Radiation synthesis of sodium alginate/gelatin based ultra-absorbent hydrogel for efficient water and nitrogen management in wheat under drought stress
Ontology highlight
ABSTRACT:
SUBMITTER: El-diehy M
PROVIDER: S-EPMC11341720 | biostudies-literature | 2024 Jan
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:This study involved synthesis of a novel antibacterial heterocyclic compound, sodium 2-(2-(3-phenyl-1, 2, 4-oxadiazol-5-yl) phenoxy) acetate abbreviated as Na-POPA. Further development of a biocompatible, pH-responsive hydrogel drug carrier prepared utilizing the natural polymers gelatin and sodium alginate. The compound loaded on the hydrogel represented new drug delivery system. Comprehensive characterization of Na-POPA was performed using Fourier-transform infrared spectroscopy (FT-IR), proton nuclear magnetic resonance (¹H NMR), carbon-13 nuclear magnetic resonance (¹³C NMR), and high-resolution mass spectrometry (HRMS). The compound was loaded onto the sodium alginate/gelatin hydrogel carrier under feasible experimental conditions. The successful incorporation of Na-POPA into the hydrogel matrix was confirmed via scanning electron microscopy (SEM), powder X-ray diffraction (pXRD) analysis and FT-IR spectroscopy. Cytotoxicity assays revealed that the all the loaded and unloaded compound induced cell toxicity at large concentration much lower than many reported results. The hydrogel reduced the inherent cytotoxicity of Na-POPA and enhanced its biocompatibility. The release kinetics of Na-POPA from the hydrogel were evaluated spectrophotometrically at different pH conditions simulating biological fluids. The release rate at pH 1.2 was greater than the release at pH 6.8, with a higher cumulative release observed at pH 6.8. The release kinetics obeyed the pseudo-second-order kinetic model, indicating a controlled release mechanism influenced by the hydrogel's physicochemical properties. Electrochemical impedance spectroscopy and cyclic voltammetry further confirmed that the compound release was pH-dependent. The high swelling and solubility at pH 6.8 enhance the release. The larger amount released at 6.8 (target intestine) because of more solubility, leaching and swelling rather than shrinking.
| S-EPMC11589701 | biostudies-literature
Project description:Polyelectrolyte complexes of sodium alginate and gelatin obtained from cold-blooded fish were studied for potential application as structure-forming agents in food hydrogels. The mass ratio of sodium alginate to gelatin plays a decisive role in the sol-gel transition and rheological behavior of the complexes. Differences in the sol-gel transition temperature were observed upon heating and cooling, as is typical for such materials. We investigated the characteristics of this transition by measuring the isothermal changes in the elastic modulus over time at a constant frequency and the transition temperature at a range of frequencies. The kinetic nature of this transition depends on the composition of the complexes. A characteristic alginate-gelatin mass ratio is the ratio at which maximum transition temperature as well as elastic modulus and viscosity (rheological parameters) values are obtained; the characteristic mass ratio for these complexes was found to be 0.06. Calculation of the ionic group ratios in the biopolymers that form complexes and comparison of these data with the turbidimetric titration results clarified the origin of these maxima. Measuring the viscoelastic properties and the creep-elastic recoil of the samples allowed us to characterize these materials as viscoelastic media with a viscosity in the order of 103-104 Pa·s and an elastic modulus in the order of 102-103 Pa. These values drastically decrease at a certain stress threshold, which can be treated as the gel strength limit. Therefore, the observed rheological behavior of gels formed by fish gelatin modified with sodium alginate characterizes them as typical viscoelastic soft matter.
| S-EPMC7957763 | biostudies-literature
Project description:Alginate-gelatin hydrogels mimicking extracellular matrix (ECM) of soft tissues have been generated by static-dynamic double crosslinking, allowing fine control over the physical and chemical properties. Dynamic crosslinking provides self-healing and injectability attributes to the hydrogel and promotes cell migration and proliferation, while the static network improves stability. The static crosslinking was performed by enzymatic coupling of the tyrosine residues of gelatin with tyramine residues inserted in the alginate backbone, catalyzed by horseradish peroxidase (HRP). The dynamic crosslinking was obtained by functionalizing alginate with 3-aminophenylboronic acid which generates a reversible bond with the vicinal hydroxyl groups of the alginate chains. Varying the ratio of alginate and gelatin, hydrogels with different properties were obtained, and the most suitable for 3D soft tissue model development with a 2.5:1 alginate:gelatin molar ratio was selected. The selected hydrogel was characterized with a swelling test, rheology test, self-healing test and by cytotoxicity, and the formulation resulted in transparent, reproducible, varying biomaterial batch, with a fast gelation time and cell biocompatibility. It is able to modulate the loss of the inner structure stability for a longer time with respect to the formulation made with only covalent enzymatic crosslinking, and shows self-healing properties.
| S-EPMC10053920 | biostudies-literature
Project description:Due to the relatively poor cell-material interaction of alginate hydrogel, alginate-gelatin crosslinked (ADA-GEL) hydrogel was synthesized through covalent crosslinking of alginate di-aldehyde (ADA) with gelatin that supported cell attachment, spreading and proliferation. This study highlights the evaluation of the physico-chemical properties of synthesized ADA-GEL hydrogels of different compositions compared to alginate in the form of films. Moreover, in vitro cell-material interaction on ADA-GEL hydrogels of different compositions compared to alginate was investigated by using normal human dermal fibroblasts. Viability, attachment, spreading and proliferation of fibroblasts were significantly increased on ADA-GEL hydrogels compared to alginate. Moreover, in vitro cytocompatibility of ADA-GEL hydrogels was found to be increased with increasing gelatin content. These findings indicate that ADA-GEL hydrogel is a promising material for the biomedical applications in tissue-engineering and regeneration.
| S-EPMC4182442 | biostudies-literature
Project description:Main conclusionAlginate/wastepaper hydrogel mitigated sunflower drought stress by increasing the water holding capacity of the soil and decreasing phosphate leaching. The hydrogel promoted sunflower growth and decreased stress related biomarkers. There is a growing interest in the development of biodegradable hydrogels for the alleviation of drought stress on plants. A novel hydrogel based on brown algal-derived alginate and wastepaper was developed and tested as a soil supplement for sunflower growth under moderate (75% field capacity (FC)) and extreme (50% FC) water-deficit stress. The hydrogel showed fast swelling in water, which obeyed the pseudo-first order kinetics. Besides, it increased the water holding capacity of the soil and exhibited a good phosphate adsorption (37 mg PO4- g-1 hydrogel after 6 days) in the soil, and more than 67% of the adsorbed phosphate was desorbed after 20 days. Thus, the phosphate leaching from the hydrogel-amended soil in a column experiment was only 2.77 mg after 4 times of over-irrigation, compared to 11.91 mg without the hydrogel. The hydrogel application promoted various root traits such as fresh and dry biomass, area, and length by > 2-, > 1.6-, > 1.35-, and > 1.3-folds under both water regimes in relation to the no-hydrogel treatments at the same conditions. Furthermore, the sunflower shoots exhibited similar proline contents to the well-watered control (100% FC), with > 50% reduction in relation to the drought-stressed plants under the same conditions. Similarly, the malondialdehyde contents were lowered by > 15%. The analysis of the antioxidant enzymes also indicated a marked reduction in the specific activities of catalase and ascorbate peroxidase under both 75 and 50% FC compared to the respective controls. Additionally, the hydrogel promoted the uptake of phosphate by sunflower roots. These results implied that the developed biodegradable hydrogel could be effectively applied as a soil additive to alleviate drought stress on crops.
| S-EPMC10172250 | biostudies-literature
Project description:A gelatin/sodium alginate-based hydrogel microsphere has been fabricated after reaction condition optimization. Macrophages (RAW246.7) and adipose mesenchymal stem cells (ADSC) have been subsequently encapsulated in the microsphere in order to construct a 3D paracrine system for wound healing treatment. The synthesized microsphere displayed neglectable cytotoxicity toward both encapsulated cells until 10 days of incubation, indicating promising biocompatibility of the microsphere. A qRT-PCR and ELISA experiment revealed positive regulation of cytokines (Arg-1, IL-6, IL-8, IL-10, bFGF, HGF, VEGF, TLR-1, and CXCL13) expression regarding macrophage phenotype transformation and anti-inflammatory performance both inside the microsphere and in the microenvironment of established in vitro inflammatory model. Additionally, positive tendency of cytokine expression benefit wound healing was more pronounced in a fabricated 3D paracrine system than that of a 2D paracrine system. Furthermore, the 3D paracrine system exhibited more efficiently in the wound healing rate compared to the 2D paracrine system in an in vitro model. These results suggested the current paracrine system could be potentially used as a robust wound healing dressing.
| S-EPMC9867201 | biostudies-literature
Project description:Thromboembolism caused by the use of extracorporeal membrane oxygenation (ECMO) remains common among patients with existing heart diseases and contributes to significant morbidity and mortality during the COVID-19 pandemic. Various surface modification strategies have been proposed, showing that the methacrylated alginate (MA-SA) hydrogel layer is transparent, which aids the observation of the thromboembolism from the inner wall of the tubing. In the combined dynamic and static blood of ECMO tubing inner surface in vitro experiments, it was also demonstrated that the adhesion of blood clots to the surface of vessels was remarkably reduced, and the MA-SA-based hydrogel coating could significantly prolong the activated partial thrombin time and block the endogenous coagulation. The favorable properties of natural polysaccharides of hydrogel coatings make them the best surface material choices to be applied for blood-contacting medical devices and significantly improve anticoagulant performance.
| S-EPMC9663475 | biostudies-literature
Project description:Tissue-engineered skin grafts have long been considered to be the most effective treatment for large skin defects. Especially with the advent of 3D printing technology, the manufacture of artificial skin scaffold with complex shape and structure is becoming more convenient. However, the matrix material used as the bio-ink for 3D printing artificial skin is still a challenge. To address this issue, sodium alginate (SA)/carboxymethyl cellulose (CMC-Na) blend hydrogel was proposed to be the bio-ink for artificial skin fabrication, and SA/CMC-Na (SC) composite hydrogels at different compositions were investigated in terms of morphology, thermal properties, mechanical properties, and biological properties, so as to screen out the optimal composition ratio of SC for 3D printing artificial skin. Moreover, the designed SC composite hydrogel skin membranes were used for rabbit wound defeat repairing to evaluate the repair effect. Results show that SC4:1 blend hydrogel possesses the best mechanical properties, good moisturizing ability, proper degradation rate, and good biocompatibility, which is most suitable for 3D printing artificial skin. This research provides a process guidance for the design and fabrication of SA/CMC-Na composite artificial skin.
| S-EPMC8395816 | biostudies-literature
Project description:Implantable hydrogel-based bioelectronics (IHB) can precisely monitor human health and diagnose diseases. However, achieving biodegradability, biocompatibility, and high conformality with soft tissues poses significant challenges for IHB. Gelatin is the most suitable candidate for IHB since it is a collagen hydrolysate and a substantial part of the extracellular matrix found naturally in most tissues. This study used 3D printing ultrafine fiber networks with metamaterial design to embed into ultra-low elastic modulus hydrogel to create a novel gelatin-based conductive film (GCF) with mechanical programmability. The regulation of GCF nearly covers soft tissue mechanics, an elastic modulus from 20 to 420 kPa, and a Poisson's ratio from - 0.25 to 0.52. The negative Poisson's ratio promotes conformality with soft tissues to improve the efficiency of biological interfaces. The GCF can monitor heartbeat signals and respiratory rate by determining cardiac deformation due to its high conformability. Notably, the gelatin characteristics of the biodegradable GCF enable the sensor to monitor and support tissue restoration. The GCF metamaterial design offers a unique idea for bioelectronics to develop implantable sensors that integrate monitoring and tissue repair and a customized method for endowing implanted sensors to be highly conformal with soft tissues.
| S-EPMC10686972 | biostudies-literature
Project description:The nasty urine microenvironment (UME) is an inherent obstacle that hinders urethral repair due to fibrosis and swelling of the oftentimes adopted hydrogel-based biomaterials. Here, using reduced graphene oxide (rGO) along with double-freeze-drying to strengthen a 3D-printed patch is reported to realize scarless urethral repair. The sodium alginate/gelatin/reduced graphene oxide (SA/Gel/rGO) biomaterial features tunable stiffness, degradation profile, and anti-fibrosis performance. Interestingly, the 3D-printed alginate-containing composite scaffold is able to respond to Ca2+ present in the urine, leading to enhanced structural stability and strength as well as inhibiting swelling. The investigations present that the swelling behaviors, mechanical properties, and anti-fibrosis efficacy of the SA/Gel/rGO patch can be modulated by varying the concentration of rGO. In particular, rGO in optimal concentration shows excellent cell viability, migration, and proliferation. In-depth mechanistic studies reveal that the activation of cell proliferation and angiogenesis-related proteins, along with inhibition of fibrosis-related gene expressions, play an important role in scarless repair by the 3D-printed SA/Gel/rGO patch via promoting urothelium growth, accelerating angiogenesis, and minimizing fibrosis in vivo. The proposed strategy has the potential of resolving the dilemma of necessary biomaterial stiffness and unwanted fibrosis in urethral repair.
| S-EPMC10787096 | biostudies-literature