surfaces, achieved by spin-coating, and surfaces with a laser-textured nucleation site, into which graphene oxide was added via drop-casting. During the experiments, a high-speed IR camera was used to obtain the transient temperature and heat-flux distribution. At the same time, a high-speed video camera was used to acquire synchronized bubble-growth recordings. In addition, a surface-wettability analysis was conducted for all the samples. In the case of fully coated samples, graphene-oxide deposition resulted in an increased number of active nucleation sites and an increase in the nucleation temperature, leading to a lowered nucleation frequency. Meanwhile, samples with a single laser-textured nucleation site enabled the analysis of isolated vapor bubbles, confirming that graphene-oxide deposition leads to a higher nucleation temperature, consequently resulting in a larger bubble-departure diameter and longer growth time. Two explanations for the results are proposed: the wettability of graphene-oxide deposition and the filling of surface microcavities with graphene-oxide nanoflakes.

| S-EPMC9414086 | biostudies-literature

Preparation of Aluminum Nanomesh Thin Films from an Anodic Aluminum Oxide Template as Transparent Conductive Electrodes.

Project description:We have employed anodic aluminum oxide as a template to prepare ultrathin, transparent, and conducting Al films with a unique nanomesh structure for transparent conductive electrodes. The anodic aluminum oxide template is obtained through direct anodization of a sputtered Al layer on a glass substrate, and subsequent wet etching creates the nanomesh metallic film. The optical and conductive properties are greatly influenced by experimental conditions. By tuning the anodizing time, transparent electrodes with appropriate optical transmittance and sheet resistance have been obtained. The results demonstrate that our proposed strategy can serve as a potential method to fabricate low-cost TCEs to replace conventional indium tin oxide materials.

| S-EPMC4735723 | biostudies-other

Preparation and Interfacial Properties of Hydroxyl-Containing Polyimide Fibers.

Project description:Developing polyimide (PI) fibers with excellent interfacial adhesion and high mechanical properties for the PI fiber-reinforced polymer matrix composites (PFRPs) industry has been challenging. In this work, 4,4'-diamino-(1,1'-biphenyl)-3,3'-diol (HAB) diamine was introduced into the rigid molecular chains, and the high-performance PI fibers, presenting an interfacial shear strength (IFSS) value of 46.33 MPa, tensile strength of 2.62 GPa, and modulus of 100.15 GPa, were successfully manufactured when the content of HAB in mixed diamines was 30 mol %. Fourier transform infrared (FTIR) spectroscopy identified the presence of intermolecular H-bonding interactions, and 2D small-angle X-ray scattering indicated that the introduction of HAB moiety contributed to reducing the radii of microvoids in the fibers, which were considered to be the key factors leading to a significant enhancement in the mechanical properties of the fibers. X-ray photoelectron spectroscopy (XPS) and the static contact angle intuitively illustrated that the synthetic fiber surface contained active hydroxyl groups. The IFSS value of PI fiber/epoxy resin composites (PI/EPs) was 56.47 MPa when the content of HAB reached 70 mol %. Failure morphologies confirmed that the interfacial adhesion of PI/EPs was enhanced owing to the surface activity of PI fibers. Consequently, this study provides an effective strategy to the long-standing problems of high mechanical performances and poor surface activity for traditional PI fibers used in the PFRPs industry.

| S-EPMC9967378 | biostudies-literature

Highly Thermal Conductive Graphite Films Derived from the Graphitization of Chemically Imidized Polyimide Films.

Project description:With the large-scale application and high-speed operation of electronic equipment, the thermal diffusion problem presents an increasing requirement for effective heat dissipation materials. Herein, high thermal conductive graphite films were fabricated via the graphitization of polyimide (PI) films with different amounts of chemical catalytic reagent. The results showed that chemically imidized PI (CIPI) films exhibit a higher tensile strength, thermal stability, and imidization degree than that of purely thermally imidized PI (TIPI) films. The graphite films derived from CIPI films present a more complete crystal orientation and ordered arrangement. With only 0.72% chemical catalytic reagent, the graphitized CIPI film achieved a high thermal conductivity of 1767 W·m-1·K-1, which is much higher than that of graphited TIPI film (1331 W·m-1·K-1), with an increase of 32.8%. The high thermal conductivity is attributed to the large in-plane crystallite size and high crystal integrity. It is believed that the chemical imidization method prioritizes the preparation of high-quality PI films and helps graphite films achieve an excellent performance.

| S-EPMC8840353 | biostudies-literature

Preparation and Properties of Low-Dielectric Polyimide Films Containing Tert-Butyl.

Project description:The design of high-performance polyimide (PI) films and understanding the relationship of the structure-dielectric property are of great significance in the field of the microelectronics industry, but are challenging. Herein, we describe the first work to construct a series of novel tert-butyl PI films (denoted as PI-1, PI-2, PI-3, and PI-4) based on a low-temperature polymerization strategy, which employed tetracarboxylic dianhydride (pyromellitic anhydride, 3,3',4,4'-biphenyl tetracarboxylic anhydride, 4,4'-diphenyl ether dianhydride, and 3,3',4,4'-benzophenone tetracarboxylic anhydride) and 4,4'-diamino-3,5-ditert butyl biphenyl ether as monomers. The results indicate that introducing tert-butyl branches in the main chain of PIs can enhance the free volume of the molecular chain and reduce the interaction between molecular chains of PI, resulting in a low dielectric constant. Particularly, the optimized PI-4 exhibits an excellent comprehensive performance with a high (5) wt% loss temperature (454 °C), tensile strength (117.40 MPa), and maximum hydrophobic angle (80.16°), and a low dielectric constant (2.90), which outperforms most of the results reported to date.

| S-EPMC11014062 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data